2014 Polaris Turbo IQ LXT Owners Manual - Page 102
2014 Polaris Turbo IQ LXT Manual
Page 102 highlights
MAINTENANCE Engine Oil Oil Change 18. Remove the oil filter cap, then remove the oil filter. Inspect the oring and replace it if it's worn or damaged. 19. Install a new filter, then reinstall the cap. Tighten the cap to 18.5 ft. lbs. (25 Nm). 20. Remove the jumper from the starter motor wiring harness. Reconnect the solenoid and the originally-installed harness. Reinstall the 20A EFI Fuse. 21. Remove the dipstick from the oil tank. Add 2 quarts (1.9 liters) of the recommended oil. Reinstall the dipstick. 22. Start the engine and allow it to idle for 3-5 minutes. Make sure the engine coolant temperature is between 145° and 160° F. (63°-71° C). 23. Stop the engine. 24. Remove the dipstick from the oil tank. Clean the dipstick with a clean shop towel and reinstall it, screwing it in completely. 25. Remove the dipstick and view the oil level. Fill mark for oil changes (at specified coolant temperature) Safe operating range 100