2005 Pontiac GTO Owner's Manual - Page 127

Trip Computer The buttons for the trip computer are located on the instrument panel, to the right of the instrument panel cluster. The trip computer can be reset when AVG SPEED or TRIP TIME are shown on the left display. To reset, press the SET button for less than two seconds. Resetting does not affect the Odometer, Overspeed, Range, Time to Arrival, Distance to Arrival, Instantaneous Fuel, or Fuel Remaining. Vehicle personalization is available through the trip computer controls and display. See Vehicle Personalization on page 2-30. AVG (Average) SPEED This function shows the average speed, while the engine is running, since the trip computer was reset. Odometer The trip computer displays are located directly beneath the instrument panel cluster gages. Speed related information appears in the left display, distance related information appears in the center display, and fuel related information appears in the right display. The basic, more commonly used functions of the trip computer are shown following. Tap the MODE button to scroll between the different sets of displays. When the ignition is turned to ON, the trip computer displays the same functions as when the ignition was last turned off. This function records miles travelled since the car was built. AVG (Average) FUEL This function shows the average fuel used since the trip computer was reset. After resetting, a high number may initially be shown, due to the short distance travelled and the high fuel used when accelerating. 3-33