3M X95 Safety Guide - Page 10

ENGLISH Lamp Lamp Operation: The following symptoms may indicate a lamp in need of replacement: • LAMP indicator lights up red. WARNING • To reduce the risk associated with environmental contamination due to mercury in the projection lamp: - Dispose of lamp cartridge in accordance with applicable federal, state and local regulations. - The lamp in this product contains mercury. Dispose of projection lamp in a manner that is consistent with your local hazardous waste regulations for mercury. - For recycling and disposal information, contact your respective governmental agencies. In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at www.lamprecycle.org In Canada, contact 1-800-364-3577 (3M Canada) Display Lamp Operation Hours To determine the lamp operation hours, follow these steps: 1. While the projector is running, press the MENU button on the remote control. Choose the "OPTION" using the źbutton, and press the Źbutton or the ENTER button. Choose the "LAMP TIME" using the źbutton. 2. The operating time of the lamp will be displayed. The lamp time is the time counted after the last resetting. ¥Note Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. Reset Lamp Hours (1) Press the MENU button to display a menu. Only when the EASY MENU has appeared, please perform the next step (2).   3RLQWDWWKH³*R7R$GYDQFH0HQX«´LQWKHPHQXXVLQJźŸEXWWRQWKHQSUHVVWKH ŹEXWWRQ   3RLQWDWWKH³237,21´LQWKHOHIWFROXPQRIWKHPHQXXVLQJźŸEXWWRQWKHQSUHVV WKHŹEXWWRQ   3RLQWDWWKH´/$037,0(´XVLQJźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ$GLDORJZLOO appear.   3UHVVWKHŸEXWWRQWRVHOHFW³5(6(7´RQWKHGLDORJ,WSHUIRUPVUHVHWWLQJWKHODPS time. 10 3M™ Digital Projector X95 Product Safety Guide © 3M 2007