2006 Toyota Sienna Owners Manual
2006 Toyota Sienna Manual
2006 Toyota Sienna manual content summary:
- 2006 Toyota Sienna | Owners Manual - Page 1
System Owner's Manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual your vehicle and the safety of your passengers. Do not use any feature of this system to the extent it becomes a distraction - 2006 Toyota Sienna | Owners Manual - Page 2
, etc.) frequently change. Therefore, before following any instruction from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure - 2006 Toyota Sienna | Owners Manual - Page 3
...9 Current position display ...9 Screen scroll operation ...9 Switching the screens ...13 Map scale ...15 Foot print map ...16 Orientation of the map ...18 Example of navigation system operation ...18 Guiding the route ...18 Registering home ...20 1 - 2006 Toyota Sienna | Owners Manual - Page 4
initial screen will be displayed and the system will begin operating. Under extremely cold conditions, the display may react slowly or operation sound may become louder. CAUTION When the vehicle is stopped with the engine running, always apply the parking brake for safety. After a few seconds, the - 2006 Toyota Sienna | Owners Manual - Page 5
BASIC FUNCTIONS D Maintenance information This system informs about when to replace certain parts or components and shows dealer information (if registered) on the screen. When the vehicle reaches a previously set driving distance or date specified for a - 2006 Toyota Sienna | Owners Manual - Page 6
. To prevent damage to the screen, lightly touch the touch-screen buttons on the screen with the finger. When a touchscreen button on the screen is touched, a beep sounds. Do not use objects other than the finger to touch the screen. D Under extremely cold conditions, the map may not be displayed - 2006 Toyota Sienna | Owners Manual - Page 7
BASIC FUNCTIONS D To input letters To display the alphabet keys, touch "A-Z" or On certain letter entry screens, letters can be entered in upper or lower case. D To input numerals and symbols To display the number keys and symbol keys, touch "0-9" . " ". : Enter letters by touching the - 2006 Toyota Sienna | Owners Manual - Page 8
The number of matching items is shown to the right side of the screen. If the number of matching items is more than 9,999, the system displays on the screen. To shift to the next or previous page. To scroll up or down one item at a time. This expresses a displayed screen - 2006 Toyota Sienna | Owners Manual - Page 9
BASIC FUNCTIONS If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name. D Sorting The order of a list displayed on the screen can be rearranged. TYPE A 1. - 2006 Toyota Sienna | Owners Manual - Page 10
BASIC FUNCTIONS TYPE B Function help Explanations for the functions of the "Destination", "Setup", and "Menu" screens can be viewed. : "Dist. Sort": To sort in the order of distance from the current vehicle location. The distance from current vehicle position up to the destination is displayed to - 2006 Toyota Sienna | Owners Manual - Page 11
. As soon as the system receives signals from the GPS, the correct current position is displayed. D To correct the current position manually, see "D Current position/tire change calibration" on page 87. The current vehicle position mark ( 1 ) appears in the center or bottom center of the map screen - 2006 Toyota Sienna | Owners Manual - Page 12
VOICE" button is pushed, the current vehicle position mark returns to the center of the screen and the map moves as the vehicle proceeds along the vehicle position map location display. Touch "Enter ". The screen changes and displays the map location of the selected destination and the route - 2006 Toyota Sienna | Owners Manual - Page 13
on a POI icon, the name and "Info." are displayed on the top of the screen. The registered point is shown by on the map. To change the icon or name, etc., see " - Editing memory points" on page 71. Up to 106 memory points can be registered. If there is an attempt - 2006 Toyota Sienna | Owners Manual - Page 14
and "Info." are displayed on the top of the screen. If there is already a set destination, "Add to " and "Replace " are displayed. "Add to ": To add a destination. "Replace ": To delete the existing destinations and set a new one. To edit a memory point, touch "Edit". (See " - Editing memory points - 2006 Toyota Sienna | Owners Manual - Page 15
BASIC FUNCTIONS DESTINATION INFORMATION When the cursor is set on a destination icon, the name and "Info." are displayed on the top of the screen. - Switching the screens Any one of the screen configurations can be selected. Information such as the name, address, and phone number are displayed. - 2006 Toyota Sienna | Owners Manual - Page 16
BASIC FUNCTIONS Depending on the conditions, certain screen configuration buttons cannot be selected. : To display the single map screen. (See page 14.) : To display the dual map screen. (See page 14.) : - 2006 Toyota Sienna | Owners Manual - Page 17
scale This screen can perform the following procedures: 1. Changing the map scale 2. Displaying the POI icon 3. Changing the orientation of the map Touch scale bar changes smoothly. The scale of the map display can be changed by touching the scale bar directly. It is not available while driving. - 2006 Toyota Sienna | Owners Manual - Page 18
a scale of 75 feet (25 m). D To switch to the foot print map changes into when the map is scaled down to 150 feet (50 m). INFORMATION D If the to the area which is not covered by the foot print map, the screen scale automatically changes to 150 feet (50 m). D On the foot print map, a one way street - 2006 Toyota Sienna | Owners Manual - Page 19
BASIC FUNCTIONS D To display building information Information is available only for buildings for which information is recorded on the map disc. 2. Using an eight-direction arrow, move the cursor to the position of the - 2006 Toyota Sienna | Owners Manual - Page 20
the map The orientation of the map can be changed from north-up to heading-up by touching the of vehicle travel is always up. A red arrow indicates North. Example of navigation system operation - - Guiding the route Guidance to a destination occurs by specifying the destination using the "POI - 2006 Toyota Sienna | Owners Manual - Page 21
displayed in a list. Even if the entered name is incomplete, touching "List" displays the list. 4. Select the destination from the displayed list. 5. Touch "Enter". The system starts route search and displays recommended routes. 19 - 2006 Toyota Sienna | Owners Manual - Page 22
search by Home" on page 26.) 1. Push the "MENU" button. 6. Touch "Guide". Route guidance starts. Guidance is done by both the screen and voice. (See "Route .) 3. Touch "Register". INFORMATION It is possible to change the route. (See "Starting route guidance" on page 43.) 2. Touch "My - 2006 Toyota Sienna | Owners Manual - Page 23
BASIC FUNCTIONS 5. Enter the house number. 6. Enter the street name. Every touch on a letter key narrows the selection. Letters that cannot be selected in the database are dimmed out. When there are four or fewer database items, these items are displayed in a list. Even if the entered name is - 2006 Toyota Sienna | Owners Manual - Page 24
BASIC FUNCTIONS 8. Touch "Enter". Registration of home is complete and the "Memory Point" screen is displayed. Registered "Home" information will be displayed. The icon, quick access, name, location, and phone number can be changed. (See " - Editing memory points" on page 71.) 22 - 2006 Toyota Sienna | Owners Manual - Page 25
DESTINATION SEARCH SECTION DESTINATION SEARCH Destination search II 24 24 26 27 27 31 35 38 39 39 40 40 41 42 42 43 Destination search ...Selecting the search area ...Destination search by Home ...Destination search by Quick access ...Destination search by "Address" ...Destination search by "POI - 2006 Toyota Sienna | Owners Manual - Page 26
destination. (See pages 26 through 43.) INFORMATION When searching the destination, the response to the touch-screen button may be slow. 1. Touch "Change" on the "Destination" screen to display a map of the United States and Canada divided into 11 areas. (For map database information and updates - 2006 Toyota Sienna | Owners Manual - Page 27
DESTINATION SEARCH SELECTING THE SEARCH AREA ON THE INPUT SCREEN Change the search area in order to set a destination from a different area by using "Address", "POI Name", "Freeway Ent./Exit", or "Intersection". U.S.A. Button "US1" "US2" States - 2006 Toyota Sienna | Owners Manual - Page 28
in Canada included in this button. - Destination search by Home "US8" "US9" Touch the home touch-screen button on the "Destination" screen. The screen changes and displays the map location for home and the route preference. (See "Starting route guidance" on page 43.) To use this function, it is - 2006 Toyota Sienna | Owners Manual - Page 29
Destination" screen. (a) Inputting a house number and a street name Touch any of the quick access touchscreen buttons on the "Destination" screen. The screen changes and displays the map location of the quick access point and the route preference. (See "Starting route guidance" on page 43.) To use - 2006 Toyota Sienna | Owners Manual - Page 30
destination and the route preference. (See "Starting route guidance" on page 43.) If the same address exists in more than one city, the current screen changes to the city list screen. 4. Select or enter the desired city. "Input Name": To narrow down the listed items by inputting the city name. 28 - 2006 Toyota Sienna | Owners Manual - Page 31
DESTINATION SEARCH (b) Selecting a city to search If inputting a street name first, the screen changes. The house number can then be input. If the same address exists in more than one city, the current screen changes to the city list screen. Touch "City". If the above screen appears, an address - 2006 Toyota Sienna | Owners Manual - Page 32
methods are possible. 1. Input the city name 2. Select from the nearest 5 cities 3. Select from the last 5 cities 2. Input a city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the touch-screen button of the desired - 2006 Toyota Sienna | Owners Manual - Page 33
-screen button of the desired city name. If the navigation has not be used, no cities will be displayed on the screen. The current screen changes to the screen for inputting a house number or a street name. (See "(a) Inputting a house number and a street name" on page 27.) 2. Input the name of the - 2006 Toyota Sienna | Owners Manual - Page 34
DESTINATION SEARCH (a) Selecting a city to search 3. Touch the touch-screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) When inputting the name of a - 2006 Toyota Sienna | Owners Manual - Page 35
nearest 5 cities 3. Select from the last 5 cities 2. Input the city name. 2. Touch the touch-screen button of the desired city name. INFORMATION D To change the search area, touch "Search Area". D To cancel the city setting, touch "Any City". 3. Touch the touch-screen button of the desired city - 2006 Toyota Sienna | Owners Manual - Page 36
DESTINATION SEARCH SELECTING FROM THE LAST 5 CITIES (b) Selecting from the categories If the desired POI category is not on the screen, touch "List All Categories" to list all POI categories. Touch the touch-screen button of the desired city name. If the navigation has not be used, no cities - 2006 Toyota Sienna | Owners Manual - Page 37
"Enter". The search point is set and the "POI Category" screen will be displayed. Set the search point by the following method: 1. Input the city center 2. Set the current position as the search point 3. Set the search point via the map screen 4. Set the search point from any destination It is - 2006 Toyota Sienna | Owners Manual - Page 38
DESTINATION SEARCH SETTING THE CURRENT POSITION AS THE SEARCH POINT Touch "Current Position". The search point is set at the current position, and the "POI Category" screen will be displayed. SETTING THE SEARCH POINT VIA THE MAP SCREEN 1. Touch "Map". SETTING THE SEARCH POINT FROM DESTINATIONS 1. - 2006 Toyota Sienna | Owners Manual - Page 39
DESTINATION SEARCH D To search POIs near the search point When the search point is set, the "POI Category" screen will be displayed. Select the desired POI categories. "List": If the desired POI categories have already been selected, a list of POI will be displayed from among the selected - 2006 Toyota Sienna | Owners Manual - Page 40
touch-screen button of the desired destination. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) INFORMATION The navigation system does not guide in areas where route guidance is unavailable. (See page - 2006 Toyota Sienna | Owners Manual - Page 41
are no longer necessary. (See " - Deleting previous points" on page 80.) 2. Touch the touch-screen button of your desired memory point. The screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) The previous - 2006 Toyota Sienna | Owners Manual - Page 42
the destination to be set. 3. Touch the touch-screen button of the desired item. After inputting the two intersecting streets, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) INFORMATION Guidance - 2006 Toyota Sienna | Owners Manual - Page 43
screen. 2. Select the desired freeway by touching the touch-screen button. If the same two streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination and - 2006 Toyota Sienna | Owners Manual - Page 44
latitude and the longitude. 3. When the input is finished, touch "OK". By touching the touch-screen button of the desired point, the screen changes and displays the map location of the selected destination and the route preference. (See "Starting route guidance" on page 43.) 2. Input a telephone - 2006 Toyota Sienna | Owners Manual - Page 45
DESTINATION SEARCH Starting route guidance After inputting the destination, the screen changes and displays the map location of the selected destination and the route preference. 2. Touch "Enter". The system starts route search and displays recommended routes. If there is already a set destination - 2006 Toyota Sienna | Owners Manual - Page 46
on page 66.) D If "Guide" is touched until a beep sounds, Demo mode will start. Push Guide". "3 Routes": To select the desired route from three possible routes. (See page 45.) "Route": To change the route. (See pages 53 and 55.) 1 CAUTION Be sure to obey traffic regulations and keep road conditions - 2006 Toyota Sienna | Owners Manual - Page 47
DESTINATION SEARCH D To change the route before starting guidance ROUTE PREFERENCE 3. After "OK". choosing conditions, touch 3 ROUTES SELECTION incorrect. Upon reception of GPS signals, it is automatically corrected. 1. You can change route preference by touching "Route Preference". 1. To - 2006 Toyota Sienna | Owners Manual - Page 48
DESTINATION SEARCH "Short": A route by which you can reach the destination in the shortest distance. This route is indicated by a green line. "Info.": To display the following information about each of the 3 routes. 1 2 3 4 5 Time necessary for the entire trip Distance of the entire trip Toll - 2006 Toyota Sienna | Owners Manual - Page 49
and time to destination ...Setting and deleting destination ...Adding destinations ...Reordering destinations ...Deleting destination ...Setting route ...Search condition ...Detour setting ...Route preference ...Starting route from adjacent road ...Map view ...Display POI icons ...Route overview - 2006 Toyota Sienna | Owners Manual - Page 50
ROUTE GUIDANCE Route guidance screen During route guidance, various types of guidance screens can be displayed depending on conditions. D Screen layout INFORMATION D If the vehicle goes off the guidance route, the route is searched again. D For some areas, the roads have not been completely - 2006 Toyota Sienna | Owners Manual - Page 51
ROUTE GUIDANCE : : : To scroll for farther junctions or exits. To scroll for closer junctions or exits. To scroll for the closest three junctions or exits. D When approaching a freeway entrance, exit or junction When the vehicle approaches an entrance, exit, or junction, the guidance screen for - 2006 Toyota Sienna | Owners Manual - Page 52
next street name Turn direction Distance to the next turn Current street name 1 2 3 4 "Proceed about 5 miles." "In a quarter of a mile, right turn." "Right turn." (Beep sound only) 50 - 2006 Toyota Sienna | Owners Manual - Page 53
circle." "In a quarter of a mile, traffic circle ahead, and then 3rd exit ahead." "The 3rd exit ahead." "The exit ahead." (Beep sound only) ∗: 2 The system indicates a U-turn if the distance between two one-way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 - 2006 Toyota Sienna | Owners Manual - Page 54
guidance command, push the "MAP/VOICE" button to hear it again. D To adjust the voice guidance volume, see "Volume" on page 67. The system announces the approach to the final destination. 1 2 Distance and time to destination "Your destination is ahead." "You have arrived at your destination. The - 2006 Toyota Sienna | Owners Manual - Page 55
ROUTE GUIDANCE To switch to estimated travel time. Setting and deleting destination - - Adding destinations Adding destinations and searching again for the routes can be done. Displayed while driving off the guidance route. The destination direction is indicated by an arrow. INFORMATION 2. Touch - 2006 Toyota Sienna | Owners Manual - Page 56
Reordering destinations When more than one destination is set, you can change the arrival order of the destinations. 4. Touch the desired "Add previously input number. 4. After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. - 2006 Toyota Sienna | Owners Manual - Page 57
set destination can be deleted. Setting route - - Search condition You can designate the route conditions of the route to the destination. 1. Touch "Route". touch "OK" after deleting the destinations. The system searches for the guidance route again, and displays the entire route. 1. Touch " - 2006 Toyota Sienna | Owners Manual - Page 58
route. "Whole Route": By touching this touchscreen button, the system will calculate an entire new route to the destination. The entire route from the starting point to the destination is displayed. "Guide": To start guidance. "Route": To change a route. (See pages 53 and 55.) 2. Touch "Detour - 2006 Toyota Sienna | Owners Manual - Page 59
, the detour distance selections are 5, 15, and 25 miles (km). D The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions. 2. Touch "Route Preference" to change the conditions which are to determine the route to the destination. 57 - 2006 Toyota Sienna | Owners Manual - Page 60
ROUTE GUIDANCE - Starting route from adjacent road You can start the route guidance from the adjacent road. (ex. When route guidance is set on the freeway, but the vehicle is driven parallel along the freeway.) Map view - - Display POI icons Points of Interest such as gas stations and restaurants - 2006 Toyota Sienna | Owners Manual - Page 61
searching for the nearest Point of Interest, touch this touchscreen button. The system will list the points within 20 miles (32 km). (See page screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI, see page 84.) Select the desired POI categories. The - 2006 Toyota Sienna | Owners Manual - Page 62
ROUTE GUIDANCE D To display the local POI list Points of Interest that are within 20 miles (32 km) of the current position will be listed from among the selected categories. Select the desired POI categories from the list. The selected category icon appears on the top left of the screen. By - 2006 Toyota Sienna | Owners Manual - Page 63
set as a destination. The map will shift so that the icon is centered on the screen and overlaps with the cursor . At this time, the distance route from the current position to the destination is displayed. "Guide": To start guidance. "Route": To change the route. (See pages 53 and 55.) "Turn List - 2006 Toyota Sienna | Owners Manual - Page 64
or . However, not all road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street name closest to the starting point will be displayed - 2006 Toyota Sienna | Owners Manual - Page 65
It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 mile (50 km). : To indicate the next destination. : To preview the route to the next - 2006 Toyota Sienna | Owners Manual - Page 66
ROUTE GUIDANCE 64 - 2006 Toyota Sienna | Owners Manual - Page 67
ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use IV 66 67 67 69 70 71 75 75 76 76 77 79 80 80 Suspending and resuming guidance ...Volume ...User selection ...My places ...Registering memory points ...Editing memory points ...Deleting memory points ... - 2006 Toyota Sienna | Owners Manual - Page 68
the current position map without route guidance. 2. Touch "Resume Guidance". 2. Touch "Suspend Guidance". INFORMATION Without route guidance, "Suspend Guidance" cannot be used. The screen will change to the current position map with route guidance. 66 - 2006 Toyota Sienna | Owners Manual - Page 69
even if the navigation screen is changed to other screens. "Adaptive Volume Control": By turning "Adaptive Volume Control" on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). To turn the "Adaptive Volume Control" system on, touch the button. The indicator - 2006 Toyota Sienna | Owners Manual - Page 70
that is already registered is touched, the following screen appears. 2. Touch "Select User". 1. Touch "Memorize". The confirmation screen will be displayed. To replace, touch "Yes". To cancel the re. placement, touch "No" or 2. To register, touch "Yes". To return to . the previous screen, touch - 2006 Toyota Sienna | Owners Manual - Page 71
ADVANCED FUNCTIONS D To change user D To delete user My places - Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. ( - 2006 Toyota Sienna | Owners Manual - Page 72
ADVANCED FUNCTIONS 8 9 10 Deletes previous points. (See " - Deleting previous points" on page 80.) Number of remaining memory points Number of remaining areas to avoid - Registering memory points On this screen, the following operations can be performed. 1 Registers memory points. (See " - - 2006 Toyota Sienna | Owners Manual - Page 73
ADVANCED FUNCTIONS - Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 3. Touch "OK". To edit registered information, see " - Editing memory points" on page 71. INFORMATION Up to 106 memory points can be registered. 1. - 2006 Toyota Sienna | Owners Manual - Page 74
Icon" on the "Memory Point" screen. SOUND ICONS When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch "with Sound" on the "Change Icon" screen. 2. Touch the desired icon. Turn the page by touching "Page 1", "Page 2" or "with Sound". Touch either or to adjust the - 2006 Toyota Sienna | Owners Manual - Page 75
1. Touch "Quick Access" on the "Memory Point" screen. 2. Touch the desired attribute. It is possible to replace a registered attribute. DELETING "Quick Access" 1. Touch "Del.". 3. To replace the attribute, touch "Yes". To return to the previous screen, touch "No" or . INFORMATION One "Home" and - 2006 Toyota Sienna | Owners Manual - Page 76
on the "Memory Point" screen. DISPLAYING MEMORY POINT NAMES The name of a memory point that may be displayed on the map can be set. D To change "Location" 1. Touch "Location" on the "Memory Point" screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 3. Touch "OK - 2006 Toyota Sienna | Owners Manual - Page 77
ADVANCED FUNCTIONS D To change "Phone #" (telephone number) 1. Touch "Phone #" on the "Memory Point" screen. - Deleting memory -screen button to be deleted. "Delete All": To delete all memory points in the system. 3. To delete the memory point, touch "Yes". To cancel the deletion, touch "No". 75 - 2006 Toyota Sienna | Owners Manual - Page 78
ADVANCED FUNCTIONS - Deleting home - Registering area to avoid Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. 2. Enter the location in the same way as for a destination search. (See "Destination search" on page 24.) When - 2006 Toyota Sienna | Owners Manual - Page 79
area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area size of a registered area can be edited. 3. Set the cursor in the center of the area to avoid, and touch "Enter". 1. Touch "Edit". 4. Touch either or to change the size - 2006 Toyota Sienna | Owners Manual - Page 80
ADVANCED FUNCTIONS D To change "Name" 1. Touch "Name" on the "Edit Area to Avoid" screen. be displayed on the map. (See page 78.) "Location": To edit area location. (See page 79.) "Area Size": To edit area size. (See page 79.) "Active": To turn on or off the area to avoid feature. To turn on the - 2006 Toyota Sienna | Owners Manual - Page 81
" on the "Edit Area to Avoid" screen. D To change "Area Size" 1. Touch "Area Size" on the "Edit Area to Avoid" screen. - Deleting area 3. Touch "Enter". The previous screen will be displayed. 2. Touch either or to change the size of the area to be avoided. 3. Touch "OK". The previous screen will be - 2006 Toyota Sienna | Owners Manual - Page 82
"No". 1. Touch "Delete Previous Points". 2. Touch "Setup". 2. Touch the touch-screen button you want to delete. "Delete All": To delete all previous points in the system. 80 - 2006 Toyota Sienna | Owners Manual - Page 83
ADVANCED FUNCTIONS D Distance unit Distance unit can be changed. 1. Touch "Setup" on the "Menu" screen. D Estimated 2. Touch "Set Speed" of the "Estimated Travel Time". INFORMATION This function is available only in English or Spanish. To switch language, see "Select language" on page 149. 81 - 2006 Toyota Sienna | Owners Manual - Page 84
greatly depending on progress along the route, which may be affected by road conditions such as traffic jams, and construction work. D It is possible to display up to 99 hours 59 minutes. D Input key layout Key layout can be changed. 1. Touch "Setup" on the "Menu" screen. 3. Touch or to set the - 2006 Toyota Sienna | Owners Manual - Page 85
ADVANCED FUNCTIONS LAYOUT TYPE D Time zone Time zone can be changed. 1. Touch "Setup" on the "Menu" screen. " "ABC" type 2. Touch "Change" of "Time Zone". The "Adjust Time Zone" screen will be displayed on the display. 3. Touch the desired time zone. The selected button is highlighted. "Daylight - 2006 Toyota Sienna | Owners Manual - Page 86
ADVANCED FUNCTIONS D Screen layout function ( Function) D POI category change (Display POI Icons) Select from among the 6 icons displayed on the " be displayed or hidden. 1. Touch "Setup" on the "Menu" screen. 2. Touch "Change" of " Function". 2. Touch "Change" of "Display POI Icons". 84 - 2006 Toyota Sienna | Owners Manual - Page 87
"Menu" screen. Then touch up" screen. 3. Touch the category button to be changed. to display page 2 of the "Set- D Notifying traffic restriction When the "Traffic Restrict. Notification" feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the "Traffic Restrict - 2006 Toyota Sienna | Owners Manual - Page 88
audio system. To turn the "Voice Guidance in All Modes" on: 1. Touch "Setup" on the "Menu" screen. Then touch up" screen. to display page 2 of the "Set- D Auto voice guidance When the "Auto Voice Guidance" feature is turned on, the voice guidance can be heard automatically. When the "Auto - 2006 Toyota Sienna | Owners Manual - Page 89
current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. Touch "Setup" on the "Menu" screen. Then touch twice to display page 3 of the "Setup" screen. This message appears when the system is in the POI mode and the - 2006 Toyota Sienna | Owners Manual - Page 90
is poor due to location, you can manually adjust the current vehicle position mark. 3. Touch the desired touch-screen button. INFORMATION For additional information on the accuracy of a current vehicle position, see "Limitations of the navigation system" on page 198. 1. Touch "Position/Direction - 2006 Toyota Sienna | Owners Manual - Page 91
, the current vehicle position mark may be incorrectly displayed. To perform a distance calibration procedure, touch "Tire Change" on the "Calibration" screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map screen will be displayed. 89 - 2006 Toyota Sienna | Owners Manual - Page 92
ADVANCED FUNCTIONS 90 - 2006 Toyota Sienna | Owners Manual - Page 93
