3M 11-81336-225 User Guide - Page 15

3M™ MicroTouch™ Display M1500SS User Guide 15 Note: When the adjustment knob is horizontal it is locked; when it is in the vertical position it is unlocked. Always maintain adequate ventilation to protect the display from overheating and to ensure reliable and continued operation. Installing the Video Card and Video Driver Before you can connect your touch display, make sure your computer has a video card and driver already installed for the display. The video driver is supplied by the video card manufacturer and may be found on the disks that came with your computer. If you need information on installing a video card or video driver, refer to your computer documentation for instructions. Supported Video Display Modes and Refresh Rates Your video card should support one of the display modes specified in Table 1. If you select an unsupported video mode, the display may stop working or display unsatisfactory picture quality. Table 1. Applicable Display Mode and Refresh Rate Display Mode VGA (640 x 480) US Text (720 x 400) SVGA (800 x 600) XGA (1024 x 768) Refresh Rate 60 72 75 70 56 Hz 60 72 75 60 70 75 Configuring the Display Settings After you connect your M1500SS Display and turn on your computer, you may need to configure one or more of these display settings. The ideal settings for this display are as follows: • Display mode (also called desktop area or video resolution) 1024 x 768 • Refresh rate (also called vertical scan rate or vertical sync) 60 Hz • Color depth (also called color palette or number of colors) at least 16-bit (high color) Document #19-258 3M Touch Systems, Inc. Proprietary Information Rev AG