2015 Polaris RZR XP 1000 EPS High Lifter Edition Owners Manual - Page 29
2015 Polaris RZR XP 1000 EPS High Lifter Edition Manual
Page 29 highlights
FEATURES AND CONTROLS Switches Headlight Switch Use the headlight switch to turn the lights on and HIGH off and to change the lights from high beam to low beam. The ignition switch must be in the ON LOW position to operate the headlights. Press the top of the rocker switch for high beam. OFF Move the rocker switch to the center position for low beam. Press the bottom of the rocker switch to turn headlights off. If the headlight switch is ON when the ignition switch is turned off, the lights will remain on for approximately 30 seconds. All Wheel Drive (AWD) Switch Press the top of the rocker switch to engage All Wheel Drive. Press the bottom of the switch to operate in two wheel drive. See page 36 for AWD operating instructions. AWD 2WD Winch Switch Press the top of the rocker switch to spool line out from the winch. Press the bottom of the rocker switch to spool line in to the winch. Move the rocker switch to the center position to stop spooling. OUT OFF IN Remote Winch Switch Pull the remote winch switch and cable out from the dash storage area. Press and hold the left side of the switch to spool line out from the winch. Press and hold the right side of the switch to spool line in to the winch. Release the switch and it returns to the center "OFF" position to stop spooling. OUT IN OFF 27