2014 Polaris Turbo IQ LXT Owners Manual - Page 127
2014 Polaris Turbo IQ LXT Manual
Page 127 highlights
MAINTENANCE Clutch System Drive Belt Condition Periodically check the condition and tension of the drive belt, and always carry a spare. Inspect the belt for signs of excessive wear: frayed edges, missing cogs, cracks and excessive looseness. Replace the belt if any of these conditions exist. See Drive Belt Troubleshooting on page 149. For improved drive-away during extremely cold temperatures, remove the belt and warm it to room temperature. Reinstall it before starting the snowmobile. Drive Belt Deflection Measure belt deflection with both clutches at rest and in their full neutral position. Place a straight edge on the belt and apply downward pressure while measuring at point A. This measurement should be 1 1/4" (3.2 cm). Measure A Straight Edge Drive Belt Adjustment TEAM Clutch 1. Loosen the 7/16" jam nut on the belt width adjuster. 2. Using a 1/8" Allen wrench, adjust the threaded set screw as needed. Tip: Turn the set screw in (clockwise) to increase the distance between the sheaves and out (counterclockwise) to decrease the distance. 3. Tighten the jam nut. 125
![](/manual_guide/autos/2014-polaris-turbo-iq-lxt-owners-manual-951e52e/127.png)