2010 Volvo V70 Owner's Manual - Page 257

06 Maintenance and specifications Wheels and tires upper and lower eyelids. Get medical attention if symptoms occur. Temporarily repairing a flat tire is done in two stages: • Inhalation: Move the person to fresh air. If irritation persists, get medical attention. • Stage 1: The hole is sealed by pumping sealing compound into the tire. The car is then driven a short distance to distribute the sealing compound in the tire. 2. Peel off the speed limit sticker and affix it to the steering wheel hub where it will be clearly visible to the driver. 3. Ensure that the on/off switch is in position 0 (the 0 side of the switch should be pressed down). Tire sealing system-temporarily repairing a flat tire NOTE Do not remove any foreign objects (nails, etc.) from the tire before using the sealing system. WARNING Contact with the sealing compound may cause skin irritation. If contact occurs, wash the affected area immediately with soap and water. • Stage 2: The tire's inflation pressure is checked and adjusted if necessary. WARNING 4. Unscrew the orange cover over the bottle holder and unscrew the cap on the bottle of sealing compound. Never leave the tire sealing system unattended when it is operating. Keep the tire sealing system away from children. Be sure the vehicle is parked safely off the road and away from moving traffic. Apply the parking brake. NOTE Do not break the seal on the bottle. This occurs automatically when the bottle is screwed into the holder. 06 5. Screw the bottle into the bottle holder. Stage 1: Sealing the hole G014338 1. Open the cover on the tire sealing kit. `` 257