3Com 3CRWE41196 User Guide - Page 35
Manually setting the IP address, DHCP Server, The Access Point acts as a DHCP Server
View all 3Com 3CRWE41196 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
LAN Settings 35 Manually setting the IP address 3Com recommends that you assign your Access Point a static IP address. 1 Select Unit Configuration and then select Static IP Address (to be specified manually). The screen shown in Figure 23 is displayed. Figure 23 Unit Configuration Screen For Static IP Address 2 Enter the Access Point IP Address and Subnet Mask in the LAN Settings field. The default static IP address of the Access Point is 192.168.1.1. 3 If you want to use the Access Point as a DHCP Server, click in the Enable check box. See "DHCP Server" for more information about configuring the DHCP server. 4 Check all of your settings, and then click Apply. DHCP Server The DHCP server will give out addresses to both wired and wireless clients. Before enabling the DHCP Server, ensure that there are no other DHCP servers running on your network. If you want the Access Point to function as a DHCP server on your network, carry out the following: 1 Select Unit Configuration and then select Static IP Address (to be specified manually). The screen shown in Figure 23 is displayed. 2 Enter the IP address details as described in "Manually setting the IP address" and click Enable against The Access Point acts as a DHCP Server. The screen shown in Figure 24.