2005 Pontiac GTO Owner's Manual - Page 235

3. Remove the wiring harness connector by squeezing the two tabs on the connector and pulling the connector down. 4. Remove the old bulb by twisting the bulb counterclockwise. Front Turn Signal and Parking Lamps To replace a front turn signal or parking lamp bulb, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Follow the removal procedure for either the driver's side or passenger's side of the vehicle to access the bulbs. See Headlamps on page 5-47 for more information. 3. Disconnect the wiring harness connector from the bulb assembly. 4. Turn the bulb socket counterclockwise and remove. 5. Install the new bulb without touching it. 6. Reverse the steps to reinstall the headlamp assembly. 5. Lightly press the bulb and twist counterclockwise out of the socket. 6. Insert the new bulb and install the bulb socket. The bulb should be colored orange. 7. Reconnect the wiring harness connector. 8. Reinstall the battery or radiator cover. See Headlamps on page 5-47 for more information. 5-49