information setting ...92 Dealer setting ...93 Calendar with memo ...95 Adding a memo ...96 Editing a memo ...98 Memo list ...98 Hands-free system ...99 Speech command system ...142 Help screen ...144 Screen adjustment ...145 Screen setting ...146 Beep setting ...149 Select language ...149 V 91 - 2006 Toyota Sienna | Owners Manual - Page 94
oil filter "ROTATION": Rotate tires "TIRES": Replace tires "BATTERY": Replace battery "BRAKE PAD": Replace brake linings "WIPERS": Replace wiper blades "LLC": Replace engine coolant "BRAKE OIL": Replace brake fluid "ATF": Replace ATF "SERVICE": Scheduled maintenance "AIR FILTER": Replace air filter - 2006 Toyota Sienna | Owners Manual - Page 95
information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. 4. Input the conditions. Notice of "Date": The next maintenance date - 2006 Toyota Sienna | Owners Manual - Page 96
OTHER FUNCTIONS D To edit "Dealer" or "Contact" 1. Touch "Dealer" or "Contact" on the "Edit Dealer" screen. D To edit "Location" 1. Touch "Location" on the "Edit Dealer" screen. 3. Touch the touch-screen button to be edited. "Dealer": To enter the name of a dealer. (See page 94.) "Contact": To - 2006 Toyota Sienna | Owners Manual - Page 97
enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 3.) Memos can also "OK". The previous screen will be displayed. or or : To change month. : To change year. V "Today": To display the current month calendar (if another - 2006 Toyota Sienna | Owners Manual - Page 98
add a memo. (See " - Adding a memo" on page 96.) "Mark f": To change the color of the mark displayed next to the date. To default the mark color, touch " date. - Adding a memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 3.) 1. - 2006 Toyota Sienna | Owners Manual - Page 99
OTHER FUNCTIONS 3. Touch "Memo". 4. Enter text using the keys. Up to 24 letters can be entered. After entering the text, touch "OK" at the bottom right of the screen. 5. When registering information on the memo, touch "Location". A screen similar to the destination search screen appears. Search - 2006 Toyota Sienna | Owners Manual - Page 100
" screen. - Memo list It is possible to display a memo list by setting a condition. 1. Touch "List" on the "Calendar" screen. 2. Touch the memo to be edited a memo. (See " - Adding a memo" on page 96.) "Location": To change a registered location. (See " - Adding a memo" on page 96.) "Enter ": - 2006 Toyota Sienna | Owners Manual - Page 101
wheel by connecting your cellular phone. This system supports Bluetooth. Bluetooth is a wireless data system by which you can call without your cellular phone being connected with a cable or connect the Bluetooth phone. V NOTICE Do not leave your cellular phone in the car. The temperature indoor may - 2006 Toyota Sienna | Owners Manual - Page 102
may not reach the other party. D Driving on unpaved road. (Making a traffic noise.) D Driving at the high speed. D The window is open. D Turning the air-conditioning vents towards the microphone. D The sound of the air-conditioning fan is loud. You can use the microphone above when talking on the - 2006 Toyota Sienna | Owners Manual - Page 103
cannot enter the Bluetooth phone, and take OPP service individually. An antenna for the Bluetooth connection is built in the display. The indication of the Bluetooth connection may turn yellow and the system may not function when you use the Bluetooth phone in the following conditions and places - 2006 Toyota Sienna | Owners Manual - Page 104
you release your car, initialize your data. If you initialize it, the former state will never come back again. Pay much attention when initializing the data. You can initialize the following data in the system. D Phone book data D Dialed numbers and received calls D Speed dial D Bluetooth phone data - 2006 Toyota Sienna | Owners Manual - Page 105
more between the radiator and person's body (excluding extremities: hands, wrists, feet and legs). Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. (a) Enter a Bluetooth phone To use the hands-free system, you need to enter your - 2006 Toyota Sienna | Owners Manual - Page 106
to the system. 7. When the connection is completed, this screen is displayed. You do not need to enter the phone in case of using the same one. When you register your phone, auto connection will be turned on. Always set it to this mode and leave the Bluetooth phone in a condition where connection - 2006 Toyota Sienna | Owners Manual - Page 107
switch is set at ACC or ON. D Reconnecting the Bluetooth phone If the Bluetooth phone is disconnected with a poor reception from the Bluetooth network when the ignition switch is set at ACC or ON, the system automatically reconnects the Bluetooth phone. In this case, the connection result is not - 2006 Toyota Sienna | Owners Manual - Page 108
After you enter the Bluetooth phone, you can call by using hands-free system. You can call using the 7 methods described below. (i) By dial You can call by inputting the telephone number. This cannot be operated while driving. (ii) By phone book You can call by phone book data which is transferred - 2006 Toyota Sienna | Owners Manual - Page 109
received calls You can call by received calls. When a call is received, the system memorize up to 5 numbers. If it is over than 5, the oldest number is deleted. This cannot be operated while driving. D When you call by phone book, the name (if registered) is displayed. D When you call the same - 2006 Toyota Sienna | Owners Manual - Page 110
is displayed on the left side of the number. D Unnoticed telephone number such as a public telephone is not memorized in the system. Touch or push the switch of the steering wheel. D A international phone call may not be made depending on the cellular phone which you have. 1. Touch "Speed Dial" to - 2006 Toyota Sienna | Owners Manual - Page 111
in the phone book. For setting the voice recognition, see "Setting the voice recognition" on page 126. Example: Call Charlize 2. Touch the desired number to call. You can change the page by command of voice recognition, see "Speech command system" on page 142 and "Help screen" on page 144.) V 109 - 2006 Toyota Sienna | Owners Manual - Page 112
the switch of the steering wheel. D Touch "Cancel". (Except for recognizing the command) D Say "Cancel" "Next" is displayed when multiple entries are found for a searched name. Up to 6 entries can be displayed including the first searched one. Do the following to change the entry to the next one - 2006 Toyota Sienna | Owners Manual - Page 113
a desired number. D Sending a tone You can send a tone by giving a desired number. (vii) By POI call You: System: Push the talk switch. "After the beep, please say the number." You: "812387" System: "When ready, please briefly push the talk switch or push the off-hook switch to dial." You: Push - 2006 Toyota Sienna | Owners Manual - Page 114
Bluetooth phone (d) Talk on the Bluetooth phone You cannot change from Hands-free call to cellular phone call while driving. When you change manual that comes with your cellular phone. When a call is received, this screen is disor push played with a sound. Touch the switch of the steering wheel - 2006 Toyota Sienna | Owners Manual - Page 115
OTHER FUNCTIONS You can do this operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number in the phone book. Touch the desired number to input the key. To hang up the phone: or push the - 2006 Toyota Sienna | Owners Manual - Page 116
tone. (For registering the speed tone, see "Registering the speed tone" on page 117.) (e) Change the settings of the Bluetooth phone (i) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be - 2006 Toyota Sienna | Owners Manual - Page 117
OTHER FUNCTIONS 2. Touch "Register" of "Speed Dial". 4. Touch the desired telephone number. 6. If you select a touch-screen button you registered before, this screen is displayed. Touch "YES" if you want to overwrite it. V 3. Select the data you want to register. 5. Touch the touch-screen - 2006 Toyota Sienna | Owners Manual - Page 118
OTHER FUNCTIONS D Deleting the speed dial individually You can delete "01" - "17" of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. D Deleting all of the speed dial 2. Touch the touch-screen button you want to delete. 1. Touch "Delete All" of "Speed - 2006 Toyota Sienna | Owners Manual - Page 119
OTHER FUNCTIONS (ii) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 3. Input the number and touch "OK". 5. If you select a touch-screen button you register before, this screen is displayed. Touch "YES" if you want to overwrite it - 2006 Toyota Sienna | Owners Manual - Page 120
OTHER FUNCTIONS D Editing the speed tone. You can edit the speed tone. 3. Use the software keyboard to input the name. 1. Touch "Edit" of "Speed Tone". 5. Touch "YES". 4. Input the number and touch "OK". 2. Touch the touch-screen button you want to edit. 118 - 2006 Toyota Sienna | Owners Manual - Page 121
OTHER FUNCTIONS D Deleting the speed tone individually. You can delete "1" to "6" of the speed tone. If you delete them all at once, all of 6 numbers are deleted. D Deleting all the speed tone 3. Touch "YES". 1. Touch "Delete All" of "Speed Tone". 1. Touch "Delete" of "Speed Tone". V 2. Touch - 2006 Toyota Sienna | Owners Manual - Page 122
OTHER FUNCTIONS (iii) Setting the volume D Automatic volume settings for high speed You can set the volume one step up when the speed is over 80 km/h. (When it is under 70 - 2006 Toyota Sienna | Owners Manual - Page 123
OTHER FUNCTIONS (iv) Setting the screen D Receiving Call Display You can select the method of the receiving call display. D Auto answer When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any switch) after the - 2006 Toyota Sienna | Owners Manual - Page 124
ignition switch is set at ACC or ON and the Bluetooth is automatically connected, the connection check is displayed. Touch "Default". Touch "Phone Book" to display the "Phone Book Management" screen. Touch "YES". Touch "On" or "Off" of "Show Bluetooth connection status at start up". You can do the - 2006 Toyota Sienna | Owners Manual - Page 125
's data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. 2. Select the group you want to transfer to. 4. Transfer the phone book data to the system using the Bluetooth phone. This screen appears while transferring. To cancel it, touch "Cancel - 2006 Toyota Sienna | Owners Manual - Page 126
FUNCTIONS D Registering the phone book data You can register the phone book data. When this screen is displayed, try the transfer operation again. 1. Touch "Register" of "Phone Book". 3. When you complete the edit, touch "OK". 2. Touch the desired touch-screen button to edit the phone book. 124 - 2006 Toyota Sienna | Owners Manual - Page 127
OTHER FUNCTIONS D Editing the name When you don't input the name, the number is displayed. D Editing the phone number You can register the phone number in "TEL1" and "TEL 2" separately. Up to 2 numbers a person can be registered. 3. Select the desired icon. 1. Touch "Name". 1. Touch "TEL 1" or " - 2006 Toyota Sienna | Owners Manual - Page 128
OTHER FUNCTIONS D Selecting the group You can set a group for a contact (for example: "Family", "Friends", "Office"...). It will then be easier for you to find this contact when needed, by using the group display. You can select "No group" or "Group 01" to "Group 19". "No group" is displayed if you - 2006 Toyota Sienna | Owners Manual - Page 129
OTHER FUNCTIONS D Adding the data to the phone book You can add data to the phone book. 3. Touch "PLAY" to play the voicetag. If you want to delete it, touch "Delete" and "OK". 3. Confirm the added data on the screen and touch " - 2006 Toyota Sienna | Owners Manual - Page 130
D Deleting the data You can delete the data. When you release your car, delete all your data on the system. 1. Touch "Edit". 3. Touch the desired touch-screen button. When you edit the data, touch "OK". 1. Touch "Delete" of "Phone Book". 2. Select the data you want to edit. When you also touch - 2006 Toyota Sienna | Owners Manual - Page 131
OTHER FUNCTIONS 3. Touch "YES". You can also delete it in the following way. 2. Select the desired data. 4. Touch "YES". V 3. Touch "Delete". 1. Touch "Phone Book". 129 - 2006 Toyota Sienna | Owners Manual - Page 132
Select Group" screen is displayed. You can also delete it in the following way. 1. Touch "Delete All" of "Phone book". 4. Select the desired group. 1. Touch "Phone Book". 2. Select the deleting method. Group Data ...Deleting all the phone data in group. All Contact Data ...Deleting all the phone - 2006 Toyota Sienna | Owners Manual - Page 133
OTHER FUNCTIONS D Registering a group name You can register 20 groups. "No Group", "Group 01" - "Group 19" is registered by default. You can change "Group 01" - "Group 19" into desired names. 3. Touch "YES". 2. Select the group you want to register. 1. Touch "Register" of "Group Name". V 3. - 2006 Toyota Sienna | Owners Manual - Page 134
OTHER FUNCTIONS D Selecting a group icon D Editing a group name D Deleting a group name You can delete the group names individually or all at once. If you delete a group name, that group will return to the default setting. (excluding "No Group") 1. Touch "Icon". 1. Touch "Name". 1. Touch " - 2006 Toyota Sienna | Owners Manual - Page 135
all the group name D Deleting the log data You can delete the log data individually or all at once. When you release your car, delete all the data on the system. (a) Individually 2. Select the group you want to delete the name of. 1. Touch "Delete All" of "Group Name". V 1. Touch "Delete" on the - 2006 Toyota Sienna | Owners Manual - Page 136
is "0000". Change a new code that is hard for other people to know. When you change the security code, don't forget the code. The dealers cannot unlock the security when you forget it. 1. Touch "Delete All" on the "Outgoing Call" or "Incoming Call" screen. 1. Touch "Phone Book Lock". 2. Touch - 2006 Toyota Sienna | Owners Manual - Page 137
OTHER FUNCTIONS 2. Touch "Change". 4. Touch "YES". D Phone Book Lock When you set the phone book lock, you can have the following functions locked. D Display of the phone book screen and transferring, registering, editing, deleting the phone book data. D Display of speed dial screen, registering, - 2006 Toyota Sienna | Owners Manual - Page 138
OTHER FUNCTIONS D Initializing the security code You can initialize the settings. 1. Touch "On". 1. Touch "Default". 3. Touch "YES". 2. Input the security code and touch "OK". 2. Input the security code and touch "OK". 136 - 2006 Toyota Sienna | Owners Manual - Page 139
is displayed when you have not registered a Bluetooth phone yet. Bluetooth mark is displayed when you choose the phone. 3. Touch "OK". 1. Touch "Settings" to display "Settings" screen. Although you can register up to 6 Bluetooth phones in the system, only one Bluetooth phone can function at a time - 2006 Toyota Sienna | Owners Manual - Page 140
set the information of the Bluetooth phone on the system. Device Name ...The name of Bluetooth phone which is displayed on the screen. You can change it into a desired name. Bluetooth Device Address ...The address peculiar to the system. You cannot change it. 2. Touch "Change". Touch "YES" or "NO - 2006 Toyota Sienna | Owners Manual - Page 141
...The password when you register your cellular phone in the system. You can change it into the figure of 4-8 digits. Bluetooth Device Address ...The address peculiar to the system. You can not change it. If you have registered two Bluetooth phones with the same Device Name or Passkey and you - 2006 Toyota Sienna | Owners Manual - Page 142
OTHER FUNCTIONS D Initializing the Bluetooth settings. You can initialize the settings. 3. Use the software keyboard to input the Device Name. You can input up to 20 characters. 5. When you complete - 2006 Toyota Sienna | Owners Manual - Page 143
you can make sure whether the telephone you delete is correct or not. 1. Touch "Delete" of "Bluetooth Telephone". 3. Touch "YES". When you delete the telephone while another Bluetooth phone is connecting, this message is displayed. 1. Select the telephone you want to display the information about - 2006 Toyota Sienna | Owners Manual - Page 144
command switch and try again. If no command is given, a beep sounds and the indicator disappears 6 seconds later. If the system does not recognize your speech, the system will respond with this message ("System does not recognize this command, please rephrase your command."). Start the operation - 2006 Toyota Sienna | Owners Manual - Page 145
, you will hear "Home is not registered". 4. Touch "Enter" or say "Enter destination", and the system starts searching for a route to your home. (If the destination is already registered, "Add" or "Replace" is displayed on the screen.) Touch or say "Cancel", and the search will be canceled. When you - 2006 Toyota Sienna | Owners Manual - Page 146
a function which displays the voice recognition help screen. You can see the command list and operating guide on it. (a) Command List (b) Operating Guide INFORMATION In the following conditions, the system may not recognize the command properly. D The command is not correct or clear. D There are - 2006 Toyota Sienna | Owners Manual - Page 147
screen for 20 seconds the "Display" screen goes off. Color and tone adjustment (with rear seat entertainment system) You can adjust the color and the tone while the DVD video and video CD are being played. "Color" "R": Strengthens the red color of the screen. "Color" "G": Strengthens the green color - 2006 Toyota Sienna | Owners Manual - Page 148
"Display" screen goes off. Depending on the position of the headlight switch, the screen changes to either day mode or night mode. To display the screen in the day mode even switch turned on, this condition is memorized in the system even with the engine turned off. 2. Touch "Screen Setting". 146 - 2006 Toyota Sienna | Owners Manual - Page 149
seat entertainment system can be locked to prevent rear passengers from operating the entertainment system. Select "ON" or "OFF" and then touch "OK". "ON": The navigation screen automatically returns from the audio screen 20 seconds after the end of audio operation. "OFF": The audio screen remains - 2006 Toyota Sienna | Owners Manual - Page 150
: D Maintenance conditions D Maintenance information "off" setting D Memory points D Areas to avoid D Previous points D Route trace D User selection settings D Phone book data D Dialed numbers and received calls D Speed dial D Bluetooth phone data D Security code This function is available only when - 2006 Toyota Sienna | Owners Manual - Page 151
The language of the touch-screen buttons, pop-up messages and the voice guidance can be changed. 1. Push the "INFO" button. Touch "Beep Off". "Beep Off" is highlighted. To set the beep sound on, touch "Beep Off" again. 2. Touch "Language". 3. Touch "English", "Français" or "Español" to select - 2006 Toyota Sienna | Owners Manual - Page 152
OTHER FUNCTIONS 150 - 2006 Toyota Sienna | Owners Manual - Page 153
AUDIO/VIDEO SYSTEM SECTION AUDIO/VIDEO SYSTEM Audio/video system VI Quick reference ...152 Using your audio/video system ...153 Audio/video system operating hints ...189 VI 151 - 2006 Toyota Sienna | Owners Manual - Page 154
AUDIO/VIDEO SYSTEM Quick reference 1 2 3 4 5 6 Function menu display screen To control the radio, CD changer or DVD player, touch the touch- pages 154 and 157. "DISC·AUX" button Push this button to turn the CD changer, DVD player and AUX on. For details, see pages 154, 157, 163 and 171. - 2006 Toyota Sienna | Owners Manual - Page 155
is set at ACC or ON. NOTICE To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. (a) Turning the system on and off "PWR·VOL": Push this knob to turn the audio system on and off. Turn this knob to adjust the volume - 2006 Toyota Sienna | Owners Manual - Page 156
-screen buttons for radio, CD changer and DVD player operation are displayed on the function touch-screen button display screen when the audio control mode is selected. Touch them lightly and directly on the screen. The selected switch is highlighted. INFORMATION D If the system does not respond to - 2006 Toyota Sienna | Owners Manual - Page 157
touch "OK". The surround function will turn on. Automatic sound levelizer (ASL): When the audio sound becomes difficult to be heard due to road noise, wind noise or other noises while driving, the system adjusts to the optimum volume according to the noise level. Select "ON" of "ASL" and touch "OK - 2006 Toyota Sienna | Owners Manual - Page 158
AUDIO/VIDEO SYSTEM (d) Selecting screen size (with rear seat entertainment system) (e) Your CD changer When you insert a disc, touch "LOAD" and gently push the disc in with the label side up. This CD changer can store up to four discs. The changer will play from track 1 through to the end of the - 2006 Toyota Sienna | Owners Manual - Page 159
system) The sound of the rear seat entertainment system can be enjoyed by pushing the "DISC·AUX" button. (g) AUX adapter The sound of portable audio players connected to the AUX adapter can be enjoyed. Push the "DISC·AUX" button to switch to AUX mode. For details, refer to the "Owner's Manual - 2006 Toyota Sienna | Owners Manual - Page 160
change the preset station to a different one, follow the same procedure. The preset station memory is cancelled when the power source is interrupted by battery disconnection or a blown fuse will be searched automatically one after another. System Your audio system is equipped with Radio Data Systems - 2006 Toyota Sienna | Owners Manual - Page 161
) D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R & B (Rhythm and Blues) D RELIGION D ALARM (Emergency message) "TYPE SEEK" When a program is set, "TYPE SEEK" appears. Touch the switch and the system starts to seek the station in the relevant program type. If any type program - 2006 Toyota Sienna | Owners Manual - Page 162
AUDIO/VIDEO SYSTEM - CD changer operation (e) Traffic announcement "TRAF" A station that regularly broadcasts traffic information is automatically located. When you touch "TRAF", "TRAF SEEK" appears on the display and the radio will start seeking any traffic program station. If no traffic program - 2006 Toyota Sienna | Owners Manual - Page 163
display. The changer will automatically start playing from the last disc you inserted. If the label faces down, the disc cannot be played. In this case, "CD CHECK" appears on the screen. NOTICE D Do not obstruct the display while it is moving. It could damage your audio system. D Do not insert one - 2006 Toyota Sienna | Owners Manual - Page 164
AUDIO/VIDEO SYSTEM The display opens and the amber indicators at either side of the slot start blinking. After the disc is ejected, the amber indicators change to green change to green. A disc can be inserted. The numbers of the trays where the disc is not set are dimmed. 2. Touch "All CD - 2006 Toyota Sienna | Owners Manual - Page 165
Vehicles with rear entertainment system - If the DVD player is turned on, push the "DISC·AUX" button again to switch to the CD changer. If the rear seat entertainment system is on, pushing the "DISC·AUX" button switches the sound of the front audio system and that of the rear seat entertainment - 2006 Toyota Sienna | Owners Manual - Page 166
AUDIO/VIDEO SYSTEM (e) Playing an audio disc Push the "AUDIO desired track can be selected from a list. This function is available only when the vehicle is not moving. Touch "TRACK LIST entertainment system - While the DVD player is in operation, the chapter or track can be changed by pushing either side - 2006 Toyota Sienna | Owners Manual - Page 167
AUDIO/VIDEO SYSTEM Fast forward: Push "Ɯ" side of the "SEEK/ TRACK" button and hold track, touch "SCAN" on the screen or push the "SCAN" button a second time. If the changer reaches the end of the disc, it will continue scanning at track 1. After all the tracks are scanned in one pass, normal play - 2006 Toyota Sienna | Owners Manual - Page 168
" appears on the screen. When the disc is finished, the changer will automatically go back to the beginning of the disc and play the disc again. To cancel screen. The system selects a track on all the audio discs in the changer in random order. To cancel it, touch "RAND" once again. If a CD-TEXT disc is - 2006 Toyota Sienna | Owners Manual - Page 169
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FOLDER "FOLDERY": Touch this touch-screen button to go to the next folder. "FOLDERB": Touch this touch-screen button to go to the previous folder. "FOLDER LIST": The desired folder can be selected in a list. This function is available only when the vehicle is - 2006 Toyota Sienna | Owners Manual - Page 170
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a be stepped up or down. "FILE": The desired file can be selected in a list. This function is available only when the vehicle is not moving. Touch "FILE". The file list is displayed. Touch the desired file - 2006 Toyota Sienna | Owners Manual - Page 171
AUDIO/VIDEO SYSTEM the "SCAN" button a second time. If the changer reaches the end of the folder, it will continue scanning from file 1. After all the one pass, normal play resumes. OTHER FUNCTIONS "RPT": Use it for automatic repeat of the file or folder you are currently listening to. Repeating - 2006 Toyota Sienna | Owners Manual - Page 172
it, touch "RAND" once again. When a file is skipped or the system is inoperative, touch "RAND" to reset. (g) If the player malfunctions If "CD ERROR" appears on the screen, audio signals of the disc cannot be read or the system has trouble. Push the "DISC" button once again. If the changer does not - 2006 Toyota Sienna | Owners Manual - Page 173
screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 189. (b) Ejecting a disc Push the button. (c) Playing a disc Push the "DISC·AUX" button if a disc is already loaded in the player. "DVD" appears on the screen. (If the CD changer is turned on, push the - 2006 Toyota Sienna | Owners Manual - Page 174
AUDIO/VIDEO SYSTEM (d) Operating an audio CD PLAYING AN AUDIO CD CD text only - The disc title and track title will appear on the screen when pushing the "DISC·AUX" button. Push the "AUDIO" button to display this screen. Touch the desired track number. The player function is available only when - 2006 Toyota Sienna | Owners Manual - Page 175
"RPT" once again. "RAND": Use it for automatic and random selection of the disc which you are currently listening to. When "RAND" is touched, the system selects a track in the disc you are currently listening to. To cancel it, touch "RAND" once again. If a CD-TEXT disc is inserted, the title of the - 2006 Toyota Sienna | Owners Manual - Page 176
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FOLDER (e) Operating a MP3 DISC PLAYING A MP3 DISC Push the "AUDIO beep sounds. "FOLDER LIST": The desired folder can be selected in a list. This function is available available only when the vehicle is not moving. Touch the desired folder number. The player - 2006 Toyota Sienna | Owners Manual - Page 177
AUDIO/VIDEO SYSTEM SELECTING A DESIRED FILE "SEEK/TRACK" button: Use for direct access to a desired file. Push either side of the "SEEK/TRACK" button and repeat it until the desired file number appears on the display. As you release the button, the player will start playing the selected file from - 2006 Toyota Sienna | Owners Manual - Page 178
AUDIO/VIDEO SYSTEM SEARCHING FOR A DESIRED FILE Touch "SCAN" on the screen or push the "SCAN" button briefly. "SCAN" appears on the screen. The DVD player the beep sounds while the folder is playing. "FLD.RPT" appears on the screen. When the folder is finished, the player will automatically go back - 2006 Toyota Sienna | Owners Manual - Page 179
. Be sure to read the instruction manual for the DVD video disc separately provided. For the detailed information about DVD video discs, see "(h) DVD player and DVD video disc information". Precautions on DVD video disc When recording with a DVD video or video CD, audio tracks may not record in some - 2006 Toyota Sienna | Owners Manual - Page 180
when you read the message. PLAYING A DVD DISC Push the "AUDIO" button to display this screen. When you touch "WIDE", the screen mode can be changed. It you touch "PICTURE" when the vehicle is completely stopped and the parking brake is applied, the video screen returns. DISPLAYING DVD CONTROLS If - 2006 Toyota Sienna | Owners Manual - Page 181
