2015 Polaris RZR XP 1000 EPS High Lifter Edition Owners Manual - Page 99

2015 Polaris RZR XP 1000 EPS High Lifter Edition Manual

Get 2015 Polaris RZR XP 1000 EPS High Lifter Edition PDF manuals and user guides View all 2015 Polaris RZR XP 1000 EPS High Lifter Edition manuals

Page 99 highlights

MAINTENANCE Cooling System Radiator Coolant Level/Changing Coolant This procedure is required only if the cooling system has been drained for maintenance and/or repair. If the overflow bottle has run dry, the level in the radiator should also be inspected. CAUTION! Escaping steam can cause burns. Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap. 1. Remove the hood. See page 30. 2. Slowly remove the radiator pressure cap. 3. View the coolant level through the opening. 4. Use a funnel and slowly add coolant as needed. 5. Before reinstalling the pressure cap, bleed the system of trapped air. Remove the engine access panel behind the seats and use a flat-blade screwdriver to turn the bleed screw slightly, allowing the air to escape. Slowly add additional coolant to the radiator until air no longer escapes and only coolant flows from the bleed hole, then tighten the bleed screw. 6. Reinstall the pressure cap. Tip: Use of a non-standard pressure cap will not allow the recovery system to function properly. See your dealer for the correct replacement part. Overflow Bottle Pressure Cap Bleed Screw 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
97
MAINTENANCE
Cooling System
Radiator Coolant Level/Changing Coolant
This procedure is required only if the cooling system has been drained
for maintenance and/or repair. If the overflow bottle has run dry, the
level in the radiator should also be inspected.
CAUTION!
Escaping steam can cause burns. Never remove the pressure cap
while the engine is warm or hot. Always allow the engine to cool before
removing the pressure cap.
1.
Remove the hood. See page
30.
2.
Slowly remove the radiator
pressure cap.
3.
View the coolant level
through the opening.
4.
Use a funnel and slowly add
coolant as needed.
5.
Before reinstalling the
pressure cap, bleed the
system of trapped air.
Remove the engine access
panel behind the seats and
use a flat-blade screwdriver
to turn the bleed screw
slightly, allowing the air to
escape. Slowly add
additional coolant to the
radiator until air no longer
escapes and only coolant
flows from the bleed hole,
then tighten the bleed screw.
6.
Reinstall the pressure cap.
Tip:
Use of a non-standard pressure
cap will not allow the recovery
system to function properly. See
your dealer for the correct
replacement part.
Bleed Screw
Pressure Cap
Overflow Bottle