3M MP7750 Operation Guide - Page 14

TURNING ON THE POWER Precautions Connect all devices to be used to the projector prior to turning on the power.  ʙ  WARNING When the power is ON, a strong light is emitted. Do not look into the lens. VIDEO STANDBY/ON RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE KEYSTONE Control panel LANP TENP POWER STANDBY/ON INPUT KEYSTONE RESET 1 Make sure that the power cord is firmly and correctly connected to the projector and outlet  2 Turn on the projector's power Set the power switch to [ | ] (ON). The projector will go to STANDBY mode and the POWER indicator will light to solid orange. power switch POWER indicator KEYSTONE RESET POWERTENPLANP STANDBY/ON INPUT KEYSTONE RESET POWERTENPLANP NOTE Turn the power on/off in right order. • Power on the projector before the computer or video tape recorder. • Power off the projector after the computer or video tape recorder. 14 3 Press the STANDBY/ON button (control panel or remote control) • The projector begins warming up and the POWER indicator blinks green. • The POWER indicator stops blinking STANDBY/ON and lights to solid green once the projector's power is completely on. 4 Remove the lens cap The picture is projected.