3M X95 Safety Guide - Page 13

ENGLISH Remote control Putting batteries Please load the batteries before using the remote control. If the remote control starts to malfunction, replace the batteries. If you will not use the remote control for an extended period, remove the batteries from the remote control and store them in a safe place. 1. Slide back and remove the battery cover in the direction of the arrow. 2. Align and insert the two AA batteries (HITACHI MAXELL Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into place. WARNING • Always handle the batteries with care and use them only as directed. Improper use PD\UHVXOWLQEDWWHU\H[SORVLRQFUDFNLQJRUOHDNDJHZKLFKFRXOGUHVXOWLQ¿UHLQMXU\ and/or pollution of the surrounding environment.: - %HVXUHWRXVHRQO\WKHEDWWHULHVVSHFL¿HG'RQRWXVHEDWWHULHVRIGLIIHUHQWW\SHV at the same time. Do not mix a new battery with used one. - Make sure the plus and minus terminals are correctly aligned when loading a battery. - Keep a battery away from children and pets. - Do not recharge, short circuit, solder or disassemble a battery. - 'RQRWDOORZDEDWWHU\LQD¿UHRUZDWHU.HHSEDWWHULHVLQDGDUNFRRODQGGU\SODFH - If you observe battery leakage, wipe out the battery residue and replace the battery. If the residue adheres to your body or clothes, rinse well with water immediately. - Obey the local laws on disposing the battery. © 3M 2007 3M™ Digital Projector X95 Product Safety Guide 13