AUDIO/VIDEO SYSTEM the manual that audio changing screen appears. (See page 180.) "Subtitle": The subtitle changing screen appears. (See page 180.) "Angle": The angle selection screen appears. (See page 181.) SELECTING A MENU ITEM Enter the menu item using Y, ", B and A and touch "Enter". The player - 2006 Toyota Sienna | Owners Manual - Page 182
AUDIO/VIDEO SYSTEM SEARCHING BY TITLE Enter the title number and touch "Enter". The player starts playing video for that title stored in the discs and changed. When you touch returns. , the previous screen CHANGING THE AUDIO LANGUAGE Each time you touch "AUDIO", the language is selected from - 2006 Toyota Sienna | Owners Manual - Page 183
AUDIO/VIDEO SYSTEM CHANGING THE ANGLE The angle can be selected for discs that are multi-angle compatible when the angle mark appears on the screen. Each time you touch "Angle", the angle changes. When you touch screen returns. , and the previous SETUP MENU There are initial setting touch-screen - 2006 Toyota Sienna | Owners Manual - Page 184
AUDIO LANGUAGE CODE". To return to the "Setup Menu" screen, touch . the D Parental lock The level of viewer restrictions can be changed. 1. Touch "Parental Lock on the screen turns on or off alternately. If you touch "Others" on the "Select Audio Language" screen, "Select Subtitle Language" screen - 2006 Toyota Sienna | Owners Manual - Page 185
AUDIO/VIDEO SYSTEM 0920 0519 2608 1412 1620 1922 1821 1115 0512 0101 0102 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 Italian Spanish Chinese Dutch - 2006 Toyota Sienna | Owners Manual - Page 186
AUDIO/VIDEO SYSTEM 1121 1125 1201 1214 1215 1220 1222 1307 1309 1311 1312 1314 1315 1318 1319 1320 1325 1401 1405 1415 1503 Kurdish Kirghiz Latin Lingala - 2006 Toyota Sienna | Owners Manual - Page 187
normal play. Under the same condition, the rear passenger can cancel the setup operation from the front seat. To lock the operation of the player from the rear seat, see "(c) Rear system lock" on page 147. (g) Operating a video CD PLAYING A VIDEO CD Push the "AUDIO" button to display this screen - 2006 Toyota Sienna | Owners Manual - Page 188
AUDIO/VIDEO SYSTEM "Hide Buttons": Touching this will turn off the controls from the screen. If " " appears on the display when you touch a control, the operation is not permitted. DESCRIPTION OF VIDEO CD CONTROLS D Controls on top page "Select Number": The track or number search screen appears. ( - 2006 Toyota Sienna | Owners Manual - Page 189
also appear on the screen. For appropriate discs for this player, see "Audio/video system operating hints" on page 189. If "REGION CODE ERROR" player and allow the player to cool down. If the malfunction is not rectified: Take your vehicle to your dealer. If an MP3 disc contains CD-DA files, only CD - 2006 Toyota Sienna | Owners Manual - Page 190
technology in which the volume of data assigned to the picture is changed depending on the picture format has also been adopted. Audio data is stored using PCM and Dolby digital, which enables higher quality of sound. Furthermore, multi-angle and multi-language features will also help you enjoy - 2006 Toyota Sienna | Owners Manual - Page 191
audio system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio - it is just the normal result of conditions for two signals to reach your antenna at the same time. If this - 2006 Toyota Sienna | Owners Manual - Page 192
AUDIO/VIDEO SYSTEM the radio station to sound alternately strong and weak. Station air conditioning to cool the vehicle interior before you use the changer and player. D Bumpy roads or other vibrations may make your CD changer and DVD player skip. D If moisture gets into your CD changer and DVD player - 2006 Toyota Sienna | Owners Manual - Page 193
AUDIO/VIDEO SYSTEM Audio CDs DVD video discs Video CDs DVD player D Use only discs marked as shown above. The following products may not be playable on your player. SACD Copy-protected CD CD-ROM DVD-R DVD+R DVD-R W DVD+RW DVD-ROM DVD-RAM " Special shaped discs " Low quality discs VI " - 2006 Toyota Sienna | Owners Manual - Page 194
AUDIO/VIDEO SYSTEM NOTICE Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player hole, hold the disc up to the light.) D Remove discs from the players when you are not using them. Store - 2006 Toyota Sienna | Owners Manual - Page 195
Layer 3) and WMA (Windows Media Audio) are audio compression standards. D The MP3/WMA player can play MP3 and WMA files on CD-ROM, CD-R and CDRW discs. The unit can play disc recordings compatible with ISO 9660 level 1 and level 2 and with the Romeo and Joliet file system. D When naming an MP3 or - 2006 Toyota Sienna | Owners Manual - Page 196
other storage conditions. The unit may be unable to play some damaged discs. D If you insert a CD-RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD-R disc. D Recordings on CD-R/CD-RW cannot be played using the DDCD (Double Density CD) system. TERMS - 2006 Toyota Sienna | Owners Manual - Page 197
AUDIO/VIDEO SYSTEM ISO 9660 format- This is the international standard for the formatting of CD-ROM folders and files audio data to about 1/10 the size of that on conventional discs. WMA- WMA (Windows Media Audio) is an audio compression format developed by Microsoft. It compresses files into a size - 2006 Toyota Sienna | Owners Manual - Page 198
AUDIO/VIDEO SYSTEM 196 - 2006 Toyota Sienna | Owners Manual - Page 199
APPENDIX SECTION APPENDIX Appendix VII Limitations of the navigation system ...198 Map database information and updates ...200 VII 197 - 2006 Toyota Sienna | Owners Manual - Page 200
, map data, etc. However, the accurate position may not be shown depending on the satellite condition, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate current vehicle - 2006 Toyota Sienna | Owners Manual - Page 201
tires are worn. D After replacing a tire or tires. D When using tires that are smaller or larger than the factory specifications. D When the tire pressure in any of the four tires is not correct. INFORMATION If your vehicle cannot receive GPS signals, you can correct the current position manually - 2006 Toyota Sienna | Owners Manual - Page 202
tire pressure also affects the diameter of the tires so please make sure the tire pressure of all four tires is correct. Map database information and updates This system USED IN THE NAVIGATION SYSTEM. BY USING THE DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND CONDITIONS SET FORTH BELOW. OWNERSHIP - 2006 Toyota Sienna | Owners Manual - Page 203
in no event shall GDT or supplier of the navigation system using the DATABASE ("Supplier") be liable for any or incomplete information due to the passage of time, changing circumstances, and due to the nature of the traffic conditions; special events; traffic congestion; or travel time. - 2006 Toyota Sienna | Owners Manual - Page 204
03766, USA. END USER NOTICE PLEASE READ THIS NOTICE CAREFULLY BEFORE USING THIS NAVIGATION SYSTEM The Point Of Interest Data ("POI" Data) in the navigation system is in part provided by infoUSA Inc. ("infoUSA"). By using the POI Data, you accept and agree to all terms and conditions set forth below - 2006 Toyota Sienna | Owners Manual - Page 205
END USER LICENSE AGREEMENT Personal Use Only. You agree to use this information for solely personal, noncommercial purposes, and not for service information with any products, systems, or applications installed or , OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT - 2006 Toyota Sienna | Owners Manual - Page 206
, or endorsement by such companies of this product. END-USER TERMS The Map Data Disc ("Data") is provided copyright, and is subject to the following terms and conditions which are agreed to by you, on the for which you were licensed, and not for service bureau, time-sharing or other similar purposes. - 2006 Toyota Sienna | Owners Manual - Page 207
, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN - 2006 Toyota Sienna | Owners Manual - Page 208
with respect to such subject matter. Governing Law. The above terms and conditions shall be governed by the laws of the Illinois, without giving effect to from or in connection with the Data provided to you hereunder. Government End Users. If the Licensed Data is being acquired by or on behalf of - 2006 Toyota Sienna | Owners Manual - Page 209
at FAR 52.227-14(g)(2) (Alternate II), which shall be affixed to alternative rights in the Licensed Data. There are two types of areas available for route guidance. In one type of area, primarily around metropolitan centers, detailed route guidance is available are often changed. In some places, construction - 2006 Toyota Sienna | Owners Manual - Page 210
for information about the availability and pricing of an update. CAUTION D Do not place anything on the opened 2. Touch "MAP ". The display opens and the map disc is ejected. display, as such items may be thrown about and possibly injure people in the vehicle during sudden braking or in an accident - 2006 Toyota Sienna | Owners Manual - Page 211
APPENDIX INFORMATION Under extremely cold conditions, the display may react slowly or operation sound may become louder. D To confirm the database version and disc coverage area 1. Push the "MENU" button. To display the disc coverage area, touch "Covered Area". - 2006 Toyota Sienna | Owners Manual - Page 212
APPENDIX 210 - 2006 Toyota Sienna | Owners Manual - Page 213
, you can enter the street address or a major intersection close to it and the system will guide you there. The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in approaching a fork or intersection - 2006 Toyota Sienna | Owners Manual - Page 214
Touch this touch-screen button to register the current position or the cursor position as a memory point...10 6 "Route" Touch this touch-screen button to change the route...53, 55 7 "Map View" Touch this touch-screen button to browse information about guidance route, to set the Points of Interest to - 2006 Toyota Sienna | Owners Manual - Page 215
...vi, 24 14 Screen configuration touch-screen button Touch this touch-screen button to change the screen mode...13 8 "MENU" button Push this button to display the " destination...52 17 "GPS" mark (Global Positioning System) Whenever your vehicle is receiving signals from the GPS, this mark - 2006 Toyota Sienna | Owners Manual - Page 216
one of the many POIs (Points of Interest) that have already been stored in the system's database...31 3 "POI Category" A destination can be selected from the POI category... of the four categories of emergency service points that are already stored in the system's database can be selected...38 1 vi - 2006 Toyota Sienna | Owners Manual - Page 217
freeway (interstate) entrance or exit can be entered...41 10 "?" Function help for the "Destination" screen can be viewed on this screen...8 11 "Change" To change the search area, touch this touch-screen button...24 12 Quick access touch-screen buttons One of 5 preset destinations can be selected by - 2006 Toyota Sienna | Owners Manual - Page 218
area...200 6 "Select User" Up to 3 different settings for different users can be memorized...67 7 "Setup" Enables various settings for the navigation system...ix, 80 8 "My Places" Enables changes to "Memory points", "Home" and "Areas to avoid". Enables deletion of the previous point...69 1 viii - 2006 Toyota Sienna | Owners Manual - Page 219
units "km" or "miles" can be selected...81 2 "Estimated Travel Time" The system to display the travel time and the arrival time to the destination on the route guidance screen can be set...81 3 "Keyboard Layout" Key layout can be changed...82 4 "Time Zone" The desired time zone can be selected...83 - 2006 Toyota Sienna | Owners Manual - Page 220
Modes" Voice guidance can be set in all modes...86 11 "Auto Voice Guidance" Automatic voice guidance can be set...86 12 "Pop-up Message" Selection Adjustment of the current vehicle position mark can be done manually, or mis-calculation by changing tire will be adjusted...87 14 "Default" This touch- - 2006 Toyota Sienna | Owners Manual - Page 221
and have all the occupants follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble- free motoring. For important information about this manual and your Toyota, read the following pages carefully. When it comes to service, remember that your Toyota dealer knows - 2006 Toyota Sienna | Owners Manual - Page 222
or damage. The types of warnings, what they look like, and how they are used in this manual are explained as follows: Safety symbol CAUTION This is a injury to informed order to others. warning risk of damage to your vehicle and its equipment. ii 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 223
the vehicle, and every occupant of the vehicle should wear seat belts properly at all times. Children should always be secured in child restraint systems that are appropriate for their age and size. SRS (Supplemental Restraint System) airbags are, as their names imply, designed to work with, and be - 2006 Toyota Sienna | Owners Manual - Page 224
the accelerator pedal was depressed D Position of the transmission selector lever D Whether the driver and front passenger wore the seat belts or not D Driver's seat position D Front passenger's occupant classification D SRS airbag deployment data iv 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 225
the condition of the 4 wheels D Vehicle stability control system diagnostic data The information above is intended to be used for the purpose of improving vehicle safety performance. Unlike general data recorders, the EDR does not record sound data such as conversation between passengers. Toyota - 2006 Toyota Sienna | Owners Manual - Page 226
". D Battery posts, terminals and related accessories contain lead and lead compounds. Wash your hands after handling. Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water. vi 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 227
cruise control system, antilock brake system, traction control system, vehicle stability control system, SRS airbag system and seat belt pretensioner system, be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation. vii 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 228
left as they are, this may cause an accident such as fire. Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by the qualified service shop or by your Toyota dealer before you dispose of your vehicle. viii 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 229
oil: ILSAC multigrade engine oil is recommended. See page 467 for detailed information. Tire information: See pages 471 through 481. Tire inflation pressure: See page 501. Publication No. OM45443U Part No. 01999-45443 Printed in Japan 01- 0603- 00 C 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 230
vehicle in top running order is to maintain it properly from the moment you drive it off the showroom floor. The Toyota authorized Repair Manual is packed with literally everything you need to know to perform your own maintenance in virtually every area of your new vehicle. 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 231
re− placement, valve clearance adjustment and engine oil and filter replacement. Where to obtain the Repair Manual The repair manual for SIENNA may be pur− chased from any Toyota dealer or the Material Distribution Center. To purchase the repair manual, please contact your Toyota dealer or call the - 2006 Toyota Sienna | Owners Manual - Page 232
06 SIENNA_U (L/O 0603) WE REALLY CARE ABOUT YOU Ċ PLEASE BUCKLE UP Toyota has made a special effort to encourage use of seat belts. Toyota belts are: D Comfortable D Easy to use D Convenient We encourage you to use your belts every time you drive. U 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 233
06 SIENNA_U (L/O 0603) SECTION Overview of instruments and controls 1- 1 OPERATION OF INSTRUMENTS AND CONTROLS Instrument panel overview ...2 Instrument cluster overview ...5 Indicator symbols on the instrument panel ...7 1 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 234
14. Tire pressure warning system reset switch 15. Power sliding door main switch ("SLIDE DOOR OFF" switch) 16. Parking brake pedal 17. Window lock switch 18. Driving position memory buttons 19. Hood lock release lever 20. Power back door main switch ("BACK DOOR OFF" switch) 2 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 235
8. Air conditioning controls 9. "AIRBAG ON" and "AIRBAG OFF" indicator lights 10. Toyota park assist system switch and indicator light 11. Personal light main switch 12. Ignition switch 13. "TRAC OFF" switch 14. Cruise control switch or dynamic laser cruise control switch 3 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 236
mirror 2. Power back door switch 3. Front personal lights 4. Power sliding door switches 5. Electric moon roof switch 6. Microphone (See the separate "Navigation System Owner's Manual".) 1. Volume control switches for audio system/hands- free system (For the hands- free system, see the separate - 2006 Toyota Sienna | Owners Manual - Page 237
"Type A 1. Service reminder indicators and indicator lights 2. Speedometer 3. Engine coolant temperature gauge 4. Low fuel level warning light 5. Fuel gauge 6. Trip meter reset knob/instrument panel light control knob 7. Odometer and two trip meters 8. Tachometer 5 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 238
4. Low fuel level warning light 5. Fuel gauge 6. Dynamic laser cruise control master warning light 7. Dynamic laser cruise control display 8. Trip meter reset knob/instrument panel light control knob 9. Odometer and two trip meters 10. Tachometer 6 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 239
lock brake system warning light∗1 Driver's seat belt reminder light∗1 Front passenger's seat belt reminder light∗1 Charging system warning light∗1 Open door warning light∗1 SRS warning light∗1 Vehicle stability control system/traction control system warning light∗1 Low tire pressure warning light - 2006 Toyota Sienna | Owners Manual - Page 240
If this light flashes, see "Cruise control" on page 213 in Section 1- 7. If this light flashes, see "Dynamic laser cruise control" on page 216 in Section 1- 7. Headlight high beam indicator light ∗3 : Turn signal indicator lights Automatic transmission indicator lights 8 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 241
immobilizer system ...Wireless remote control ...Front doors ...Sliding doors ...Power sliding doors ...Back door ...Power back door ...Power windows ...Manual quarter windows ...Power quarter windows ...Hood ...Theft deterrent system ...Fuel tank cap ...Electric moon roof ... 9 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 242
system) Your vehicle is supplied with two kinds of keys. 1. Master keys-These keys work in every lock. 2. Sub key-This key will not work in the glove box. To protect items locked in the glove box when using valet parking, leave the sub key with the attendant. Since the front doors and sliding doors - 2006 Toyota Sienna | Owners Manual - Page 243
key with the attendant. Since the front doors and sliding doors can be locked without a key, you should always carry a spare master key in case you accidentally lock your keys inside the vehicle. NOTICE When them with your hand to start the engine. 11 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 244
dealer using the key number. We recommend writing down the key number and storing it in a safe place. z Do not bend the key grip. 12 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 245
when the theft deterrent system is setting or activating. (See "Theft deterrent system" on page 48 in this Section.) D The indicator light does not start flashing when the key is removed from the ignition switch. D The indicator light flashes inconsistently. 13 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 246
FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Type A Type B 14 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 247
06 SIENNA_U (L/O 0603) 1. Lock switch 2. Unlock switch 3. Alarm switch 4. Sliding door open switch (right side) 5. Back door open switch 6. Sliding door open switch (left side) The wireless remote control system is designed to lock or unlock all the side doors and back door, or activate the panic - 2006 Toyota Sienna | Owners Manual - Page 248
all the side doors and back door simultaneously. Each time the unlock switch is pushed, two beeps will be heard, turn signal lights will flash twice. Locking operation (type A) Locking operation (type B) Unlocking operation (type A) Unlocking operation (type B) 16 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 249
in this system. For details, contact your Toyota dealer. D Cancelling the wireless door locking or unlocking function D Cancelling the flash of the turn signal lights D Cancelling the beep sound Right side power sliding door (type A) Right side power sliding door (type B) 17 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 250
the switches under the following conditions only: D The sliding door is unlocked. D The power sliding door system is on. (The "SLIDE DOOR OFF" switch on the instrument panel is pushed out.) The sliding door operation by the wireless remote control can be changed or disabled. For details, contact - 2006 Toyota Sienna | Owners Manual - Page 251
or opening the back door, two beeps will be heard and the turn signal lights will flash twice. Closing operation can be performed by the switch under the following conditions only: Pushing and holding the alarm switch blows the horn intermittently and flashes the headlights, tail lights and turns on - 2006 Toyota Sienna | Owners Manual - Page 252
alarm function can be disabled. For details, contact your Toyota dealer. For replacement, use a CR2032 lithium battery batteries according to the local laws. Replace the transmitter battery by following these procedures: 1. Using a coin or equivalent, open the transmitter case. 20 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 253
the positive side and negative side of the transmitter battery are faced correctly. z Do not replace the battery with wet hands. Water may cause unexpected rust. z Do not touch or move any components inside the transmitter, or it may interfere with proper operation. 21 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 254
your Toyota dealer. LOCKING AND UNLOCKING INSIDE LOCK KNOB Move the lock knob. To lock: Push the knob forward. To unlock: Pull the knob backward. WITH The front doors can be opened by pulling the inside handles even if the lock knobs are in the locked position. 22 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 255
control transmitter when all the side doors and back door are closed. D Open the driver's door or front passenger's door and move the inside lock knobs of both front doors to the lock position, then close the front doors. Front passenger's side 23 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 256
children are in the vehicle. Along with the proper use of seat belts, locking the doors helps prevent the driver and passengers from being thrown out from the vehicle in an accident. It also helps prevent the doors from being opened unintentionally. 24 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 257
unlock: Move the knob backward. Closing the sliding door with the lock knob in the lock position will also lock the sliding door. Be careful not to lock your keys in the vehicle. WITH D Unlocking linked with the shift position All doors are automatically unlocked when the selector lever is moved to - 2006 Toyota Sienna | Owners Manual - Page 258
from the sliding door. Otherwise, the closing door may cause an unexpected serious injury. D When the vehicle is stopped on a slope, the door will slide faster when opening or closing, so be especially careful that the passengers do not get hit or pinched by the door. 26 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 259
whenever small children are in the vehicle. CAUTION Do not leave the sliding door at halfopened position because the door is not latched at this position. If the vehicle is stopped on a downward slope, it may move and cause an unexpected injury. 27 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 260
line on top of the switch indicates that the power sliding door system is on.) To disable the power sliding door feature, push in the switch. NOTICE When your vehicle goes through an automatic car wash, make sure the power sliding door system is off. On Off CAUTION D Do not leave small children - 2006 Toyota Sienna | Owners Manual - Page 261
06 SIENNA_U (L/O 0603) -Operation of power sliding door CAUTION Before driving, be sure that the doors are closed and locked, especially when small children are in the vehicle. Along with the proper use of seat belts, locking the doors helps prevent the passengers from being thrown out from the - 2006 Toyota Sienna | Owners Manual - Page 262
by the switches under the following conditions: D The sliding door is unlocked. D The power sliding door system is on. (The "SLIDE DOOR OFF" switch is pushed out.) D The sliding door is between the fullyCenter pillar closed position and half- opened position. 30 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 263
power sliding door system is off, the sliding door can be operated manually by the outside or inside handle. D The child- protector is unlocked. (switches on the center pillar only) Closing operation can be performed by the switches under the following conditions: D The power sliding door system - 2006 Toyota Sienna | Owners Manual - Page 264
fully closed, it is automatically closed completely even if the power sliding door system is off. Before operating the power sliding door, make sure there is nobody near the sliding door. Make sure the sliding door stops at the fully- opened position, and then allow the passengers to get in and - 2006 Toyota Sienna | Owners Manual - Page 265
after you reconnect, replace or recharge the battery. In any of these cases, close the sliding doors completely by hand to normalize the power sliding door system. If the power sliding door system does not operate properly after the above procedure, there may be a problem in the system. Contact your - 2006 Toyota Sienna | Owners Manual - Page 266
the sliding door will stop at halfopened position for safety reasons. Close the window and then operate the sliding door. NOTICE Avoid forcibly opening the left side sliding door fully when the fuel filler door is opened. Otherwise, the fuel filler door may be damaged. 34 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 267
open the sliding door by the inside door handle. We recommend using this feature whenever small children are in the vehicle. NOTICE When the power sliding door is ON- To prevent the battery from being discharged, do not leave the sliding door at half- opened position. 35 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 268
switch light" on page 179 in Section 1- 5.) If the back door opener does not operate, see "If you cannot operate back door opener" on page 440 in Section 4. If the battery is disconnected or run down, the back door will be automatically locked after you reconnect, replace or recharge the battery. Be - 2006 Toyota Sienna | Owners Manual - Page 269
orange line on top of the switch indicates that the power back door system is on.) To disable the power back door feature, push in the switch. NOTICE When your vehicle goes through an automatic car wash, make sure the power back door system is off. 37 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 270
canceled by the "BACK DOOR OFF" switch. When the system is canceled, see "-Manual operation" on page 41 in this Section. When closing or opening the back door automatically, two beeps will be heard and the turn signal lights will flash twice. The beep sound can be changed. For details, contact your - 2006 Toyota Sienna | Owners Manual - Page 271
back door system is on. (The "BACK DOOR OFF" pushed out.) switch is D The back door is between in the fullyopened position and half- opened position. The time of pushing the switches for operating the back door can be changed. For details, contact your Toyota dealer. 39 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 272
