2014 Polaris Turbo IQ LXT Owners Manual - Page 64
2014 Polaris Turbo IQ LXT Manual
Page 64 highlights
THE PERFECT FIT Handlebar Adjustments Use the RIDER SELECT feature to adjust handlebar position. See page 34. Use the following steps to adjust handlebar angle at the handlebar block. 1. Remove the handlebar cover to expose the handlebar and the four adjuster block bolts. 2. Using a 7/16" wrench, loosen the four nuts on the bottom of the adjuster block (turn handlebar to left or right for access to back nuts). Tip: If necessary, pry the blocks apart with a screwdriver. Handlebar Cover 3. Adjust the handlebar to the desired height. Be sure handlebars, brake lever and throttle lever operate smoothly and do not hit the Nuts gas tank, windshield or any other part of the snowmobile when turned fully to the left or right. 4. Torque the front bolts first, then torque the rear bolts. Torque the bolts to 15-17 ft. lbs. (20-23 Nm). 5. Reinstall the handlebar cover. Adjuster Block Bolts 62