2015 Polaris RZR XP 1000 EPS High Lifter Edition Owners Manual - Page 89

2015 Polaris RZR XP 1000 EPS High Lifter Edition Manual

Get 2015 Polaris RZR XP 1000 EPS High Lifter Edition PDF manuals and user guides View all 2015 Polaris RZR XP 1000 EPS High Lifter Edition manuals

Page 89 highlights

MAINTENANCE Engine Oil Oil and Filter Change 6. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to make sure the o-ring is in good condition. 7. Install the new filter and turn by hand until the filter gasket contacts the sealing surface, then turn and additional 1/2 turn. 8. Reinstall the crankcase drain plug. Torque to 12 ft. lbs. (16 Nm). 9. Remove the oil fill cap and add 2.5 quarts (2.4 l) of recommended oil. Reinstall the fill cap. 10. Remove the dipstick. Wipe it dry with a clean cloth. 11. Reinstall the dipstick completely. Remove the dipstick and check the oil level. 12. Remove the oil fill cap to add the recommended oil as needed. Maintain the oil level between the minimum and maximum marks on the dipstick. Do not overfill. 13. Reinstall the fill cap. 14. Reinstall the dipstick. 15. Dispose of used filter and oil properly. 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
87
MAINTENANCE
Engine Oil
Oil and Filter Change
6.
Lubricate the o-ring on the new filter with a film of fresh engine oil.
Check to make sure the o-ring is in good condition.
7.
Install the new filter and turn by hand until the filter gasket contacts
the sealing surface, then turn and additional 1/2 turn.
8.
Reinstall the crankcase drain plug. Torque to 12 ft. lbs. (16 Nm).
9.
Remove the oil fill cap and add 2.5 quarts (2.4 l) of recommended
oil. Reinstall the fill cap.
10.
Remove the dipstick. Wipe it dry with a clean cloth.
11.
Reinstall the dipstick completely. Remove the dipstick and check
the oil level.
12.
Remove the oil fill cap to add the recommended oil as needed.
Maintain the oil level between the minimum and maximum marks
on the dipstick. Do not overfill.
13.
Reinstall the fill cap.
14.
Reinstall the dipstick.
15.
Dispose of used filter and oil properly.