following: If the battery is disconnected or run down, the back door will be automatically locked and the power back door system may not work after you reconnect, replace or recharge the battery. In any of these cases, normalize the power back door system by following procedure. 1. Unlock the back - 2006 Toyota Sienna | Owners Manual - Page 273
switch light" on page 179 in Section 1- 5.) If the back door opener does not operate, see "If you cannot operate back door opener" on page 440 in Section 4. If the battery is disconnected or run down, the back door will be automatically locked after you reconnect, replace or recharge the battery. Be - 2006 Toyota Sienna | Owners Manual - Page 274
door windows and sliding door windows work for 43 seconds even after the ignition switch is turned off. It stops working when either front door is opened. NOTICE Do not apply excessive force when the back door closer is operating. Otherwise, the back door closer may be damaged. 42 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 275
(type B only): During automatic closing operation, the window stops and opens half way if something gets caught between the window and window frame. If the window receives a strong impact, this function may work even if nothing is caught. Type B (to open and close) 43 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 276
. Window lock switch CAUTION D Never try jamming any part of your body to activate the jam protection function intentionally, as it could result in a serious injury. D The jam protection function may not work if something gets caught just before the window is fully closed. 44 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 277
lock switch on the driver's door, the passengers' windows cannot be operated. The sliding door window cannot be operated when the sliding door other parts of the bodies of all occupants are lock switch to prevent them from making unexpected use of the switches. 45 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 278
Manual quarter windows Power quarter windows Key off operation: If both front doors are closed, they work for 43 seconds even after the ignition switch is turned off. They stop working when either front door window switches without supervision. 46 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 279
be involved in a serious accident. To open the hood: 1. Pull the hood lock release lever. The hood will spring up slightly. 2. In front of the vehicle and securely locked. Otherwise, the hood may open unexpectedly while driving and an accident may occur. 47 2006 SIENNA from March '06 Prod. - 2006 Toyota Sienna | Owners Manual - Page 280
theft, the system is designed to sound an alarm if any of the side doors, back door or hood is forcibly unlocked or opened or the battery terminal is disconnected and then reconnected when the vehicle is locked. The alarm blows the horn intermittently and flashes the headlights, tail lights and turn - 2006 Toyota Sienna | Owners Manual - Page 281
the vehicle. 3. Close and lock all the side doors, back door and hood. The indicator light will remain on when all the side doors, back door and hood are closed and locked. WHEN THE SYSTEM IS SET Activating the system The system will sound the alarm under the following conditions: D If any of the - 2006 Toyota Sienna | Owners Manual - Page 282
a long time, etc., when the battery is recharged or replaced, the system will give the alarm. If this happens, immediately unlock any of the side doors or the back door with the key or the wireless remote control transmitter, and the alarm will stop. 50 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 283
door when the left side sliding door is fully opened. Otherwise, the fuel filler door may be damaged. 1. To open the fuel filler door, pull the lever up. When refueling, turn off the engine. CAUTION 2. To remove the fuel tank cap, turn the cap counterclockwise by 90 degrees (to the pressure - 2006 Toyota Sienna | Owners Manual - Page 284
receptacle on the back side of the door. Sliding operation D Make sure the cap is replacement. It is designed to regulate fuel tank pressure. NOTICE To prevent damage to the cap, apply force only in the turning direction to the cap. Do not pull or pry it. Tilting operation 52 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 285
off. It stops working when either front door is opened. Jam protection function: D If something gets caught between the moon roof and frame during slide closing operation, the moon roof stops and the way up and then tilts down a little automatically. 53 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 286
sure that the moon roof opens and closes automatically. If the moon roof cannot be operated vehicle is moving, always keep the heads, hands and other parts of the bodies of all occupants away from the roof opening. Otherwise, they could be seriously . 54 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 287
1- 3 OPERATION OF INSTRUMENTS AND CONTROLS Seats ...56 Front seats ...56 Driving position memory system ...63 Rear seats ...65 Head restraints ...104 Armrests ...104 Seat heaters ...105 Seat belts ...106 SRS airbags ...118 Child restraint ...137 55 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 288
. Do not allow any passengers to sit on top of a folded- down seatback, or in the luggage compartment or cargo area. Persons not properly seated and/or not properly restrained by seat belts can be severely injured in the event of emergency braking or a collision. The SRS driver airbag deploys with - 2006 Toyota Sienna | Owners Manual - Page 289
Do not modify or replace the seats or upholstery of the seats with side airbags. Such change may prevent the side airbag system from activating correctly, disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury. 57 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 290
position with slight body pressure and release the lever. 2. SEAT HEIGHT ADJUSTING KNOB To change the seat height, turn the knob either way. 3. SEATBACK LEVER ANGLE ADJUSTING Lean forward and pull the lever up. Then lean back to the desired angle and release the lever. 58 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 291
the driver and the front passenger are sitting up straight and well back in the seats. If you are reclined, the lap belt may slide past your hips and apply seatback at that position. To change the amount of lumbar support, turn the knob either way. 59 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 292
your neck may contact the shoulder belt. In the event of a frontal collision, the more the seat is reclined, the greater the risk of death or personal injury. Press either side of the switch. The amount of lumbar support will change while the switch is pressed. 60 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 293
this might interfere with the seat movement. 2. SEATBACK SWITCH ANGLE ADJUSTING The front passenger's seat folded down using this lever. Move the control switch in the desired direction. Releasing the switch will stop the seatback at that position. 61 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 294
provide maximum protection in a frontal or rear collision when the driver and the front passenger are sitting up straight and well back in the seats. If you are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder - 2006 Toyota Sienna | Owners Manual - Page 295
seat, avoid putting heavy loads on the temporary table. This system can memorize the position of the driver's seat and outside . D Make sure the front passenger's seat is securely locked in sliding position when you set the seat as a temporary table. 63 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 296
be recalled under the following conditions: D The ignition key is in the "ON position and the automatic transmission selector lever is in the "P" position. D The key is not in the ignition switch and less than 30 seconds have passed since opening the driver's door. 64 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 297
is locked in position. D Take care not to select the wrong button, or the seat could strike the rear passenger or hit your body against the steering wheel. If this happens, you can stop the movement by pressing another driving position memory switch, or depressing the brake pedal. 65 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 298
seats 1. SEAT POSITION ADJUSTING LEVER Hold the center of the lever and pull it up. Then slide the seat to the desired position with slight body pressure and release the lever. 2. SEATBACK ANGLE angle and release the strap. Outer seat Center seat 66 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 299
seat, perform the following procedure. Fold down the seatback while pulling the seatback angle adjusting lever or strap and swing up the seat. After passengers are in, return the seat until it locks securely, and lift up the seat back by pulling the lever or strap. 67 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 300
) SEATS 1. Stow the second seat belt buckles as shown in the illustration. This prevents the buckles from sticking out when you tumble the second seats. NOTICE To prevent damage to the seat belt buckles, the buckles must be stowed before you fold the seatback. 68 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 301
to the lowest position. Hold the center of the lever and pull it up. Then slide the seat to the rear- most lock position. 2. 7- passenger models only: Pull the armrests up. CAUTION The seat belt must be removed from the hanger when the seat belt is in use. 69 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 302
strap. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. D Do not sit on the third seats when the second seat is tumbled in avoid serious injury, do not sit on the folded seatback. 70 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 303
down the seatback from its upright position, the rear leg locks will disengage. In this case, lift up the seat and fold down again to engage the rear leg locks. NOTICE To prevent damage to the seat, avoid putting heavy loads on the temporary table. 71 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 304
to pull up the edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. D Make sure the seat belts are not twisted or caught in the seatback and are arranged in their proper position and are ready to use. 72 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 305
seatback while pulling the seatback angle adjusting strap. 3. Pull the seat lock release lever (red) and swing up the seat. If the front lock position, the rear leg will not unlock. In this case, slide the seat to the rear- most lock position and then do the above operation again. 73 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 306
do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. D Do not sit on the third seats when the second second seat is securely locked in position when you set the second seat as a temporary table. 74 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 307
D Make sure the seat is securely locked by pushing forward and rearward on the belt buckles, the buckles must be stowed before you fold the seatback. D Make sure the seat belts are not twisted or caught in the seatback and are arranged in their proper position and are ready to use. 75 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 308
to the lowest position. Hold the center of the lever and pull it up. Then slide the seat to the rear- most lock position. 2. 7- passenger models only: Pull the armrests up. CAUTION The seat belt must be removed from the hanger when the seat belt is in use. 76 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 309
release strap and fold down the seat. Then the front leg locks will disengage and you can remove the seat. z Avoid putting position adjusting lever. Otherwise, the seat may slide and not installed properly. If you slide the removed seat, return the seat to 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 310
on the side of the seat for additional installation instructions. NOTICE You must install the seat in its original position. If it is installed in the wrong position, the seat lock or bezel will be damaged. 7- passenger models 8- passenger models 78 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 311
front leg is locked securely, fold down the seat and engage the rear leg lock. You can easily align the front leg slide the seat forward along the groove of the bezel until the front legs will reach the striker. Make sure the front legs align with the striker, swing up the seat. 79 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 312
you align the legs with the front strikers, the bezel in the floor will be damaged. If you lock the rear legs before the front legs are locked securely, disengage the rear leg lock by pushing the red pin inside each rear leg. Then reinstall the seat following the correct procedure. 80 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 313
Otherwise, the seat may slide and not be installed properly. If you slide the removed seat, locked by pushing forward and rearward on the top of the seatback or by trying to pull up the edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. 81 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 314
moved to the inside when the console box is not installed between the second seats. REMOVING CENTER SECOND SEAT 1. Lower the head restraint to the lowest position. Hold the center of the lever and pull it up. Then slide the seat to the rear- most lock position. 82 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 315
the rear leg release lever (red) and swing up the seat. If the seat is not in the rear- most lock position, the rear leg will not unlock. In this case, slide the seat to the rear- most lock position and then do the above operation again. 83 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 316
. 4. Pull and hold the front leg release strap and fold down the seat. Then the front leg locks will disengage and you can remove the seat. To prevent personal injury in a collision or sudden stop: to sit on or place anything on the removed seat. 84 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 317
floor. The second center seat has a instructions. 1. Align the front leg hooks with the rear strikers in the floor. Then swing up the seat. NOTICE You must install the seat in its original position. If it is installed in the wrong position, the seat lock or bezel will be damaged. 85 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 318
the striker, swing up the seat. NOTICE When installing the seat, make sure to align the front leg hooks with the rearmost strikers of each pair in the floor. If you align the legs with the front strikers, the bezel in the floor will be damaged. 86 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 319
position, install according to the following procedure. If you lock the rear legs before the front legs are not lock securely, disengage the rear leg lock by pulling the rear leg release lever. Then reinstall the seat following the correct procedure. 87 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 320
seat from the normal position. (For details, see "-Removing second seat (center seat)" on page 82 in this Section.) Align the front leg hook with the rear striker of the forward pair. Then swing the seat until it reaches the folded seat side table. 88 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 321
collision or sudden stop: D Make sure the seat is securely locked by pushing forward and rearward on the top of the seatback or by trying to pull up the edge of the bottom cushion. Failure to do so will prevent the seat belt from operating properly. 89 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 322
seat is securely locked in the proper position. D Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the passengers are sitting up straight and well back in the seats. If you are reclined, the lap belt may slide past your - 2006 Toyota Sienna | Owners Manual - Page 323
third seats (manual seat) Before stowing the third seats: D Stow the seat belt buckles and center seat belt. (See "-Stowing seat belt buckles of the second and third seats" on page 111 and "-Stowing the center seat belt of the third seats" on page 112 in this Section.) D Align both seatbacks at - 2006 Toyota Sienna | Owners Manual - Page 324
. If the seat does not lift up when the seat lock release strap ("TO STOW/USE" printed on its surface) is pulled, reset as following procedure. Lift the seatback by pulling on the seatback angle adjusting on its surface), then fold down the seatback. 92 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 325
06 SIENNA_U (L/O 0603) 3. Push the seat against the floor and make sure it is locked securely. 93 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 326
locks. Make sure the front legs are locked securely. If the seat does not lift up when the seat lock release strap ("TO STOW/USE" printed on its surface) is pulled, reset as following procedure. injury in the event of emergency braking or collision. 94 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 327
folded down automatically by operating the folding/returning switch that is inside the back door opening on the belt buckles and center seat belt. (See "-Stowing seat belt buckles of the second and third seats" on page 111 and "-Stowing the center seat belt 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 328
) 4. SEATBACK ADJUSTING SWITCH The seatback will be returned by pushing this switch. The seatback will be adjusted. (See "Adjusting third seats" on page 91) 96 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 329
and a beep sounds for about 10 seconds. Remove the object before operating the seat again. If the indicator light above the switches flashes even though there is no object between the seatback and seat cushion, contact your Toyota dealer. Operation from outside 97 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 330
belts are not twisted or caught in the seatback. It could result in serious injuries in a sudden braking or a collision. Do not shift the automatic Open the back door when the ignition key is in "LOCK" or "ACC" and/or the automatic transmission selector lever is in "P". 98 2006 SIENNA from March ' - 2006 Toyota Sienna | Owners Manual - Page 331
is inside the back door opening on the outer edge of the ceiling. Before stowing the third seats: D Stow the seat belt buckles and center seat belt. (See "-Stowing seat belt buckles of the second and during the operation, seat operation will stop. 99 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 332
stowing switch. A beep sounds twice to indicate the start of the operation. The beep sounds again twice when the operation is completed. If the indicator light above the switches flashes while the stowing switch is being pushed, the stowing operation will not start. 100 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 333
back door when the ignition key is in "LOCK" or "ACC" and/or the automatic transmission selector lever is in "P". 2. Push and hold the stowing switch. To operation stops, the indicator light above the switches comes on and a beep sounds for about 10 seconds if any of the following condition occur - 2006 Toyota Sienna | Owners Manual - Page 334
back door when the ignition key is in "LOCK" or "ACC" and/or the automatic transmission selector lever is in "P". 2. Push and hold the returning switch. To operation stops, the indicator light above the switches comes on and a beep sounds for about 10 seconds if any of the following condition occur - 2006 Toyota Sienna | Owners Manual - Page 335
the seat again. If the indicator light above the switches flashes even though there is no object between belts are not twisted or caught in the seatback. It could result in serious injuries in a sudden braking or a collision. Do not shift the automatic 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 336
recommended. Front and second seats Armrests CAUTION D Adjust the center of the head restraint so that it is closest to locked in position. NOTICE To prevent damage to the armrest, avoid putting heavy loads on it. D Do not drive with the head restraints removed. Third seats 104 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 337
damage the heater and seat surface. z To prevent the battery from being discharged, turn the switch off when the engine is not running. D Babies, small children, elderly persons, sick persons , or other insulating objects which cover the seat. 105 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 338
are reclined, the lap belt may slide past your hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt. In the event of a frontal collision, the more the seat is reclined, the greater the risk of death or personal injury. 106 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 339
seat or doors. Tab D Inspect the belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts should be replaced. Do not disassemble or modify the system. When a passenger's shoulder belt is completely extended and is then retracted even slightly, the belt is locked in that - 2006 Toyota Sienna | Owners Manual - Page 340
fit by pulling the portion upward through the latch CAUTION Always wear the belt with the shoulder portion over the outside armrest and the lap portion under the outside armrest. Failure to do so may increase the chance of injury in an accident. 108 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 341
make sure the anchor is locked in position. To release the belt, press the buckle release button and allow the belt to retract. If the belt does not retract smoothly, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts. 109 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 342
. Two buckles and tabs for center seat belt of the third seats The two tabs have different shapes to prevent the belt from being buckled in the wrong place. Buckle 1-Matches the tab with the hooked end Buckle 2-Matches the tab with the concave end 110 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 343
to retract. Second (7- passenger models) CAUTION Do not use the center seat belt of the third seats with either buckle released. Fastening only the shoulder belt or lap belt may cause serious personal injury in case of a sudden braking or a collision. Third 111 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 344
from the cover. If the seat belt cannot be pulled out of the retractor, firmly pull the belt and release it. You will then be able to smoothly pull the belt out of the retractor. NOTICE Stow the center seat belt of the third seats when not in use. 112 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 345
belt restraint system in case of an accident, increasing the chance of personal injury. D Remember that the extender provided for you may not be safe when used on a different vehicle, for another person, or at a different seating position than the one originally intended. 113 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 346
with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of collision. D Be sure to wear the seat belt with- 114 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 347
properly latching the tab and buckle. D If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from injury. 115 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 348
these instructions may prevent the seat belt pretensioners from activating correctly, cause sudden operation of the system or disable the system, which could result in death or serious injury. Consult your Toyota dealer about any repair and modification. 6. Airbag sensor assembly 116 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 349
seat belt buckle switch, front passenger occupant classification system, "AIRBAG ON" indicator light, "AIRBAG OFF" indicator light, front passenger's seat belt buckle switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. (For details, see "Service reminder - 2006 Toyota Sienna | Owners Manual - Page 350
the driver seat's position sensor etc. The front passenger's airbag system consists of the front passenger occupant classification sensor etc. D Either seat belt pretensioner assembly or surrounding area is scratched, cracked, or otherwise damaged. 118 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 351
the primary protection of the driver and front passenger seat belt systems. The driver and front passenger can be killed or seriously injured by the inflating airbags if they do not wear the available seat belts properly. During sudden braking just before a collision, an unrestrained driver or front - 2006 Toyota Sienna | Owners Manual - Page 352
SRS warning light 3. Airbag module for front passenger (airbag and inflator) 4. "AIRBAG ON" and "AIRBAG OFF" indicator lights 5. Front passenger occupant classification system (ECU and sensors) 6. Front passenger's switch seat belt buckle 7. Driver's seat belt buckle switch 120 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 353
The front passenger sit as far back as possible from the dashboard. D All vehicle occupants be properly restrained using the available seat belts. For instructions and precautions concerning the seating position, see "-Front seat precautions" on page 56 in this Section. 121 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 354
part of your body on or in front of the dashboard or steering wheel pad that houses the front airbag system. They might restrict inflation or cause death or serious injury as they are projected rearward by the force of the deploying airbags. Likewise, the driver and front passenger should not hold - 2006 Toyota Sienna | Owners Manual - Page 355
end structure, console, steering column, steering wheel or dashboard near the front passenger airbag This indicator comes on when the ignition switch is turned to the "ON" position. It goes off after about 6 seconds. This means the SRS front airbags are operating properly. 123 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 356
was not severe enough to cause the SRS front airbags to inflate. D The light comes on or starts flashing while driving. D The pad section of the steering wheel or dashboard (shaded in the illustration) is scratched, cracked, or otherwise damaged. 124 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 357
disconnect the battery cables before contacting your Toyota dealer. The SRS side airbag on the passenger seat will not activate if there is no passenger sitting in the front passenger seat. However, the side airbag on the passenger seat may deploy if luggage is put on the seat, or the seat belt is - 2006 Toyota Sienna | Owners Manual - Page 358
of the vehicle body other than the passenger compartment as shown in the illustration. The SRS side airbags and curtain shield airbags are designed to inflate when the passenger compartment area suffers a severe impact from the side. Always wear your seat belts properly. 126 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 359
and "AIRBAG OFF" indicator lights 3. Curtain shield airbag modules (airbag and inflator) 4. Front passenger occupant classification system (ECU and sensors) 5. Side airbag modules (airbag and inflator) 6. Curtain shield airbag sensors 7. Side and curtain shield airbag sensors 127 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 360
side passengers must: D Do not allow anyone to lean against the door when the vehicle is in use, since the side airbag and curtain shield airbag could a side airbag, and to the front and side pillars and roof side rail with a curtain shield airbag. 128 2006 SIENNA from March '06 Prod. ( - 2006 Toyota Sienna | Owners Manual - Page 361
device or object on or around the door. When the side airbag inflates, the cup holder or any other device or object airbag may not activate correctly, resulting in death or serious injury. Likewise, the driver and front passenger should not hold objects in their arms or on their knees. 129 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 362
