3M 11-81336-225 User Guide - Page 14

14 3M™ MicroTouch™ Display M1500SS User Guide Access to the Video Controls The controls for adjusting the video display are located on the front of the M1500SS Display. These buttons let you display the on-screen menu and adjust the phase, image position, contrast, and brightness. Make sure you have unobstructed access to the video controls once the M1500SS Display is installed. Refer to Chapter 3 for more details on these controls. Figure 5 Video Display Controls MENU Microphone Ż/Left SELECT Ź/Right LED Adjusting the Viewing Angle The yoke and spine were designed with touch stability in mind. This innovative design keeps the display face stable during touch. The unit can be adjusted to any locked position from 0 up to 60 degrees from vertical. This allows for users of different heights to view the display at the angle that best suits them with no degradation in touch stability. Turn the positive locking mechanism adjustment knob one quarter turn (horizontal to vertical) to loosen. Adjust the M1500SS Display by pushing on the top front of the display until the screen is at the best viewing angle for you. Then turn the adjustment knob a 1/4 turn back to lock in place. To raise the display back to vertical, unlock the adjustment knob, lift slightly on the adjustment knob and pull up. Figure 6 Viewing Angle Adjustable from 0 up to 60 degrees 3M Touch Systems, Inc. Proprietary Information