3M X95 Safety Guide - Page 12

ENGLISH ¥Note For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass. Also, do not install an old or previously used lamp. 1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide the lamp door to the side to remove it. (2) 2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by arrow). (3) ¥Note All lamp module screws must be loosened. These screws are self-containing screws that cannot be removed from the lamp module or access door. 3. Remove lamp module: Slowly pick up the lamp module by the handles. (4) 4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated. Tighten the lamp module retaining screws (3) to secure the lamp module in place. Optional Lamp: 78-6969-9930-5 (Contact 3M Customer Service.) 6OLGHWKHODPSGRRU EDFNLQSODFHDQG¿UPO\IDVWHQWKHODPSGRRUDVFUHZ ¥Note Reset the lamp operation hours. See "Reset Lamp Hours" for details. (3) Screws (1) Screw (2) Lamp access door (4) Handle 12 3M™ Digital Projector X95 Product Safety Guide © 3M 2007