D Do not modify or replace the seats or upholstery of the seats with side airbags. Such changes may prevent the side airbag system from activating correctly, disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury. 130 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 363
seat belt buckle switch, front passenger occupant classification system, "AIRBAG ON" indicator light, "AIRBAG OFF" indicator light, front passenger's seat belt buckle switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. (For details, see "Service reminder - 2006 Toyota Sienna | Owners Manual - Page 364
pillars or roof side rail garnishes (padding) containing the curtain shield airbags inside (shaded in the illustration) is scratched, cracked, or otherwise damaged. NOTICE Do not disconnect the battery cables before contacting your Toyota dealer. 132 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 365
front passenger airbag, side airbag on the front passenger seat and front passenger's seat belt pretensioner. The "AIRBAG OFF" indicator light will be illuminated when the ignition switch is in the "ON" position with the condition 2 in the table shown below. To ensure the system correctly detects - 2006 Toyota Sienna | Owners Manual - Page 366
that, the front passenger occupant classification system operates and judges which indicator light be illuminated. The SRS warning light and "AIRBAG OFF" indicator light will come on if there is a malfunction in the front passenger occupant classification system. 134 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 367
/warning light Condition detected by the front passenger occupant classification system 1. Adult∗1 2. or child restraint system∗3 Child∗2 "AIRBAG ON" and "AIRBAG OFF" indicator lights "AIRBAG ON" "AIRBAG OFF" Not illuminated "AIRBAG OFF" Front passenger's seat belt reminder light Flashing∗4 Flashing - 2006 Toyota Sienna | Owners Manual - Page 368
the seatback excessively may lessen the effectiveness of the seat belt system. sure the "AIRBAG ON" indicator light is illuminated when using the seat belt extender for the front passenger seat. If the "AIRBAG OFF" indicator light is illuminated, disconnect the extender tongue from the seat - 2006 Toyota Sienna | Owners Manual - Page 369
using a seat belt or child restraint system depending on the age and size of the child passenger seat or subject it to severe impact. Otherwise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. 137 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 370
possible even if the "AIRBAG OFF" indicator light is illuminated, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously injured. D Do not use the seat belt extender when installing a child restraint system on the front or - 2006 Toyota Sienna | Owners Manual - Page 371
portion of the lap/shoulder belt. You must carefully consult the manufacturer's instructions which accompany the child restraint system. To provide proper restraint, use a child restraint system following the manufacturer's instructions about the appropriate age and size of the child for the child - 2006 Toyota Sienna | Owners Manual - Page 372
if the "AIRBAG OFF" indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag could cause death or serious injury to the child if the rear- facing child restraint system is installed on the front passenger seat. 140 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 373
seat center position, adjust both seatbacks to the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in a collision. 1. Run the lap and shoulder belt through or around the infant seat following the instructions provided - 2006 Toyota Sienna | Owners Manual - Page 374
infant seat securely, make sure the belt is in the lock mode before letting the belt retract. 3. While pressing against the seat let the shoulder it will go to hold ly. the infant seat firmly cushion and seatback, belt retract as far as the infant seat secure- 142 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 375
- facing or rear- facing position depending on the age and size of the child. When installing, follow the manufacturer's instructions about the applicable age and size of the child as well as directions for installing the child restraint system. 143 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 376
key is turned to the "ON" position, then the SRS front passenger airbag and side airbag on the passenger side may deploy in an accident. Do not drive the vehicle in this condition. Remove the child restraint system and contact your Toyota dealer. 144 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 377
. Always move the seat as far back as possible even if the "AIRBAG OFF" indicator light is illuminated, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously injured. 145 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 378
if it interferes with the lock mechanism of the front (or second) seats. Otherwise, the child or front (or second) seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. D When installing a child restraint system in the third seat center position, adjust both - 2006 Toyota Sienna | Owners Manual - Page 379
the seat belt is fixed. 2. Fully extend the shoulder belt to put it in the lock mode. When the belt is then retracted even slightly, it cannot be extended. To hold the convertible seat securely, make sure the belt is in the lock mode before letting the belt to retract. 147 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 380
all the installation instructions provided by its manufacturer. 4. To remove the convertible seat, press the buckle release button and allow the belt to retract completely. The belt will move freely again and be ready to work for an adult or older child passenger. 148 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 381
from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the side airbag and/or curtain shield airbag inflate, and the impact could cause death or serious injury to the child. 149 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 382
inserting the tab, make sure the tab and buckle are locked and that the lap and shoulder portions of the belt are not twisted. D Do not insert coins, clips, etc. in the buckle as this may prevent your child from properly latching the tab and buckle. 150 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 383
install the child restraint system on the seat until the seat belt is fixed. 2. To remove the booster seat, press the buckle release button and allow the belt to retract. Follow the procedure below for a child restraint system that requires the use of a top strap. 151 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 384
the back of the second seats to attach the top strap. Anchor brackets are installed for each second seating position. Anchor brackets 7- passenger models TO USE THE ANCHOR BRACKET: 1. Remove the head restraint. Anchor brackets 8- passenger models 152 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 385
2. Fix the child restraint system with the seat belt. Latch the hook onto the anchor bracket and tighten the top strap. For instructions to install the child restraint system, see "Child restraint" on page 137 in this Section. 3. Replace the head restraint. Follow the procedure below for a child - 2006 Toyota Sienna | Owners Manual - Page 386
the head restraint. 2. Fix the child restraint system with the seat belt. Latch the hook onto the anchor bracket and tighten the top strap. For instructions to install the child restraint system, see "Child restraint" on page 137 in this Section. 154 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 387
. D Make sure the top strap is securely latched, and check that the child restraint system is secure by pushing and pulling it in different directions. Follow all the installation instructions provided by its manufacturer. 8- passenger models 155 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 388
are relocked into place. Next pull back the seatback to the 1st lock position (the most upright position). Then adjust the seatback to the 5th lock position. Make sure the seat and seatback are locked securely. Type A Canada only Type B Canada only 156 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 389
slide or recline the seat. D Do not install a child restraint system on the second seat if it interferes with the lock mechanism of the front seats. Otherwise, the child or front seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. 157 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 390
adjusting switch. (The seat back will automatically stop.) For details of these switch operations, see page 95. Do not touch the switch while the seatback is moving, because the operation will stop. Manual seat Canada only Power seat Type A 158 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 391
put a child restraint system on the third seat if it interferes with the lock mechanism of the second seats. Otherwise, the child or front (or second) seat occupant(s) may be killed or seriously injured in case of sudden braking or a collision. Canada only Type B 159 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 392
06 SIENNA_U (L/O 0603) 160 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 393
) SECTION Steering wheel and Mirrors 1- 4 162 162 165 165 166 OPERATION OF INSTRUMENTS AND CONTROLS Tilt and telescopic steering wheel ...Outside rear view mirrors ...Anti- glare inside rear view mirror ...Auto anti- glare inside rear view mirror ...Vanity mirrors ... 161 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 394
mirror. Be careful when judging the size or distance of any object seen in the outside rear view mirror on the passenger's side because it is a convex mirror. Any object seen in a convex mirror will look smaller and farther away than when seen in a flat mirror. 162 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 395
the headlights of the vehicle behind you. (For details, see "Auto anti- glare inside rear view mirror" on page 165 in this position. Vehicles with the driving position memory system-The position of the outside rear view mirrors and driver's seat 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 396
and any mirror malfunction, do not touch the mirror while it is moving. D Do not drive with the mirrors folded backward. Both the driver and passenger side rear view mirrors must be extended and properly adjusted before driving. Type B 164 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 397
the rear of your vehicle in the mirror. This mirror is equipped with auto antiglare function. The function is designed to reduce glare from the headlights of in the automatic function mode. The indicator illuminates to show you that the function is on. 165 2006 SIENNA from March '06 Prod. ( - 2006 Toyota Sienna | Owners Manual - Page 398
darkens slightly to reduce the reflected light. To turn off the automatic function, push the "OFF" switch. To turn on the automatic function again, push the "AUTO" switch. Adjust it before driving so that the rear view is in the best condition. When the inside air temperature is low, it may take - 2006 Toyota Sienna | Owners Manual - Page 399
Opening or closing any of front and sliding doors. D Turning off all the "ON" lights. All the lights are cut off when all the side doors and back door are locked by key or wireless remote control transmitter. The ignition switch must be turned off. 167 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 400
06 SIENNA_U (L/O 0603) 168 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 401
...177 Luggage compartment light ...178 Ignition switch light ...179 Exterior foot lights ...179 Windshield wipers and washer ...180 Rear window wiper and washer ...181 Rear window and outside rear view mirror defoggers and windshield wiper de- icer ...182 169 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 402
running. D The knob is in the "OFF" position or position 1. On some models- For the U.S.A.-The headlight indicator lights up in the instrument cluster. D The parking brake is released. To turn off the DRL system, twist the knob to position 2 or turn the ignition switch off. 170 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 403
and all of the You can flash the high beam headlights with the knob turned to "OFF". On some models- For the U.S.A.-The headlight indicator lights up in the instrument cluster. Position 3 ("AUTO")-Headlights and/or all of the lights in position 1 171 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 404
actuate the headlight switch. If you are going to park for over one week, make sure the headlight switch is off. NOTICE To prevent the battery from being discharged, do not leave the lights on for a long period when the engine is not running. 172 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 405
change, move the lever up or down to the pressure point (position 2) and hold it. If the turn signal indicator lights (green lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. D The parking brake is released. To turn off the DRL system, twist - 2006 Toyota Sienna | Owners Manual - Page 406
. Always keep the headlight beam at the proper level, or your headlights may dazzle other road users. Driver + full luggage loading to the luggage compartment 7- passenger models 0 1 1 1 1 8- passenger models 0 0 1 2 2 174 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 407
prevent the battery from being discharged, do not leave the switch on longer than necessary when the engine is not running. Instrument panel light control To . The turn signal light switch will not work when the emergency flashers are operating. 175 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 408
each lens. "DOOR"-Turns the light on when any of the side doors or back door is opened. To turn on the front fog lights, twist the band of the headlight and turn signal switch lever. They will come on only when the headlights are on low beam. Personal light main switch 176 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 409
this system. For details, contact your Toyota dealer. D Cancelling the door key or the wireless remote control transmitter linked operation D Cancelling the ignition switch linked operation. D Changing the duration of lighting To prevent the battery being discharged, the lights will automatically - 2006 Toyota Sienna | Owners Manual - Page 410
both the sliding doors and back door are closed. To prevent the battery being discharged, the lights will automatically turn off when the key is removed and the door is left opened with the switch at the "DOOR" position for 20 minutes or more. Personal light main switch 178 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 411
switch is turned to the "LOCK" position. The light remains on for about 15 seconds after all the side doors and back door are closed. However, in the following cases, the light goes off immediately. To prevent the battery being discharged, the light will automatically turn off when the key is - 2006 Toyota Sienna | Owners Manual - Page 412
will operate a couple of times after the washer squirts. For instructions on adding washer fluid, see "Adding washer fluid" on page your vision. D The doors are locked via the switches either inside the driver's or front passenger's door. To turn on the 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 413
dealer to have the vehicle serviced. NOTICE z Do not operate automatically returns from these positions after you release it. The rear window wiper operates while the washer squirts. For instructions on adding washer fluid, see "Adding washer fluid" on page 487 in Section 7- 3. 181 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 414
system will automatically light battery to discharge, especially during stop- and- go driving. The defoggers are not designed for drying rain water or for melting snow. If the outside rear view mirrors are heavily coated with ice, use a spray de- icer before operating the switch. 182 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 415
184 185 186 187 OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ...Engine coolant temperature gauge ...Tachometer ...Odometer and two trip meters ...Service reminder indicators and warning buzzers ... 183 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 416
at "E" It is a good idea to keep the tank over 1/4 full. The needle moves when braking, accelerating or making turns. This is caused by the movement of the fuel in the tank. If possible. Type A Type A Low fuel level warning light Type B Type B 184 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 417
speed or stopping after high speed driving. D Idling for a long period with the air conditioning on in stop- and- go traffic. D Towing a trailer. NOTICE Do not let the indicator needle get into the red zone. This may cause severe engine damage. 185 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 418
Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter the electrical power source is disconnected. 186 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 419
and buzzer) Fasten driver's seat belt. (c) Fasten front passenger's seat belt. (d) Stop immediately and contact Toyota dealer. (e) or Take vehicle to Toyota dealer. (f) Low fuel level warning light Fill up tank. (g) Stop and check. 187 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 420
(l) Vehicles with vehicle stability control system-Adjust tire inflation pressure and turn off warning light by pushing reset switch for a few seconds. If warning light remains, contact Toyota dealer. (m) Add washer fluid. (n) Replace engine oil. 188 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 421
light Check if an object is caught between third seat and seatback and/or between third seat and floor. If nothing is caught, contact Toyota dealer. Check condition according to warning code. If system malfunctions, contact Toyota dealer. (p) (q) Key reminder buzzer Remove key. 189 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 422
the seat belt is not buckled up. If luggage or other load is placed on the front passenger seat, depending on its weight and how it is placed on the seat, built- in sensors in the seat cushion may detect the pressure, causing the reminder light to flash. D The brake system warning light remains on - 2006 Toyota Sienna | Owners Manual - Page 423
tank cap is not loose... D There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself. Contact your Toyota dealer as soon as possible to service the vehicle. If engine speed does not - 2006 Toyota Sienna | Owners Manual - Page 424
lock brake system does not operate but the brake assist system still operates. In this case, the wheels could lock up during a sudden braking or braking on slippery road surfaces. NOTICE Do not drive the vehicle with the warning light on-even for one block. It may ruin the engine. 192 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 425
the wheels could lock up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle - 2006 Toyota Sienna | Owners Manual - Page 426
classification system, "AIRBAG ON" indicator light, "AIRBAG OFF" indicator light, front passenger's seat belt buckle switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. If any of the this indicates or seat belt Toyota dealer following conditions occurs - 2006 Toyota Sienna | Owners Manual - Page 427
If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace it as soon as possible. The system must be reset after the engine oil replacement. Reset the system by the following procedure - 2006 Toyota Sienna | Owners Manual - Page 428
do not start the engine. All the service reminder indicators except the open door warning light should come on. The "ABS" and "VSC" warning lights, low tire pressure warning light, dynamic laser cruise master warning light and engine oil replacement reminder light go off after a few seconds. The SRS - 2006 Toyota Sienna | Owners Manual - Page 429
Ignition switch, Transmission and Parking brake Ignition switch ...Automatic transmission ...Traction control system ...Vehicle stability control system ...Tire pressure warning system ...Parking brake ...Cruise control ...Dynamic laser cruise controll ... 197 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 430
key is turned to the "ACC", "ON" or "START" position. NOTICE Do not leave the key in the "ON" position if the engine is not running. The battery will discharge and the ignition could be damaged. 198 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 431
06 SIENNA_U (L/O 0603) Automatic transmission Your automatic transmission has a shift lock system to minimize the possibility of incorrect operation. This means you can only shift out of "P" position when the brake pedal is depressed (with the ignition switch in the "ON" position). (a) Selector - 2006 Toyota Sienna | Owners Manual - Page 432
(26 mph) 225/60R17 tires ...44 km/h (27 mph) All- wheel drive models ...42 km/h (26 mph) CAUTION Never put your foot on the accelerator pedal while shifting. 3. Release the parking brake and brake pedal. Depress the accelerator pedal slowly for smooth starting. 200 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 433
"D" to "4", engine braking will not be enabled first gear and automatically shift to third gear or second gear. Two- wheel drive models "3" ...90 automatic transmission damage from overheating. To prevent such damage, "4" position should be used in hill climbing or hard towing. 201 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 434
afterward. D When towing a trailer, in order to maintain engine braking efficiency, do not use "D" position. CAUTION Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. 202 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 435
system automatically turns on. When the traction control system is operating, the following conditions occur: D The system controls the spinning of the front wheels. At this time, the slip indicator light blinks. D You may feel vibration or noise in your vehicle, caused by operation of the brakes - 2006 Toyota Sienna | Owners Manual - Page 436
come on when the ignition key is turned to "ON" and will go off after a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. 204 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 437
so that it can operate when needed. You may hear a sound in the engine compartment for a few seconds just after the vehicle begins to move. This means that the traction control system is in the self- check mode, but does not indicate a malfunction. 205 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 438
come on when the ignition key is turned to "ON" and will go off after a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. 206 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 439
size, the vehicle stability control system may not function correctly. When replacing the tires or wheels, contact your Toyota dealer. (See "Checking and replacing tires" on page 474 in Section 7- 2.) If the vehicle is going to skid during driving, the slip indicator light blinks and an alarm sounds - 2006 Toyota Sienna | Owners Manual - Page 440
come on when the ignition key is turned to "ON" and will go off after a few seconds. If the light comes on while driving, the system does not work. However, as conventional braking operates when applied, there is no problem to continue your driving. 208 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 441
system-If the light remains on after the reset switch has been pushed, have the tire pressure warning system checked at your Toyota dealer. If you have a flat tire, replace it with the spare tire. For details, see "If you have a flat tire" on page 421 in Section 4. Vehicles with run- flat tires - 2006 Toyota Sienna | Owners Manual - Page 442
the run- flat tires, see "Run- flat tires" on page 476 in Section 7- 2. If the warning light blinks once every second: The low tire pressure warning system may be malfunctioning. Contact your Toyota dealer. If the warning light blinks twice every second: The low tire pressure warning system needs - 2006 Toyota Sienna | Owners Manual - Page 443
tire pressure warning system need to be initialized in the following conditions: D When the low tire pressure warning light blinks twice every second D After replacing or rotating tires or wheels When initializing the system, the present tire condition is stored as a standard. 211 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 444
to the above procedure. D The vehicle speed is between 50 km/h (31 mph) and 100 km/h (62 mph). D The roads are dry, smooth and straight. D The number of passengers is 1 or 2 (including driver). When initializing the system, make sure the low tire pressure warning light blinks three times. If - 2006 Toyota Sienna | Owners Manual - Page 445
, changes in brake reminder light is off. D Avoid vehicle speed increases when driving downhill. If the vehicle speed is too fast in relation to the cruise control set speed, cancel the cruise control then downshift the transmission to use engine braking to slow down. Type B 213 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 446
light is off. TURNING THE SYSTEM ON AND OFF To turn the cruise control on, press the "ON- OFF" button. The "CRUISE" indicator light system is also automatically turned changes the set speed by 1.6 km/h (1.0 mph). You can now take your foot off the accelerator pedal. 214 2006 SIENNA from March ' - 2006 Toyota Sienna | Owners Manual - Page 447
system is still in operation. To turn the cruise control off, press the "ON- OFF" button. Make sure the "CRUISE" indicator light is off. If the cruise control automatically with the cruise control on, engine braking will not be enabled because the cruise 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 448
the following instructions. D The indicator light does not come on. D The indicator light flashes again. D The indicator light goes out after it comes on. If this is the case, contact your Toyota dealer and have your vehicle inspected. Steering wheel Instrument cluster 216 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 449
light (conventional cruise control mode indicator light) 5. "CRUISE" indicator light 6. "READY" indicator light (ready mode indicator light) 7. Master warning light D Conventional (fixed speed) cruise conYou can change the mode by using the control lever. 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 450
system conditions while using dynamic laser cruise control. The dynamic laser cruise control function operates automatically and depending on whether a vehicle is detected ahead may change the speed of your vehicle as follows. If no vehicle is running 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 451
because of insufficient automatic deceleration, then the alarm warns you to also manually apply brakes. 3. Follow- up cruising function: After deceleration, your vehicle cruising speed changes in proportion the nose of your vehicle to tilt up. 219 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 452
road surfaces), the tires will race and braking. (In this case, automatic braking will not work.) If there is a vehicle detected ahead, the delay in deceleration timing could cause serious injury or death. When the alarm sounds certain conditions where the 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 453
start or end of a curve, or narrow driving lanes due to road construction) or your vehicle condition (steering wheel maneuvering, a motorcycle running on the side of the same lane will occur. In this case, the dynamic laser cruise control system will not 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 454
, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. TURNING THE SYSTEM ON AND OFF on again. When the ignition is turned off, the system is also automatically turned off. To use dynamic laser cruise control again, 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 455
the control prior to acceleration. You cannot set a desired speed if the master warning light comes on, the alarm sounds and the display indicates one of the warning codes "E1", "E2" or " CANCEL" direction and releasing it D Depressing the brake pedal 223 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 456
