3M 11-81336-225 User Guide - Page 18
Connecting the Display
![]() |
UPC - 051128770979
View all 3M 11-81336-225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 3M™ MicroTouch™ Display M1500SS User Guide Connecting the Display CAUTION You are cautioned that any change or modification to the equipment not expressly approved by the party responsible for compliance could void your authority to operate such equipment. To connect the M1500SS Display: 1. Turn off your computer. You should always turn off the computer before connecting or disconnecting any device. 2. Connect one end of the video cable to the video connector on the display. Connect the other end to the video card in your computer. 3. Connect one end of the touch sensor cable (either serial or USB) to the display. Connect the other end to an available port on the back of your computer. If you are using a USB connection, make sure you have installed the Touch Software drivers prior to connecting the touch sensor cable. 4. Plug the AC/DC power supply into the M1500SS Display. Be sure to use the power supply included with the display. Figure 9 Identifying Your Display Connections Touch Sensor Microphone out Power Line In Video Connection WARNING To avoid the risk of electric shock which could result in serious injury or death: This device must be operated with the original power supply, part numbers • HJC - HASU05F • AC Adapter - STD1203 • Li Shin - LSE9901B1250 • CHI -- CH-1234. 3M Touch Systems, Inc. Proprietary Information
![](/manual_guide/products/3m-1181336225-user-guide-b4f20d1/18.png)