3Com 3CR858-91 User Guide - Page 31
PPPoE Mode, text box. If your ISP - password
UPC - 662705490946
View all 3Com 3CR858-91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
PPPoE Mode Figure 15 PPPoE Interface Screen Accessing the Wizard 31 To setup the Router for use with a PPP over Ethernet (PPPoE) connection, do the following: 1 Enter your PPP over Ethernet user name in the User Name text box. 2 Enter your PPP over Ethernet password in the Password text box and enter it again in the Retype Password text box. 3 If required, enter your PPP over Ethernet service name in the Service Name text box. This is optional. Not all ISPs require a PPPoE service name. Do not enter anything in this box if your ISP does not require a service name. 4 Enter the MTU value supplied by your ISP in the MTU text box. If your ISP has not supplied an MTU value, leave this at the default value. The default is 1454. 5 Check all of your settings, and then click Next. The DNS screen displays Refer to "DNS" on page page 35.