3M 11-81336-225 User Guide - Page 13

3M™ MicroTouch™ Display M1500SS User Guide 13 Figure 3 Disassembling the Yoke & Base for Arm Mounting Step 1 -- Unlock the yoke. With the unit laying face down safely and securely on a nonabrasive surface, remove the two screws connecting the top of the yoke. Lift yoke and pull down to disengage tabs to remove. Step 2 -- Remove the bottom two screws holding the hinge cover in place. Remove the small hinge cover. Step 3 -- Remove the inner four screws holding the base to the display and gently remove the base. Countertop Base Mounting Option Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or countertop. Use standard screws in the desktop or countertop and then slide the base plate on for a secure fit. Note: A full size template has been included in the back of this manual for your convenience. Simply tear out the template and drill directly through the holes indicated to secure your display to any surface. Figure 4 Keyhole Mounting Slots Document #19-258 3M Touch Systems, Inc. Proprietary Information Rev AG