2010 Volvo V70 Owner's Manual - Page 210
2010 Volvo V70 Manual
Page 210 highlights
05 During your trip Emergency towing Towing eyelet on the right sides of either the front or rear bumper (see illustration). Screw the towing eyelet in place, first by hand and then using the tire iron until it is securely in place. After the vehicle has been towed, the eyelet should be removed and returned to its storage location. Press the cover for the attachment point back into position. CAUTION If the vehicle is being towed on a flat bed truck, the towing eyelets must not be used to pull the vehicle up onto the flat bed. NOTE On certain models equipped with a trailer hitch, the towing eyelet cannot be screwed into the hole in the rear bumper. The towing rope should be attached to the trailer hitch instead. For this reason, the detachable section of the trailer hitch should be safely stowed in the vehicle at all times. WARNING G017464 • Location of the towing eyelet 05 Remember that the power brakes and power steering will not function when engine is not running. The braking and steering systems will function but considerably higher pressure will be required on the brake pedal and greater steering effort must be exerted. The towing eyelets must not be used for pulling the vehicle out of a ditch or for any similar purpose involving severe strain. Do not use the towing eyelets to pull the vehicle up onto a flat bed tow truck. Attaching the towing eyelet V70 G021501 • Press the marked edge of the cover in the bumper and release it. Fold away the cover and screw the towing eyelet in place, first by hand and then using the tire iron until it is securely in place. Attaching the towing eyelet The towing eyelet is located under the floor of the cargo area, with the spare tire. This eyelet must be screwed into the positions provided XC70 Use a coin to pry open the lower edge of the cover. 210