2009 Saab 9-3 Owner's Manual - Page 260

93_US_7carcare_MY09.fm Page 260 Tuesday, April 15, 2008 11:26 AM 260 Car care Marking of jacking points Jacking points Removing the plastic wheel bolt covers 1 Wind the jack up to a suitable height before placing it under the jacking point. Each jacking point is indicated by an arrow on the sill (see illustration). Make sure that the jack fully engages the jacking point in the underside of the sill member and that the entire foot of the jack is steady and flat on the ground. The jack must not stand on snow, ice or similar. Wind up the jack until it just begins to lift the car. 2 It is not necessary to remove the wheel cover. If, none the less, you wish to remove the wheel cover, take hold of the outer edge and pull it straight out. Remove the plastic wheel bolt covers. Loosen the wheel bolts half a turn. 3 Wind the jack to raise the wheel clear of the ground. Remove the wheel bolts and lift off the wheel. IB4529