2008 Saturn Outlook Owner's Manual - Page 156
2008 Saturn Outlook Manual
Page 156 highlights
Flash-to-Pass With the turn signal lever in the low-beam position, pull the lever toward you momentarily to switch to high-beam, to signal that you are going to pass. If the headlamps are on, they will return to low-beam when the lever is released. Clear ice and snow from the wiper blades before using them. If the blades are frozen to the windshield, gently loosen or thaw them. If they become damaged, install new blades or blade inserts. See Windshield Wiper Blade Replacement on page 5-48. Heavy snow or ice can overload the wipers. A circuit breaker stop them until the motor cools. Windshield Wipers The windshield wiper/washer lever is located on the right side of the steering column. Turn the band with the wiper symbol to control the windshield wipers. Windshield Washer J (Washer Fluid): Press the button located at the end of the turn signal/multifunction lever, to spray washer fluid on the windshield. The wipers clear the windshield and either stop or return to the preset speed. The ignition key must be in ACC/ACCESSORY or ON/RUN for this to work. See Windshield Washer Fluid on page 5-33 Windshield Washer Fluid. 8 (Mist): Turn the band to mist for a single wiping cycle and then release. The wipers stop after one wipe. Hold the band on 8 longer, for more wipe cycles. 9 (Off): Turns the wipers off. { CAUTION: In freezing weather, do not use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. 6 (Delay): Adjusts the delay time. The delay between wiping cycles becomes shorter as the band is moved to the top of the lever. 1 (Low Speed): For steady wiping at low speed. 2 (High Speed): For steady wiping at high speed. 3-10