3Com 3CRWDR200A-75 User Guide - Page 17
Four 10/100 LAN ports - problems
View all 3Com 3CRWDR200A-75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Rear Panel 17 Only use the power adapter supplied with this Router. Do not use any other adapter. 10 Power Adapter OK LED Green Indicates that the power adapter is supplying power to the Router. If the LED is off, there may be a problem with the power adapter or adapter cable. 11 Reset Button Press this button to reset your Router to factory default. 12 Four 10/100 LAN ports Using suitable RJ-45 cable, you can connect your Router to a computer, or to any other piece of equipment that has an Ethernet connection (for example, a hub or a switch). The LAN ports will automatically set themselves to MDI or MDIX depending on the device to which they are connected and the type of cable used. Downloaded from www.Manualslib.com manuals search engine
Rear Panel
17
Only use the power adapter supplied with this Router. Do not use any
other adapter.
10
Power Adapter OK LED
Green
Indicates that the power adapter is supplying power to the Router. If the
LED is off, there may be a problem with the power adapter or adapter
cable.
11
Reset Button
Press this button to reset your Router to factory default.
12
Four 10/100 LAN ports
Using suitable RJ-45 cable, you can connect your Router to a computer,
or to any other piece of equipment that has an Ethernet connection (for
example, a hub or a switch). The LAN ports will automatically set
themselves to MDI or MDIX depending on the device to which they are
connected and the type of cable used.
Downloaded from
www.Manualslib.com
manuals search engine