3M MP7750 Operation Guide - Page 9

ENGLISH Ports and Cables Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare. Function RGB input RGB output USB mouse control PS/2 mouse control ADB mouse control Serial mouse control RS-232C communication S-video input Video input Component video input Audio input Projector Port RGB IN 1 RGB IN 2 RGB OUT USB CONTROL S-VIDEO IN VIDEO IN COMPONENT VIDEO Y COMPONENT VIDEO CB/PB COMPONENT VIDEO CR/PR AUDIO IN L AUDIO IN R Connection Cables RGB cable with D-sub 15-pin shrink jack and inch thread screws USB cable PS/2 mouse cable ADB mouse cable Serial mouse cable RS-232C cable S-video cable with mini DIN 4-pin jack Audio/video cable Component video cable Audio/video cable or Audio cable with RCA jack NOTE About Plug-and-Play Capability • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted. • Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices). • Please use the standard drivers as this projector is a Plug-and-Play monitor. • Plug-and-Play may not function properly with some type of computers. Use the RGB IN 2 port if Plug-and-Play does not function correctly. 9