speed. However, a faster way to reset is to depress the brake pedal and then push the lever down in the "- SET" direction speed traveling downhill while you are pushing the lever down, the system will memorize the upper limit of the preset speed as a preset 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 457
distance switch setting changes to SHORT and can confirm the Select the vehicle- to- vehicle distance considering traffic conditions. The approximate engine braking cannot be applied properly, braking control is automatically activated. At this time, the display flashes. 225 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 458
ahead decelerates abruptly or if another vehicle cuts in ahead of you, inadequate braking will make your vehicle become closer to the vehicle ahead of you and the display will flash and beep. D In the following conditions, the approach warning may not turn on even if the vehicle drives closer - 2006 Toyota Sienna | Owners Manual - Page 459
result in system malfunction. A special device is required to adjust the laser radar sensor alignment. Be sure to have the sensor adjusted by your Toyota dealer. D Do not affix a sticker (including a transparent sticker) or attach an accessory around the laser radar sensor. 227 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 460
up or down grades. However, changes in vehicle speed may occur on steeper not activate and no alarm will sound even if you the front In the above conditions, push the lever up in system might have malfunctioned. Although there is no problem to continue driving, contact your Toyota dealer. 228 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 461
, cruising speed must be reset when the conventional cruise control mode is turned on again. CAUTION To avoid accidentally engaging the cruise control, turn the system off when it is not in use. Make sure the "CRUISE" indicator light is off. 229 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 462
if the master warning light comes on, the alarm sounds and the display indicates brake pedal Under certain circumstances, the conventional cruise control mode is temporarily cancelled: D When vehicle speed falls below 40 km/h (25 mph) D When vehicle stability control is activated 230 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 463
WARNING CONTROL If there is trouble in the conventional cruise control mode, the "CRUISE" indicator light in the instrument cluster flashes, the master warning light comes on and the alarm sounds, the warning code "E3" will appear on the display. If a system malfunction is detected when the - 2006 Toyota Sienna | Owners Manual - Page 464
06 SIENNA_U (L/O 0603) 232 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 465
Reference ...Using your audio system ...AUX adapter ...Audio remote controls ...Rear seat entertainment system ...Audio/video system operating hints ... For vehicle equipped with Navigation system, please refer to the separate "Navigation System Owner's Manual". 233 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 466
playing, it will come on again. SWITCHING BETWEEN FUNCTIONS Push "AM", "FM1", "FM2", "DISC·AUX" "LOAD" if the system is already on but you want to switch from one function to another. Type 2- 1: AM·FM radio/compact disc player with changer 234 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 467
To prevent damage to the antenna, make sure it is removed before driving your Toyota through an automatic car wash. z On- glass antenna: Putting a film (especially a conductive or metallic film) on the rear window will noticeably reduce the sensitivity of the radio. 235 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 468
the compact disc changer. Insert only one compact disc into slot at a time. z Never try to disassemble or oil any part of the compact disc player. Do not insert anything except a compact disc into the slot. 236 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 469
06 SIENNA_U (L/O 0603) -Controls and features "Type 1 Details of specific buttons, controls and features are described in the alphabetical list that follows. 237 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 470
accordance with ambient noise levels. This helps ensure an optimal listening experience even when road, wind or other ambient noise levels rise. RSE: Vehicles with a rear seat entertainment system-The system can be locked. For details, see page 267 in this Section. 238 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 471
between CD, DVD, and AUX (external device) modes, press the "DISC·AUX" button. The AUX mode is only available when AUX adapter is connected to the system. When the AUX adapter is in use, "AUX" will appear on the display. Error messages If the player malfunctions, your audio system will display - 2006 Toyota Sienna | Owners Manual - Page 472
" pear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the first track on the disc and replay. To turn off the repeat feature, push this button again. 240 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 473
appear on the display. When " the file ends, it will repeat automatically. This process will be continued until you push player will scan up the first track of the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scanning. 241 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 474
playing. Vehicles with rear seat entertainment system- While the DVD player is in operation, the chapter or track can be changed by pushing the "Ɯ" or "Ɲ" side of the "SEEK/TRACK" button. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast - 2006 Toyota Sienna | Owners Manual - Page 475
will appear. MP3/WMA player This button is used to change the display for the MP3/WMA file that contains text data. To change the display, quickly push MP3/WMA player Turn the knob clockwise to file up. Turn the knob counterclockwise to file down. 243 2006 SIENNA from March '06 Prod. - 2006 Toyota Sienna | Owners Manual - Page 476
06 SIENNA_U (L/O 0603) "Type 2- 1 Details of specific buttons, controls and features are described in the alphabetical list that follows. 244 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 477
06 SIENNA_U (L/O 0603) "Type 2- 2 Details of specific buttons, controls and features are described in the alphabetical list that follows. 245 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 478
the button, the compact disc player will resume playing. AM Push the "AM" button to turn on the radio and select the AM band. "AM" will appear on the display. AUDIO CONTROL (Tone and sound balance adjustment function) Each time you push the "AUDIO CONTROL" knob, the mode changes. To adjust the tone - 2006 Toyota Sienna | Owners Manual - Page 479
between CD, DVD, and AUX (external device) modes, press the "DISC·AUX" button. The AUX mode is only available when AUX adapter is connected to the system. When the AUX adapter is in use, "AUX" will appear on the display. Error messages If the player malfunctions, your audio system will display - 2006 Toyota Sienna | Owners Manual - Page 480
) and MP3/WMA files, audio data (CD- DA) is played. PWR·VOL (Power and Volume) Push "PWR·VOL" to turn the audio system on and off. Turn "PWR·VOL" to adjust the volume. RAND (Random) Compact disc player There are two random features-you can either listen to the tracks on one compact disc in - 2006 Toyota Sienna | Owners Manual - Page 481
the display. When " the track ends, it will automatically replay. To turn off the repeat player will repeat all of the files in the folder. When the last file in the folder ends, the folder will repeat from the beginning. To turn off the repeat feature, push this button again. 249 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 482
: Push "SCAN" until you hear a beep. " ·SCAN" will appear on the display and the player will scan the first file of the next folder. To select a folder, push the "SCAN" again. After all the folders have been scanned in one pass, normal play resumes. 250 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 483
system- While the DVD player is in operation, the chapter or track can be changed by pushing the "Ɯ" or "Ɲ" side of the "SEEK/TRACK" button. ST (Stereo reception) display Your radio automatically changes hear a beep. The rest of the title will appear. 251 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 484
on the display. To adjust the volume, turn the "PWR·VOL" knob. When using a portable audio device connected to the power outlet or cigarette lighter, noise may occur during playback. If this happens, use the power source of the portable audio device. 252 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 485
(steering switches) Some parts of the audio system can be adjusted using the switches on the steering wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switch 2. " ƜƝ" switch 3. "MODE" switch 253 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 486
is ready to use. The DVD player will be selectable if a rear seat entertainment system is installed in your vehicle. To turn the audio system on, push the "MODE" switch. To turn the audio system off, push and hold the "MODE" switch until the system turns off. 254 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 487
. 1. Headphone volume control dials and headphone jacks 2. DVD player 3. Rear seat entertainment system display 4. Front audio system 5. Power outlet main switch 6. Power outlets 7. A/V input adapter 8. Rear seat entertainment system controller 255 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 488
. The rear passengers can enjoy DVD video, audio CD, video CD, CD text, dts- CD and MP3. The rear seat entertainment system can play DVD video, audio CD, video CD, CD text, dts- CD or MP3 only when a disc is loaded in the DVD player. You can enjoy videos and sound when your personal audio system is - 2006 Toyota Sienna | Owners Manual - Page 489
, push the lock release button. Pull the display down to an easily viewable angle (between 90_ and 125_) To close, push the display up until you hear a click. The illumination of the screen is automatically turned off when the display is closed. However, the rear seat entertainment system is not - 2006 Toyota Sienna | Owners Manual - Page 490
procedure. CAUTION Do not disassemble or modify the controller. It may cause an accident, fire or electric shock. NOTICE Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to explode or leak. 258 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 491
06 SIENNA_U (L/O 0603) 1. Remove the cover of the controller as shown. 2. Remove the insulating sheet. 259 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 492
controller to the signal reception portion of the rear seat entertainment system display. The controller does not operate properly when the signal reception , stow the controller in the console box or front seat side table when it is not in use. 260 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 493
video device. 3. "OFF" button This button turns off the rear seat entertainment system. 4. Joystick This joystick selects a control switch, mode switch on the screen or " " button This button fast forwards a screen when the DVD player is operated. 261 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 494
and brightness of the screen. 15. "SIZE" button This button changes the display mode when the DVD player is operated. CAUTION Special care should be taken to prevent small children from swallowing the removed battery or components. NOTICE z When replacing the battery, be careful not to lose the - 2006 Toyota Sienna | Owners Manual - Page 495
and put in the new batteries as shown. Install the cover. z Close the battery case securely. After replacing the battery, check that the controller operates properly. If the controller still does not operate properly, contact your Toyota dealer. 263 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 496
switches on the screen when the DVD player is operated. 6. Joystick/"ENT" button The joystick selects a control switch, mode switch on the screen or the menu for the disc. The "ENT" button inputs the selected switch or the selected menu for the disc. 264 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 497
load screen changes to the DVD player operation screen. When the "VIDEO" button is pushed, the images and sounds from the personal audio machine are output. The "DVD" button is effective only when a disc is inserted. This button ejects a disc. Controller DVD player unit 265 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 498
. When the front audio system is turned off, the rear audio system and the DVD player will be turned off simultaneously. Vehicles with navigation system-The rear seat entertainment system can be switched ON and OFF by pushing the "Rear" switch on the front audio system. 266 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 499
for approximately 6 seconds. Even when the rear system lock is turned on during play mode, the images and sounds continue without interruption. The condition of the rear system lock is maintained, even when the ignition switch is turned off. 267 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 500
06 SIENNA_U (L/O 0603) -DVD player The DVD player can play audio CDs/ MP3 CDs, DVD video discs, CD texts, dts- CDs and video CDs. For appropriate discs for this player, see "Audio/video system operating hints" on page 297 in this Section. The DVD player works when the ignition key is in the "ACC" - 2006 Toyota Sienna | Owners Manual - Page 501
. The DVD player can be operated with the controller buttons directly. 1. "DVD" button 2. "SET UP" button 3. "MENU" button 4. "AUDIO" button 5. "SUB TITLE" button 6. "ANGLE" button 7. "SIZE" button 8. "SEARCH" button 9. "TOP MENU" button 10 AA" and """" buttons 269 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 502
the screen by touching them directly. When the switch is selected by the joystick, the outline of the switch changes to blue. Push the "ENT" button, and the switch will be highlighted in green. Controller Controller DVD player unit DVD player unit 270 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 503
ON AND OFF To turn on the operation switches, push the "OPTION" button on the controller. Top page (DVD video operation switch) Top page (video CD) Second switch) page (DVD video operation Second page (video CD) 271 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 504
switches on the "Page 1" and "Page 2" screens. To change the screen, push the "Page 1" or "Page 2" switch on the screen. On the screen If " " appears on the screen when you select a switch, it indicates that the switch cannot work. Controller 272 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 505
volume assuming that the conversations represent the maximum volume level available for the DVD, you may be startled by louder sound effects or when you change to a different audio source. Loud sounds may have a significant impact on the human body or pose a driving hazard. Keep this in mind when - 2006 Toyota Sienna | Owners Manual - Page 506
screen by pushing the "MENU" or "TOP MENU" button on the controller. For the operation of the menu screen, see the separate manual for the DVD disc. You can select the menu for the disc by the joystick and the "ENT" button on the controller. 274 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 507
/buttons: Push and hold the "AA" or """" switch/button to fast forward or reverse. When you release the switch/button, the DVD player will resume playing. Push the """" switch/button while pausing, the DVD video plays the slow- motion video replay. 275 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 508
the controller. To skip to the predetermined screen, push the "Return" switch. The DVD player starts playing from the beginning of the predetermined screen. For further details of the predetermined screen, see the separate manual for the DVD disc. 276 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 509
Sub Title" switch on the screen, and then the changing subtitle language screen will appear. You can also display The player starts playing disc for that title number. The selected title number will appear on the screen. Push the "Back" switch to return to the menu screen. 277 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 510
(L/O 0603) CHANGING AUDIO LANGUAGE Push the "Audio" switch on the screen and then the changing audio language screen will appear. You can also display the screen by pushing the "AUDIO" button on selected subtitle language will appear on the screen. 278 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 511
time you push the "Audio" switch, another language stored on the disc is selected. To turn off the audio language screen, push the "Hide Buttons" switch. Push the "Back" switch to return to the previous screen. The selected audio language will appear on the screen. 279 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 512
. You can change the initial setting. After the setting is done, the player plays from the changes. The angle number which you can select will appear on the screen. To turn off the screen, push the "Hide Buttons" switch. Push the "Back" switch to return to the previous screen. 280 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 513
"Others" switch. The "Enter Audio Lang. Code" screen will appear. There are initial setting switches on the "Setup Menu" screen. After you change the initial setting, push the " . To return to the "Select Audio Lang." screen, push the "Back" switch. 281 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 514
again. To return to the "Select Subtitle Lang." screen, push the "Back" switch on the screen. CHANGING THE DVD LANGUAGE To display the "Select DVD Lang." screen, push the "DVD Language" switch on . The "Enter DVD Lang. Code" screen will appear. 282 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 515
" switch on the screen, the angle mark turns on or off alternately. SETTING LEVEL RESTRICTIONS OF VIEWER You can restrict the play back screen , push the "Parental Lock" switch on the "Setup Menu" screen. The "Enter Personal Code" screen will appear. 283 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 516
SIZE" button on the controller causes the display modes to change sequentially as follows: Normal Wide1 Wide2 Enter the password and push the "ENT" button. The "Select Restriction Level" screen will appear. You cannot change the "Setup Menu" screen. 284 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 517
1009 1023 Fiji Faroese Frisian Irish Scots- Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese 285 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 518
2014 2015 2018 Slovak Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen Tagalog Setswana Tonga Turkish 286 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 519
the screen. USING THE CONTROL SCREEN When playing a disc, push the "DVD" button on the controller. The status screen will appear on the screen. 287 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 520
(L/O 0603) -DVD player operation (video CD/audio CD/CD text/MP3) SELECTING THE DISC MENU NUMBER (video CD only) Push the " , release the switch. Video CD only- Push the """" switch/button while pausing, the DVD video plays the slow- motion video replay. 288 2006 SIENNA from March '06 Prod. - 2006 Toyota Sienna | Owners Manual - Page 521
the disc. For the operation of the menu screen, see the manual for the video CD. CHANGING MENU (video CD only) PAGE OR TRACK CHANGING A MULTIPLEX TRANSMISSION (video CD only) Push the "Main/Sub" switch to change a multiplex transmission. The mode changes from Main/Sub to Main to Sub and back to - 2006 Toyota Sienna | Owners Manual - Page 522
this switch again. 3. "SCAN" switch (audio CD and CD text) Push the "SCAN" switch. The player will scan all the tracks on the disc. To stop scanning, push this switch again. When the player has scanned all the tracks on the disc, it will stop scanning. CD MP3 290 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 523
will be played. 6. "DETAIL" switch When the switch is pushed while a track is played, the detailed file information of the track will be displayed. 291 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 524
Strengthens the contrast Strengthens the tone Strengthens the green color The audio machine connected to the input terminal adapter can be played in the video mode. To select the video mode, push "VIDEO" button on the controller. the Color 292 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 525
the number of audio tracks. Indicates the number of language subtitles. Indicates the number of angles. Indicates the screen to be selected. Wide screen: 16:9 Standard: 4:3 Indicates regions in which this video disc can be played. ALL: all countries Number: region code 293 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 526
is prohibited. "dts" is a trademark of Digital Theater Systems, Inc. The rear entertainment system plays videos and sound when an audio- video equipment is connected to the A/V input adapter. For details, refer to the manufacturer's instructions. 294 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 527
Audio input adapter White: Audio input adapter This power outlet is designed for use as a power supply for the audio The power supply will restart automatically when you use an appliance instrument panel. An indicator light will illuminate to indicate that 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 528
may cause radio noise. D Appliances with high initial peak wattage: cathode- ray tube type televisions, compressor- driven refrigerators, electric pumps, electric tools, etc. D Measuring devices which process precise data: medical equipment, measuring instruments, etc. 296 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 529
, video CD, dts- CD or audio CD into the DVD player. z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the system which you are listening to. However, this does not indicate a malfunction. RADIO RECEPTION Usually, a problem with radio reception does not - 2006 Toyota Sienna | Owners Manual - Page 530
dts- CD Copy- protected CD CD- R (CD- Recordable) CD- RW (CD- Re- writable) CD- ROM CAUTION Compact disc players and DVD players use an invisible laser beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the players correctly. 298 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 531
may not be playable on your DVD player. SACD Copy- protected CD CD- R (CD- Recordable) CD- RW (CD- Re- writable) CD- ROM DVD- R DVD+R DVD+RW DVD- RW DVD- ROM DVD- RAM DVD video discs Video CDs Special shaped discs Transparent/translucent discs 299 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 532
of a chapter or track. (To see a pin hole, hold the disc up to the light.) D Remove discs from the compact disc player when you are not playing them. Store them in their plastic cases away from moisture, heat, and direct sunlight. Labeled discs 300 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 533
Media Audio) are audio compression standards. D The MP3/WMA player can play MP3 and WMA files on CD- ROM, CD- R and CD- RW discs. The unit can play disc recordings compatible with ISO 9660 level 1 and level 2 and with the Romeo and Joliet file system. D The emphasis function is available only - 2006 Toyota Sienna | Owners Manual - Page 534
other storage conditions. The unit may be unable to play some damaged discs. D If you insert a CD- RW disc into the MP3/WMA player, playback will begin more slowly than with a conventional CD or CD- R disc. D It is possible to play up to 192 folders or 255 files on one disc. 302 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 535
to about 1/10 the size of that on conventional discs. WMA- WMA (Windows Media Audio) is an audio compression format developed by Microsoft. It compresses files into a size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8, and 9. 303 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 536
06 SIENNA_U (L/O 0603) 304 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 537
conditioning system Controls ...Air flow selector settings ...Operating tips ...Side vents ...Rear manual air conditioning system Controls ...Air flow selector settings ...Rear automatic air conditioning system Controls ...Air flow selector settings ...Air conditioning filter ... 305 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 538
06 SIENNA_U (L/O 0603) Front manual air conditioning system- -Controls 1. "A/C" button 2. Air intake selector 3. Air flow selector 4. Temperature selector 5. Fan speed selector 306 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 539
position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. It is not possible to select RECIRCULATE in this position. For details about air flow selector settings, see "-Air flow selector settings" described below. 307 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 540
source. 1. Recirculate-Recirculates the air inside the vehicle. 2. Fresh-Draws outside air into the system. To prevent fogging up of the windshield, the air intake mode may change automatically to FRESH depending on the condition of the air conditioning system. 308 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 541
, close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except "OFF". 309 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 542
outside air) Air flow-PANEL Air conditioning-ON For quick cooling, turning the temperature selector knob fully towards COLD changes the air intake selector mode to RECIRCULATE. It is not possible to return to FRESH and to turn the air conditioning system off in this position. 310 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 543
position, the air intake selects FRESH automatically. This is to clean up the front view more quickly. It is not possible to return to RECIRCULATE in this position. D To heat the vehicle interior while defrosting the windshield, floor/windshield air flow. choose 311 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 544
temperature setting) 5. "MODE" button (air flow selector) 6. Windshield air flow button 7. Temperature selector ("REAR TEMP") (individual setting on rear passenger side only) 8. Fan speed selector 9. Air intake selector 10. "OFF" button 11. "AUTO" button 312 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 545
the air conditioning, press the "AUTO" button. An indicator light will illuminate to show that the automatic operation mode has been selected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on- off of the air conditioning according - 2006 Toyota Sienna | Owners Manual - Page 546
the air intake mode may change automatically to FRESH depending on the condition of the air conditioning system. "A/C" button To turn on the air conditioning, press the "A/C" button. The "A/C" button indicator will come on. To turn the air conditioning off, press the button again. 314 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 547
, close all windows. If dust thrown up by the vehicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting. 315 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 548
Press in the "AUTO" button. Temperature-To the desired temperature MANUAL OPERATION For best results, set controls to: Heating Fan speed-To the desired fan speed Temperature-Towards high temperature Air intake-FRESH (outside air) Air flow-FLOOR Air conditioning-OFF Air conditioning Fan speed-To - 2006 Toyota Sienna | Owners Manual - Page 549
air flow. choose If air flow control is not satisfactory, check the side vents. The side vents may be opened or closed as shown. D On humid days, do not blow cold air on the windshield-the difference between the outside and inside temperatures could make the fogging worse. 317 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 550
06 SIENNA_U (L/O 0603) Rear manual air conditioning system- -Controls 1. Fan speed selector (rear) 2. Air flow selectors 3. Temperature selector 4. Fan speed selector (front) 318 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 551
