2008 Polaris Sportsman 6x6 Owners Manual - Page 47
2008 Polaris Sportsman 6x6 Manual
Page 47 highlights
FEATURES AND CONTROLS All Wheel Drive (AWD) System Disengaging Wheel Hubs The hubs normally disengage when operating in reverse. However, one or both hubs may occasionally remain engaged. If the handlebars pull to one side, one front hub is engaged. If both hubs are engaged, steering effort increases but remains balanced from left to right, and vehicle speed is somewhat restricted. 1. Stop the vehicle and shift to reverse gear. 2. Operate in reverse for a short distance. 3. Stop the vehicle and shift to forward gear. NOTE: If the hubs remain engaged after following this procedure, return the vehicle to your dealer for service. To continue using AWD while operating in reverse, activate both the override switch and the AWD switch. See page 34. WARNING Operating with only one front hub engaged could result in loss of control, accident, and severe injury or death. When hub engagement symptoms are present, use the disengaging procedure before proceeding. Tool Kit To help you perform routine maintenance, a tool kit is provided in the storage compartment under the seat. Items included in the kit are: • Screwdriver • Open end wrench (8-10 mm) • Open end wrench (12-14 mm) • Box end wrench • Tire pressure gauge • Spark plug wrench and handle 44