2008 Saturn Outlook Owner's Manual - Page 415

Storing the Tools Put back all tools as they were stored in the jack storage compartment and put the compartment cover back on. 1. Attach the tool bag to the jack. 2. Make sure that the bottom of the jack is facing toward you. 3. Turn the jack (C) on its side and place it down on the holding bracket. 4. Reinstall the wing bolt (B) by turning it clockwise. 5. To replace the cover, line up the tabs on the bottom of the cover with the slots in the cover opening. Push the cover in place, insuring that the upper front and rear tabs are in the opening and push the cover closed. The center latch should be fully engaged. This secures the cover in place. A. Tool Bag B. Wing Bolt C. Jack Store the center cap or the plastic bolt-on wheel covers until a full size tire is put back on the vehicle. When you replace the compact spare with a full-size tire, reinstall the bolt-on wheel covers or the center cap. Hand-tighten them over the wheel nuts, using the lug wrench. 5-99