to the left to cool. Air flow selectors Push the button to select the vents used for air flow. 1. Panel-Air flows from the roof panel vents. 2. Bi- level-Air flows from both the roof panel vents and floor vent. 3. Floor-Air flows from the floor vent. 319 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 552
06 SIENNA_U (L/O 0603) Rear automatic air conditioning system- -Controls 1. "AUTO" button 2. Air flow selectors 3. Temperature selector (rear) 4. Fan speed selectors 5. "OFF" button 6. "REAR" button 7. Temperature selector (front) 320 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 553
off the rear air conditioning system. Air flow selectors Push the button to select the vents used for air flow. 1. Panel-Air flows from the roof panel vents. 2. Bi- level-Air flows from both the roof panel vents and floor vent. 3. Floor-Air flows from the floor vent. 321 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 554
on the right side of the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent. The air conditioning filter is behind the glove box. 322 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 555
the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, such as inner city or desert areas, early replacement may be required. (For scheduled maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual - 2006 Toyota Sienna | Owners Manual - Page 556
is dirty, it should be replaced. INFORMATION The air filter should be installed properly in position. The use of air conditioning with the air filter removed may cause deteriorated dustproof performance and then affect air conditioning performance. 324 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 557
holder ...Cup holders ...Bottle holders ...Storage box ...Removable console box ...Note pad holder ...Front seat side table ...Coat hooks ...Grocery bag hooks ...Cargo net hooks ...Tie- down hooks ...Roof luggage carrier ...Sun shade ...Floor mat ... 325 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 558
06 SIENNA_U (L/O 0603) Multi- information display- 1. "E/M" button 2. Garage door opener buttons 3. "MODE" button 4. Garage door opener indicator 5. Outside temperature and cruise information display 6. Compass 326 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 559
the front and rear air conditioning displays. The display variations are as follows; Indication English/U.S. Customary System (E) Metric (M) Outside temperature _F _C Instantaneous fuel consumption/ Average fuel consumption MPG L/100 km Distance to empty MI km 327 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 560
the selected channel begins to flash. R The garage door opener ( Universal Transceiver) is manufactured under license from HomeLinkR and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc. 328 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 561
button. The garage door has the rolling code feature if the indicator light (on the HomeLinkR) flashes rapidly and then remains lit after 2 seconds. If your garage transmitter is the "Rolling Code" type, proceed to the heading "Programming a rolling code system". 329 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 562
program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for 5. When the indicator light on the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons. 330 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 563
Center at 1- 800- 331- 4331 (U.S.A.) D When programming the HomeLinkR Universal Transceiver, you may be operating a garage door seconds until the indicator light flashes. If you sell your vehicle, be sure to erase the programs stored in the HomeLinkR memory. 331 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 564
information display indicate general driving conditions. Accuracy varies with driving habits and road conditions. To set the unit, push the "E/M" button until the desired unit display appears. (At this time, front and rear air conditioning displays also change.) 332 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 565
conditions. If fuel consumption is good, the driving range will be longer. If fuel consumption is poor, the driving range will be shorter. D The vehicle is stopped with the engine running consumption. The displayed value is updated every 1 second. 333 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 566
or near the roof.) D The battery has been disconnected. The compass works to calibrate the direction automatically while the vehicle is in motion, if deviation is small. For additional precision or for complete calibrating, see "CALIBRATING THE COMPASS" below. 334 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 567
Do not put magnets or a metal object on or near the roof of the vehicle. Doing this may cause malfunction of the compass sensor. 335 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 568
Guam: Saipan: 5 8 8 After calibration, leaving the system for several seconds returns to the compass mode. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. Zone number 336 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 569
is locked in "N".) CALIBRATING THE COMPASS (circling calibration) Sometimes the direction display on the compass may not change after a turn. In this case, the compass needs to be calibrated. To calibrate the compass manually, do 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 570
calibration after the battery has been removed, replaced or disconnected. manual air conditioning system D During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration. With automatic air conditioning system 338 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 571
the driver and front passenger to be able to look at the rear passengers without turning around. CAUTION Do not adjust the mirror while the vehicle is moving. Be sure to adjust the mirror only when the vehicle is stopped. To use the mirror, push it down. 339 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 572
and an obstruction by indicator and buzzer when parking the vehicle. This system uses sensors to detect obstructions. This system works when the ignition key is at the "ON" position and . 1: Rear sensors 2: Rear corner sensors 3: Front corner sensors 340 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 573
In the following cases, the buzzer will sound several times and the indicator will stay on to indicate that the system is not working properly. Front corner sensors D When the temperature is extremely low. D When any of the sensors are malfunction. 341 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 574
06 SIENNA_U (L/O 0603) This system is designed to inform you of the approximate distance between your vehicle and an less Indicator and buzzer Intermittent Fast intermittent Continuous 1: Front sensors 2: Rear corner sensors 3: Rear sensors 342 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 575
. D In certain situations, the system will not function properly and when the vehicle approaches certain objects, the system will not detect those objects. Therefore, always observe the area around the vehicle and do not rely solely on the system. 343 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 576
motorcycle engine, or an air brake sound from a heavy- duty system works when the ignition key is at the "ON" position and the transmission is in the "R" position. The sensors work only when the transmission is in the "R" position. D When a towing hitch is mounted on your vehicle. 344 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 577
In the following cases, the buzzer will sound several times and the indicator will stay on to indicate that the system is not working properly. Rear corner sensors D When the temperature is extremely low. D When any of the sensors are malfunction. 345 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 578
06 SIENNA_U (L/O 0603) This system is designed to inform you of the approximate distance between your vehicle and an obstacle by indicator the area around the vehicle before driving and start driving slowly. 1: Rear corner sensors 2: Rear sensors 346 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 579
on grass D Do not attach accessories or other objects to the vehicle within the sensor perceptible area. Doing so may cause the system to malfunction, which might result in an accident. D When a device such as a horn from another vehicle, motorcycle engine, or an air brake sound from a heavy- duty - 2006 Toyota Sienna | Owners Manual - Page 580
just under the bumper D Objects very close to your vehicle In the following cases, have Toyota dealer check the system. your D When the bumper is damaged. D When the indicator is continuously on. D Do not use the system when the back door is not completely closed. 348 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 581
replace the tires, the area displayed on the screen may change. AREA DISPLAYED ON SCREEN Image is displayed approximately level on screen. D If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally. D If the camera - 2006 Toyota Sienna | Owners Manual - Page 582
cases, it may become difficult to see the images on the screen, even when the system is functioning. Check surroundings for safety. Corners of bumper D In the dark (for example, at night) D When the temperature near the lens is high or low 350 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 583
Smear effect-A phenomenon that occurs when a bright light (for example, sunlight reflected off the vehicle body) is picked up by the camera; when transmitted by the camera, the light source appears to have a vertical streak above and below it. Rear 351 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 584
for car accessories. running. z Close the power outlet lids when the power outlets are not in use. Inserting anything other than an appropriate plug that fits the outlet, or allowing any liquid to get into the outlet may cause electrical failure or short circuits. Beside third seat 352 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 585
battery from being discharged, do not use the power outlet longer than necessary when the engine is not running switch on the instrument panel. An indicator light will illuminate to indicate that the power appliances may cause radio noise. D Appliances with 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 586
paper strip covering the adhesive on back side of loop and adhere loop to back side of the transmitter near center. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the glove box door closed while driving. 354 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 587
facing inside of box into the box. Make sure the transmitter button is located above button pins. Remove spacers from the center panel. Place one spacer on the pin that would be below transmitter button when the cover is closed. Close the cover. 355 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 588
door opener transmitter is properly installed, you can operate the transmitter by pushing the center panel of the cover. If the center panel does not contact your garage door in a piece of felt or pad to prevent the transmitter from clattering. 356 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 589
shown in the following illustrations. Type C-The plate in the center of the auxiliary box can be adjusted or removed as shown roof) D Type A-As these holders are designed for holding a light object such as an eyeglass, do not place any heavy objects in 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 590
06 SIENNA_U (L/O 0603) Type D (instrument panel with seat heater switches) Type F (front door) Type H (spare tire cover) Type E (upper side of the glove box) Type G (quarter trim) Type I (front seat side table) 358 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 591
people in the vehicle during sudden braking or in an accident. D Type A and F-To reduce the chance of injury in case of an accident or a sudden stop while driving, keep the cup holder closed when it is not in use. Type K (front passenger's seat) 359 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 592
06 SIENNA_U (L/O 0603) Type A (instrument panel) Type C (front side of the front seat side table) Type E (front side of console box) Type B (quarter trim) Type D (rear side of the front seat side table) 360 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 593
06 SIENNA_U (L/O 0603) Bottle holders Type G (console box tray) Front door Type F (rear side of console box) Sliding door 361 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 594
injure people in the vehicle during a sudden braking or an accident. NOTICE Do not put a cup or open bottle in the bottle holder because the contents may spill when the door opens or closes. This box is designed to place things like bottles. 362 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 595
To access the console box, pull up the lock release lever and raise the console box lid. Between the front seats CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the console box closed while driving. Between the second seats 363 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 596
, the right side second seat must be in the outside position. To remove the console box: Open the auxiliary box of the rear side and pull up the lock release lever to disengage the rear lock. Then lift the console box and release the front hook. 364 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 597
get your hands or feet pinched in the console box. D Make sure the console box is securely locked by pushing forward and rearward. Failure to do so may cause an unexpected accident or severe injury in the event of emergency braking or a collision. 365 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 598
back of the cup holder to secure it. Small tray-Hook the back of the small tray to the console box under- tray, then push down the front of the small tray to secure it. Make sure the cup holder and small tray are locked securely. 366 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 599
stop while driving, keep the console box upper lid closed when it is not in use. D To reduce the chance of injury in case of an accident or a sudden stop while driving, keep the cup holder and small tray stored when they are not in use. 367 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 600
use as a cup holder, open the lid and pull down the tab as shown in the illustration. To fold down the table, pull up the lock release lever and push against the driver's seat side. Make sure the table is locked securely. 368 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 601
and possibly injure people in the vehicle during sudden braking or in an accident. To use the coat airbag inflates, those items will be hurled away with great force or the curtain shield airbag may not activate correctly. When you hang clothes, hang them on the coat hook directly. 369 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 602
06 SIENNA_U (L/O 0603) Cargo net hooks Type A (instrument panel) Type C (third seats) Pattern 1 Type B (front seats) Type D (under the back door) Pattern 2 370 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 603
than the cargo net. Pattern 3 To secure your luggage, use the tiedown hooks as shown above. See "-Stowage precautions" on page 399 in Section 2 for precautions when loading luggage. CAUTION To avoid personal injury, keep the tiedown hooks folded when not in use. Pattern 4 371 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 604
2. Slide the cross rails to the desired position for loading the luggages of various sizes. 3. After adjusting, be sure to tighten the cross rails by turning knobs clockwise. Follow the manufacturer's instructions and precautions when installing the attachments or their equivalent. 372 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 605
anything on the Use a floor mat of the correct size. If the floor carpet and floor mat have two holes, then they are designed for use with two locking clips. Fix the floor mat with locking clips into the holes in the floor carpet. Quarter window 373 2006 SIENNA from March '06 Prod. (OM45443U - 2006 Toyota Sienna | Owners Manual - Page 606
06 SIENNA_U (L/O 0603) CAUTION Make sure the floor mat is properly placed on the floor carpet. If the floor mat slips and interferes with the movement of the pedals during driving, it may cause an accident. 374 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 607
...Three- way catalytic converters ...Engine exhaust cautions ...Facts about engine oil consumption ...Iridium- tipped spark plugs ...Brake system ...Brake pad wear limit indicators ...Your Toyota's identification ...Theft prevention labels ...Suspension and chassis ...Tire information ...Vehicle - 2006 Toyota Sienna | Owners Manual - Page 608
consult your Toyota dealer. However, occasionally, you may notice light knocking for a short time while accelerating or driving up hills. catalytic converter to lose its effectiveness and the emission control system to function improperly. Also, this can increase maintenance costs. 376 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 609
your Toyota dealer for service. Toyota recommends the use of gasoline that contains detergent additives to avoid build- up of engine deposits. However, all gasoline sold in the U.S. contains detergent additives to keep clean and/or clean intake systems. QUALITY GASOLINE Automotive manufacturers - 2006 Toyota Sienna | Owners Manual - Page 610
, try changing gasoline brands. If this does not rectify your problem, then consult your Toyota dealer. The fuel pump shut off system stops supplying it is the fuel system has been damaged and it is in need of repair. In this case, do not restart the engine. 378 2006 SIENNA from March '06 Prod. - 2006 Toyota Sienna | Owners Manual - Page 611
Guide" or "Owner's Manual Supplement". The three- way catalytic converter is an emission control device installed in the exhaust system. The purpose is to reduce pollutants in the exhaust gas. CAUTION D Keep people and combustible materials away from the exhaust pipe while the engine is running - 2006 Toyota Sienna | Owners Manual - Page 612
to time. If you hit something, or notice a change in the sound of the exhaust, have the system checked immediately. D If you smell exhaust fumes in the vehicle, open the windows and close the back door and quarter windows to ensure plenty of fresh air enters the vehicle. If you can smell exhaust - 2006 Toyota Sienna | Owners Manual - Page 613
quality of the oil and the conditions the vehicle is driven under. More that the oil level has not changed. The diluting ingredients evaporate out when level regularly could lead to serious engine trouble due to insufficient oil. For detailed information 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 614
. The anti- lock brake system is designed to help prevent lock- up of the wheels during a sudden braking or braking on slippery road surfaces. This assists in providing directional stability and steering performance of the vehicle under these circumstances. 382 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 615
sensors for respective wheels' turning speeds. The use of tires other than specified may fail to detect the accurate turning speed resulting in a longer stopping distance. D At the end of the anti- lock brake system activation, the brake pedal may move a little forward. 383 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 616
case the wheels could lock up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the - 2006 Toyota Sienna | Owners Manual - Page 617
the wheels could lock up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle - 2006 Toyota Sienna | Owners Manual - Page 618
brake pad wear limit indicators on your disc brakes give a warning noise when the brake pads are worn to where replacement is required. If you hear a squealing or scraping noise while driving, have the brake pads checked and replaced Label. 386 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 619
the engine block as shown. You should not attempt to remove the theft prevention labels as it may violate certain state or federal laws. 387 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 620
06 SIENNA_U (L/O 0603) Tire information- -Tire symbols (run- flat tire or standard tire) This illustration indicates typical tire symbols. 1. Tire size- For details, see "-Tire size" on page 392. 2. DOT and Tire Identification Number (TIN)- For details, see "-DOT and Tire Identification Number (TIN - 2006 Toyota Sienna | Owners Manual - Page 621
of the run- flat tire. For details, see "Run- flat tires" on page 476. 7. Radial tire or bias- ply tires- A radial tire has "RADIAL" on the sidewall. A tire not marked with "RADIAL" is a bias- ply tire. 8. "TUBELESS" or "TUBE TYPE"- A tubeless tire does not have a tube inside the tire and air is - 2006 Toyota Sienna | Owners Manual - Page 622
Number (TIN)" on page 391. 4. The location of the tread wear indicators- For details, see "Checking and replacing tires" on page 474. 5. Load limit at maximum cold tire inflation pressure- For details, see "Checking and replacing tires" on page 474. 390 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 623
typical DOT and Tire Identification Number (TIN). 1. "DOT" symbol 2. Tire Identification Number (TIN) 3. Tire manufacturer's identification mark 4. Tire size code 5. Manufacturer's optional tire type code (3 or 4 letters) 6. Manufacturing week 7. Manufacturing year 391 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 624
(L/O 0603) -Tire size -Name of each section of tire This illustration indicates typical tire size. 1. Tire use (P=Passenger car, T=Temporary use) 2. Section width (in millimeters) 3. Aspect ratio (tire height to section width) 4. Tire construction code (R=Radial, D=Diagonal) 5. Wheel diameter (in - 2006 Toyota Sienna | Owners Manual - Page 625
conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include cornering (turning) traction. 393 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 626
conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires - 2006 Toyota Sienna | Owners Manual - Page 627
of tire terminology Tire related term Accessory weight Meaning the combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio, and heater, to the extent that these items are available as - 2006 Toyota Sienna | Owners Manual - Page 628
items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim cold tire inflation pressure recommended by a manufacturer a metal support for a tire or a tire and tube assembly - 2006 Toyota Sienna | Owners Manual - Page 629
normal load on the tire Weather side Meaning the load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal a normally loaded vehicle 2 in front 2 in front, 1 in second seat 397 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 630
trailer weight (trailer weight plus its cargo weight) that your vehicle is able to tow. Cargo capacity Cargo capacity may increase or decrease depending on the size (weight) and the number of occupants. For details, see "Capacity and distribution" that follows. 398 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 631
and cargo should never exceed XXX kg or XXX lbs." on your vehicle's placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle. (3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 399 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 632
From this condition, if 3 more passengers with the combined weight of D kg (lb.) get on, the available cargo and luggage cargo and luggage load), you have to reduce the cargo and luggage on your vehicle. For details about total load capacity, see "Vehicle load limits" on page 398. 400 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 633
Center 24 kg (52 lb.) SEATING CONFIGURATION VARIATION In case of removing the second seats, it is possible to load as much cargo as the weight of the removed seats. (Cargo capacity) = (Total load capacity) - (Total weight of occupants) + (Weight of the removed second seats) 401 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 634
as this can cause dangerous handling characteristics, resulting in loss of control. D Do not use tires other than the manufacturer's designated tires, and never mix tires or wheels of the sizes different from the originally equipped tires and wheels. 402 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 635
...How to start the engine ...Tips for driving in various conditions ...All- wheel driving tips ...Winter driving tips ...Dinghy towing ...Trailer towing ...How to save fuel and make your vehicle last longer ... 3 404 404 405 406 407 408 408 413 403 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 636
, head restraint height and steering wheel angle. 3. Adjust the inside and outside rear view mirrors. 4. Lock all doors. 5. Fasten seat belts. How to start the engine- (a) Before cranking 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and accessories. 3. Put the selector lever in - 2006 Toyota Sienna | Owners Manual - Page 637
. Otherwise, the impact could cause severe damage to the tires and/or wheels. D Before driving off, make sure that the parking brake is fully released and the parking brake reminder light is off. D Do not leave your vehicle unattended while the engine is running. D Do not rest your foot on the - 2006 Toyota Sienna | Owners Manual - Page 638
tire inflation pressure" on page 471 in Section 7- 2.) D Do not use tires (including snow tires) of different brands, sizes, construction or tread patterns. (See "Checking and replacing tires" on page 474 and "Installing snow tires and chains" on page 478 in Section 7- 2.) 406 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 639
you are driving, we recommend you carry some emergency equipment. Some of the things you might put in the vehicle are tire chains, window scraper, bag of sand or salt, flares, small shovel, jumper cables, etc. NOTICE Do not use plain water alone. 407 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 640
(8700 lb.) All- wheel drive models 3992 kg (8800 lb.) Your vehicle is not designed to be dinghy towed (with four wheels on the ground) behind a motorhome. NOTICE Do not tow your vehicle with four wheels on the ground. This may cause serious damage to your vehicle. 408 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 641
the unloaded vehicle, driver, passengers, luggage, hitch and trailer tongue load. It also includes the weight of any special equipment installed on your vehicle. D The trailer cargo load should be distributed so ) listed on the Certification Label. 409 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 642
- mounted hitches as they can cause damage to the axle housing, wheel bearings, wheels or tires. Also, never install a hitch which may interfere with the normal function of an Energy Absorbing Bumper, if so equipped. BRAKES AND SAFETY CHAINS D Use only a hitch recommended by the hitch manufacturer - 2006 Toyota Sienna | Owners Manual - Page 643
scheduled maintenance information in the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". D The trailer tires should be inflated to the pressure recommended by the trailer manufacturer in respect to the total trailer weight. TRAILER LIGHTS D Retighten all fixing bolts of the towing - 2006 Toyota Sienna | Owners Manual - Page 644
, immediately turn off the air conditioning (if in use), pull wheels to the inside of the turn. Therefore, compensate for this by making a larger than normal turning radius with your vehicle. D In order to maintain engine braking efficiency, do not place the transmission in "D". 412 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 645
engine braking is not required. Driving with the selector lever in "4" will reduce the fuel economy. (For details, see "Automatic transmission" on page 199 in Section 1- 7.) D Accelerate slowly and smoothly. Avoid jackrabbit starts. Get into high gear as quickly as possible. 413 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 646
alignment not only causes faster tire wear but also puts an extra load on the engine, which, in turn, wastes fuel. CAUTION Never turn off the engine to coast down hills. Your power steering and brake booster will not function without the engine running. Also, the emission control system operates - 2006 Toyota Sienna | Owners Manual - Page 647
