2002 Polaris Sportsman 6x6 Owners Manual - Page 53

OPERATION Vehicle Break-in Period The break-in period for your new Polaris 6x6 is defined as the first ten hours of operation or the time it takes to use the first two tanks of gasoline. No single action on your part is as important as a proper break-in period. Careful treatment of a new engine will result in more efficient performance and longer life for the engine. Perform the following procedures carefully. CAUTION Use only Polaris Premium 4 All Season synthetic oil, or API certified "SH" oil. Never substitute or mix oil brands. Serious engine damage and voiding of warranty can result. 1. Fill fuel tank with either unleaded or leaded fuel which has a minimum pump octane number of 87= (R+ M)/2. 2. Check oil reservoir level indicated on dipstick. Add oil if necessary. ADD 8 OZ. NORMAL FULL 3. Drive slowly at first. Maintain Oil Level In Normal Range Select an area which is open and will give you room to familiarize yourself with vehicle operation and handling. 4. Vary the throttle positions. Do not operate at sustained idle. CAUTION Do not operate at full throttle or high speeds for extended periods during the first three hours of use. Excessive heat can build up and cause damage to close fitted engine parts. 5. Perform regular checks on fluid levels, controls and all important areas on the vehicle as outlined earlier on the daily pre-ride inspection checklist found on page 12. 6. Pull only light loads. 7. Break in oil and filter. Change at 20 hours or 200 miles. 50