3M X95 Safety Guide - Page 6

ENGLISH WARNING • To reduce the risk associated with choking: - Keep the battery away from children and pets. • To reduce the risk associated with exposure to hazardous voltage: - Disconnect power cord when the projector is not in use, during lamp replacement, and while cleaning.   'RQRWUHPRYHDQ\VFUHZVRWKHUWKDQWKRVHVSHFL¿HGLQWKHODPSUHSODFHPHQW instructions. - Do not store or operate this projector in wet environments. - Do not modify this projector. - Do not attempt to service the projector - there are no user serviceable parts, other than the lamp cartridge, inside the projector. Contact a 3M authorized service provider for service. - Do not allow water or other liquids to enter the projector. • To reduce the risk associated with environmental contamination due to mercury in the projection lamp: - Dispose of lamp cartridge in accordance with applicable federal, state and local regulations. - The lamp in this product contains mercury. Dispose of projection lamp in a manner that is consistent with your local hazardous waste regulations for mercury. - For recycling and disposal information, contact your respective governmental agencies. In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at www.lamprecycle.org In Canada, contact 1-800-364-3577 (3M Canada) ‡ 7RUHGXFHWKHULVNDVVRFLDWHGZLWKH[SRVXUHWRKD]DUGRXVYROWDJHDQGRU¿UH - Replace power cord if damaged. - Contact a 3M authorized service provider if the projector becomes damaged. - Use a grounded extension cord with a rating at least equal to that of the projector. - Connect this projector to a grounded outlet. • To reduce the risk associated with hazardous voltage, impact, tripping, and intense visible light: - Do not use this projector around unsupervised children. • To reduce the risk associated with hot surface of lamp cartridge: - Unplug the projector from the electrical outlet and allow the lamp to cool for 45 minutes before replacing the lamp. • To reduce the risk associated with a ruptured lamp: - Always handle the fragile lamp module with care. - Remove the projector from the ceiling or wall mount before replacing the lamp. - Use care when replacing the lamp module in the event of a lamp rupture - small glass particles and small amounts of mercury may be present. - Ventilate the area where the lamp rupture occurred. - Wear safety goggles and gloves when cleaning up ruptured lamp debris. - Carefully collect the ruptured lamp debris in a closed container and dispose of the container and the expired lamp module in accordance with federal, state, and local regulations. - Wash your hands thoroughly after handling ruptured lamp debris. - Replace the lamp module when the lamp replacement message appears. - Never replace the lamp module with a previously used lamp module. 6 3M™ Digital Projector X95 Product Safety Guide © 3M 2007