increase engine speed ...If your vehicle overheats ...If you have a flat tire ...If your vehicle becomes stuck ...If your vehicle needs to be automatic transmission selector lever ...If you cannot operate back door opener ... 4 416 419 419 420 421 436 437 439 439 439 440 415 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 648
checks, make sure you have followed the correct starting procedure given in "How to start the engine" on page the battery is discharged. You may try jump starting. See "(c) Jump starting" on page 417 for further instructions. If the light systems. 416 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 649
service. D The gas normally produced by a battery will explode if a flame or spark is brought near. Use only standardized jumper cables and do not smoke or light a match while jump starting. JUMP STARTING PROCEDURE 1. If the booster battery get acid 417 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 650
part that moves when the engine is cranked. CAUTION When making the connections, to avoid serious injury, do not lean over the battery or accidentally let the jumper cables or clamps touch anything except the correct battery terminals or the ground. 418 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 651
is turned to "ACC" or "LOCK" position. CAUTION If the engine is not running, the power assist for the brakes and steering will not work so steering and braking will be much harder than usual. CAUTION Be especially careful to prevent erroneous pedal operation. 419 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 652
hear a loud knocking or pinging noise, the engine has probably overheated. You should follow this procedure...1. Pull safely off the road, stop the vehicle and turn on your emergency flashers. Put the transmission in "P" and apply the parking brake. Turn off the air conditioning if it is being used - 2006 Toyota Sienna | Owners Manual - Page 653
on any other vehicle. D Do not use more than one compact spare tire at the same time. D The pressure for the compact spare tire must be 420 kPa (4.2 kgf/cm2 or bar, 60 psi). D Do not exceed 80 km/h (50 mph) when driving with the compact spare tire. 421 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 654
is not provided on vehicles with run- flat tires. NOTICE Your ground clearance is reduced when the compact spare tire is installed so avoid driving over obstacles and drive slowly on rough, unpaved roads and speed bumps. Also, do not attempt to go through an automatic car wash as the vehicle may - 2006 Toyota Sienna | Owners Manual - Page 655
. The wheels, tires, body, suspension and other components could be damaged. z Your ground clearance is reduced if the run- flat tire goes flat, so avoid driving over obstacles and drive slowly on rough, unpaved roads and speed bumps. Also, do not attempt to go through an automatic car wash as - 2006 Toyota Sienna | Owners Manual - Page 656
tools and their storage locations. A spare tire is not provided on vehicles with run- flat tires. To remove the tools, turn the knob counterclockwise and remove the cover. To remove the jack, turn the jack joint by hand until the jack becomes free. 424 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 657
and the right side second seat to the rear- most lock position so they will not interfere with the wheel nut wrench. Open the right side sliding door and you will find the flap on the floor. Pull back the flap to find the spare tire clamp bolt. 425 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 658
secure the tire, taking care that the tire goes straight up without catching on any other part, to prevent it from flying forward during a collision or sudden braking. As the tire carrier is designed for the compact spare tire, the standard tire cannot be stored there. 426 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 659
tools and their storage locations. A spare tire is not provided on vehicles with run- flat tires. To remove the tools, turn the knob counterclockwise and remove the cover. To remove the jack, turn the jack joint by hand until the jack becomes free. 427 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 660
the wheel nut wrench, make sure the wrench is securely held. To 1. 2. 3. 4. remove the spare tire: Remove the lid. Loosen the nut and remove it. Remove the spare tire cover. Loosen the bolt, then remove the bolt and spacer. Then take the spare tire out of the vehicle. 428 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 661
one of the rear wheels. 3. Remove the wheel ornament. Pry off the wheel ornament, using the beveled end of the wheel nut wrench as shown. CAUTION Do not try to pull off the ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. 429 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 662
Do not start or run the engine while your vehicle is supported by the jack. D Stop the vehicle on a level firm ground, firmly set the parking brake and put the transmission in "P". Block the wheel diagonally opposite to the one being changed if necessary. 4. Loosen all the wheel nuts. Always loosen - 2006 Toyota Sienna | Owners Manual - Page 663
wheel changing. D Do not raise the vehicle with someone in the vehicle. D When raising the vehicle, do not place any objects on top of or underneath the jack. D Raise the vehicle only high enough to remove and change the tire. D When jacking up the vehicle, turn off the power sliding door system - 2006 Toyota Sienna | Owners Manual - Page 664
change tires. Lift the flat tire straight off and put it aside. Roll the spare wheel into position and align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts. 432 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 665
loosen and eventually cause a wheel to come off while driving. 8. Reinstall all the wheel nuts finger tight. Reinstall the wheel nuts (tapered end inward) and tighten them as much as you can by hand. Press back on the tire and see if you can tighten them more. 433 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 666
1. Put the wheel ornament into position. Align the cutout of the wheel ornament with the valve stem as shown. 2. Press hand firmly on one side of wheel ornament and then firmly tap the other side around the edge of wheel ornament with the heel of your hand to snap into place. 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 667
spare tire, the standard tire cannot be stored there. As soon after changing wheels as possible, tighten the wheel nuts to the torque specified on page 501 in Section 8 with a torque wrench. Have a technician repair the flat tire and replace the spare tire with it. 435 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 668
you have rotated your tires. See "Tire pressure warning system" on page 208 in Section 1- 7. CAUTION Before driving, make sure all the tools, jack and flat tire are securely in place in their storage location to reduce the possibility of personal injury during a collision or sudden braking. If your - 2006 Toyota Sienna | Owners Manual - Page 669
to your vehicle, make sure the following precautions are observed. If necessary, show this page to the tow truck driver. -From rear -From rear (b) Using flat bed truck (b) Using flat bed truck Two- wheel drive models All- wheel drive models 437 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 670
bumper and/or underbody of the towed vehicle will be damaged during towing. From rear-Use a towing dolly under the front wheels. All models- (c) Towing with sling type truck NOTICE Do not tow with sling type truck, either from the front or rear. This may cause body damage. 438 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 671
to other positions even though the brake pedal is depressed, use the shift lock override button as follows: 1. Turn the ignition key to position. Make sure the brake is applied. "LOCK" parking 2. Pry up the cover with a flathead screwdriver or equivalent. 439 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 672
the following procedure. 1. Remove the cover on the back door trim. Without power back door system 6. Start the engine. For your safety, keep the brake pedal depressed. Be sure to have the system checked by your Toyota dealer as soon as possible. With power back door system 440 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 673
06 SIENNA_U (L/O 0603) 2. Pull the lever with the back door motor, open the back door. Be sure to have the back door opener checked/repaired by your Toyota dealer. 441 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 674
06 SIENNA_U (L/O 0603) 442 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 675
06 SIENNA_U (L/O 0603) SECTION CORROSION PREVENTION AND APPEARANCE CARE Corrosion prevention and appearance care 5 Protecting your Toyota from corrosion ...444 Washing and waxing your Toyota ...445 Cleaning the interior ...447 443 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 676
available, pressure water or steam is effective for cleaning the vehicle's underside and wheel condition of your vehicle's paint and trim. conditions: D Road salt or dust control chemicals will accelerate corrosion, as will the presence of salt in the air 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 677
: Do not apply water (highpressure car wash, for example) at or near the fuel tank inlet with the fuel filler door opened. If the water enters the air vent, you may experience trouble with refueling or rough engine idling. Plastic wheel ornaments: The plastic wheel ornaments are damaged easily by - 2006 Toyota Sienna | Owners Manual - Page 678
. NOTICE z With mast type antenna: To prevent damage to the antenna, make sure it is removed before driving your Toyota through an automatic car wash. z When your vehicle goes through an automatic car wash, make sure the power sliding door and power back door system are off. Waxing your Toyota - 2006 Toyota Sienna | Owners Manual - Page 679
or exterior. Water may get into audio components or other electrical components above or under the floor carpet (or mat) and cause a malfunction; and it may cause body corrosion. NOTICE Do not use solvent, thinner, gasoline or window cleaner on the interior. 447 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 680
or damage the printed antenna. Air conditioning control panel, audio panel, instrument panel, console panel, and switches Use a soft damp cloth for cleaning. Soak a clean soft cloth in water or lukewarm water then lightly wipe off dirt. NOTICE z Do not use dye or bleach on the belts-it may weaken - 2006 Toyota Sienna | Owners Manual - Page 681
leather as these could cause discoloring. z Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather. 449 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 682
06 SIENNA_U (L/O 0603) 450 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 683
maintenance ...Does your vehicle need repairing? ...Emissions Inspection and Maintenance (I/M) programs ... 6 452 453 455 456 For scheduled maintenance information, please refer to the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". 451 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 684
those required to be serviced at regular intervals. For details of your maintenance schedule, read the "Scheduled Maintenance Guide" or "Owner's Manual Supplement". It is recommended that any replacement parts used for maintenance or for the repair of the emission control system be Toyota supplied - 2006 Toyota Sienna | Owners Manual - Page 685
ventilation if you run the engine. IN THE ENGINE COMPARTMENT Items listed below should be checked from time to time, e.g. each time when refueling. Washer fluid Make sure there is sufficient fluid in the tank. See page 487 in Section 7- 3 for additional information. 453 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 686
, and other lights are all working. Check headlight aim. Service reminder indicators and warning buzzers Check that all service reminder indicators and warning buzzers function properly. Steering wheel Be alert for changes in steering condition, such as hard steering or strange noise. Seats Check - 2006 Toyota Sienna | Owners Manual - Page 687
injury. D Change in exhaust sound (This may D Flat- looking tire; excessive tire squeal when cornering; uneven tire wear D Vehicle pulls to one side when driving straight on a level road D Strange noises related to suspension movement D Loss of brake effectiveness; spongy feeling brake pedal - 2006 Toyota Sienna | Owners Manual - Page 688
or run down, the codes are erased. Also, depending on your driving habits, the codes may not be completely set. Also, if the malfunction indicator lamp had come on recently due to temporary malfunction such as a loose fuel tank cap, your vehicle may not pass the I/M test. 456 2006 SIENNA from - 2006 Toyota Sienna | Owners Manual - Page 689
06 SIENNA_U (L/O 0603) SECTION DO- IT- YOURSELF MAINTENANCE Introduction 7- 1 458 459 460 461 463 Engine compartment overview ...Fuse locations ...Do- it- yourself service precautions ...Positioning the jack ...Parts and tools ... 457 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 690
fluid reservoir 2. Windshield and rear window washer fluid tank 3. Engine oil level dipstick 4. Engine coolant reservoir 5. Engine oil filler cap 6. Brake fluid reservoir 7. Fuse block 8. Battery 9. Electric cooling fans 10. Condenser 11. Radiator 458 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 691
06 SIENNA_U (L/O 0603) Fuse locations Spare fuses Spare fuses 459 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 692
other solid supports. D Dispose of used oil and filter only in a safe and acceptable manner. Do not dispose of used oil and filter in household trash, in sewers or onto the ground. Call your dealer or a service station for information concerning recycling or disposal. 460 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 693
noise. z Do not reuse iridium- tipped spark plugs by cleaning or regapping. z Do not overfill automatic transmission fluid, or the transmission could be damaged. z Do not drive with the air cleaner filter battery and ignition cables wheel drive models) 461 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 694
the jack. D Follow jacking instructions. D Do not put any part of your body under the vehicle supported by the jack. Personal injury may occur. NOTICE Make sure to place the jack correctly, or your vehicle may be damaged. D Do not start or run the engine while Rear (all- wheel drive models) your - 2006 Toyota Sienna | Owners Manual - Page 695
D Automatic Tools: transmission DEXRON®II or III D Bulb with same number and wattage rating as original (See charts in "Replacing light bulbs" on page 488 in Section 7- 3.) Tools: Parts (if level is low): D Rag or paper towel D Funnel (only for adding fluid) CHECKING BATTERY CONDITION Tools - 2006 Toyota Sienna | Owners Manual - Page 696
06 SIENNA_U (L/O 0603) 464 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 697
and condenser ...Checking brake fluid ...Checking power steering fluid ...Checking tire inflation pressure ...Checking and replacing tires ...Rotating tires ...Run- flat tires ...Installing snow tires and chains ...Replacing wheels ...Aluminum wheel precautions ... 465 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 698
of the engine. 2. Pull the dipstick out, hold a rag under the end and wipe it clean. 3. Reinsert the dipstick-push it in as far as see "Service specifications" on page 498 in Section 8. When the level reaches within the correct range, install the filler cap hand- tight. 466 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 699
30 If SAE 5W- 30 is not available, SAE 10W- 30 may be used. However, it should be replaced with SAE 5W- 30 at the next oil change. Oil identification mark The ILSAC (International choice for good fuel economy and good starting in cold weather. 467 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 700
for your engine, "Toyota Genuine Motor Oil" is available, which has been specifically tested and approved for all cap pressure and check for leaks in the cooling system. Coolant type selection Use of improper coolants may damage your engine cooling system. 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 701
condition, take your vehicle to a Toyota dealer. Checking brake coolant system with proper brake fluid level to go down slightly as the brake pads wear. So be sure to keep the reservoir filled. If the reservoir needs frequent refilling, it may indicate a serious mechanical problem. 469 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 702
only newly opened brake fluid. Once opened, brake fluid absorbs moisture from the air, and excess moisture can cause a dangerous loss of braking. When the brake fluid must be replaced, contact your if the engine has not been run for about five hours. 470 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 703
. After replacing the reservoir cap, visually check the steering box case, vane pump and hose connections for leaks or damage. Keep your tire inflation pressures at the proper level. The recommended cold tire inflation pressures, tire sizes and the combined weight of occupants and cargo (vehicle - 2006 Toyota Sienna | Owners Manual - Page 704
using the graduations of the gauge. 4. In case the tire inflation pressure is not within the prescribed range, insert the compressed air from the valve. In case of applying too much air, press the center of the valve and release the air to adjust. 472 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 705
sealing of the tire bead D Wheel deformation and/or tire separation D A greater possibility of tire damage from road hazards High tire pressure (overinflation)- D Poor handling D Excessive wear D Uneven wear D A greater possibility of tire damage from road hazards 473 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 706
, or bulges indicating internal damage, the tire should be replaced. If a tire often goes flat or cannot be properly repaired due to the size or location of a cut or other damage, it should be replaced. If you are not sure, consult with your Toyota dealer. If air loss occurs while driving, do not - 2006 Toyota Sienna | Owners Manual - Page 707
occasionally. When replacing a tubeless tire, the air valve should also be replaced with a new one. Initial adjustment of the tire pressure warning system is necessary after you have rotated your tires. See "Tire pressure warning system" on page 208 in Section 1- 7. 475 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 708
road surface conditions. See "If you have a flat tire" on page 421 in Section 4 for tire change procedure. 476 Initial adjustment of the tire pressure warning system is necessary after you have rotated your tires. See "Tire pressure warning system" on page 208 in Section 1- 7. Run- flat tires Some - 2006 Toyota Sienna | Owners Manual - Page 709
"Tire pressure warning system" on page 208 in Section 1- 7 and "Checking tire inflation pressure" on page 471 in this Section. CAUTION As the run- flat tire allows you to continue driving if any tire goes flat, the tire performance is not the same as normal condition. If the run- flat tire goes flat - 2006 Toyota Sienna | Owners Manual - Page 710
. The wheels, tires, body, suspension and other components could be damaged. z Your ground clearance is reduced if the run- flat tire goes flat so avoid driving over obstacles and drive slowly on rough, unpaved roads and speed bumps. Also, do not attempt to go through an automatic car wash as - 2006 Toyota Sienna | Owners Manual - Page 711
. D Never drive over 120 km/h (75 mph) with any type of snow tires. D Vehicles with run- flat tires-Do not replace or repair the tire by yourself. When the tires must be replaced or repaired, consult your Toyota dealer or authorized tire dealer. 479 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 712
on compact spare tires, too. Correct replacement wheels are available at your Toyota dealer. A wheel of a different size or type may adversely affect handling, wheel and bearing life, brake cooling, speedometer/odometer calibration, stopping ability, headlight aim, bumper height, vehicle ground - 2006 Toyota Sienna | Owners Manual - Page 713
(L/O 0603) Initial adjustment of the tire pressure warning system is necessary after you have replaced your wheels. See "Tire pressure warning system" on page 208 in Section 1- 7. Aluminum wheel precautions D When installing aluminum wheels, check that the wheel nuts are tight after driving your - 2006 Toyota Sienna | Owners Manual - Page 714
06 SIENNA_U (L/O 0603) 482 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 715
SIENNA_U (L/O 0603) SECTION DO- IT- YOURSELF MAINTENANCE Electrical components 7- 3 484 485 486 487 488 Checking battery condition ...Battery recharging precautions ...Checking and replacing fuses ...Adding washer fluid ...Replacing light bulbs ... 483 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 716
Ground cable D If electrolyte gets on your clothes, there is a through to ly take off follow the essary. possibility of its soaking your skin, so immediatethe exposed clothing and procedure above, if necHold- down clamp D Do not cause a spark from the battery with tools. D Do not smoke or light - 2006 Toyota Sienna | Owners Manual - Page 717
reconnect, replace or recharge the battery. In any of these cases, you should normalize each system. To normalize them, see "Power sliding doors" on page 28, "Power back door" on page 37, "Power windows" on page 42 and "Electric moon roof" on page 52 in Section 1- 2. Check the battery condition by - 2006 Toyota Sienna | Owners Manual - Page 718
be causing the problem. The lid of the fuse box shows the name of the circuit for each fuse. See page 501 in Section 8 for the functions controlled by each circuit. Good Type B Blown Type D Type C and D-When any of the fuses are blown, contact your Toyota dealer. 486 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 719
. If the new fuse immediately blows out, there is a problem with the electrical system. Have your Toyota dealer correct it as soon as possible. You should normalize the power window, power sliding door, power back door and moon roof if they do not operate automatically or the jam protection - 2006 Toyota Sienna | Owners Manual - Page 720
Toyota dealer for headlight repair or servicing, including replacement of bulbs and bulb disposal. NOTICE Only use a bulb of the listed type. D When replacing the rear light bulbs, turn off the power back door system to prevent an unexpected serious injury. 488 2006 SIENNA from March '06 Prod - 2006 Toyota Sienna | Owners Manual - Page 721
35 55 60 51 27 5 21 21/5 3.8 18 5 4.9 4.9 5 3 3.8 Type A B C B E E D D D D D F F G G F A: B: C: D: E: F: G: D2R discharge bulbs HB4 halogen bulbs HB3 halogen bulbs Wedge base bulbs (clear) Wedge base bulbs (amber) Single end bulbs Double end bulbs 489 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 722
while depressing the lock release. If the connector is tight, wiggle it. 3. Plug in a new bulb into the connector and install it into the mounting hole. Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact your Toyota dealer. 490 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 723
either the left or right front fog light bulbs burns out, contact your Toyota dealer. -Front turn signal lights -Parking and front side marker lights NOTICE Do not try to replace the front fog light bulbs by yourself. You may damage the vehicle. 491 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 724
rear side marker lights -Tail and back- up lights Remove the bolts. Remove the unit by pry the unit by using the flathead screwdriver with cloth. Remove the strap with a Phillips- head screwdriver. a: Rear turn signal light b: Stop/tail and rear side marker light 492 2006 SIENNA from March '06 - 2006 Toyota Sienna | Owners Manual - Page 725
06 SIENNA_U (L/O 0603) -License plate lights NOTICE When installing the back door trim, be careful not to jam any wire harness and connector. Otherwise, they may be damaged. Remove the strap with a Phillips- head screwdriver. a: Tail light b: Back- up light 493 2006 SIENNA from March '06 Prod. - 2006 Toyota Sienna | Owners Manual - Page 726
06 SIENNA_U (L/O 0603) NOTICE When installing the back door trim, be careful not to jam any wire harness and connector. Otherwise, they may be damaged. 494 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 727
06 SIENNA_U (L/O 0603) SECTION SPECIFICATIONS Specifications Dimensions and weights ...Total load capacity ...Engine ...Fuel ...Service specifications ...Tires ...Fuses ... 8 496 497 498 498 498 501 501 495 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 728
+ cargo weight) ∗1 : ∗2 : ∗3 : mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) mm (in.) 5105 (201.0) 1965 1750 (77.4) (68.9)∗1 3030 (119.3) 1665 1675 1700 1710 (65.6)∗2 (65.9)∗3 (66.9)∗2 (67.3)∗3 kg (lb.) 1587 (3500) Unladen vehicle With P215/65R16 tires With P225/60R17 tires 496 2006 SIENNA - 2006 Toyota Sienna | Owners Manual - Page 729
grade 7- passengers models 8- passengers models 7- passengers models 8- passengers models 550 570 565 550 (1210) (1250) (1250) (1215)∗ 550 (1220) 535 (1185)∗ 500 (1100) 495 (1095) 480 (1060)∗ 800 (1760) 497 XLE or Limited grade 7- passengers models With moon roof 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 730
. qt.): With filter 4.7 (5.0, 4.1) Without filter 4.5 (4.8, 4.0) "Toyota Genuine Motor Oil" is used in your Toyota vehicle. Use Toyota approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil 498 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 731
one of the Special Operating Conditions listed in your "Scheduled Maintenance Guide" or "Owner's Manual Supplement". When changing the automatic transmission fluid, use only "Toyota is removed with all the lights turned off Charging rates: 5 A max. 499 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 732
(0.04) Parking brake adjustment when depressed with the force of 294 N (30 kgf, 66 lbf): 3-5 clicks Fluid type: SAE J1703 or FMVSS No.116 DOT 3 STEERING Wheel free play: Less than 30 mm (1.2 in.) Power steering fluid type: Automatic transmission fluid DEXRONr II or III 500 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 733
·m, ft·lbf): 103 (10.5, 76) NOTE: For a complete information on tires (e.g. replacing tires or replacing wheels), see "Checking tire inflation pressure" through "Aluminum wheel precautions", pages 471 through 481, in Section 7- 2. Engine compartment 501 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 734
Power sliding door, air conditioning system, power windows, multiplex communication system, meter and gauge, wireless remote control system 15. RAD NO. 1 20 A: Audio system, rear seat entertainment system 16. SPARE 15 A: Spare fuse Instrument panel (driver's side) Instrument panel (passenger's side - 2006 Toyota Sienna | Owners Manual - Page 735
A: Multiport fuel injection system/sequential multiport fuel injection system 51. A/C 7.5 A: Manual air conditioning system Fuses (type B) 52. MAIN 30 A: Headlights, daytime running light system, "H- LP RL" and "HLP LL" fuses 53. AM2 30 A: "INJ", "IGN" and "GAUGE2" fuses 503 2006 SIENNA from March - 2006 Toyota Sienna | Owners Manual - Page 736
A: Left side power sliding door 64. RR A/C 40 A: Rear air conditioning system 65. DEF 40 A: Rear "MIR HTR" fuse window defogger, Fuse (type D) 69. ALT 140 A: Charging system, "RR A/C", "HTR", "FAN", "PBD", "R- PSD", "L- PSD" and "DEF" fuses 66. ABS1 50 A: Anti- lock brake system, traction control - 2006 Toyota Sienna | Owners Manual - Page 737
06 SIENNA_U (L/O 0603) SECTION Reporting safety defects for U.S. owners 9 REPORTING SAFETY DEFECTS FOR U.S. OWNERS Reporting safety defects for U.S. owners ...506 505 2006 SIENNA from March '06 Prod. (OM45443U) - 2006 Toyota Sienna | Owners Manual - Page 738
either call the Auto Safety Hotline toll- free at 1- 888- 327- 4236 (or 366- 0123 in Washington, D.C. area) or write to: NHTSA, U.S. Department of Transportation, Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from the Hotline. 506 2006 SIENNA from March