3Ware 9500S-4LP Installation Guide - Page 27
Installing a Serial ATA RAID Controller with Multi-lane Internal Connectors
UPC - 693494950045
View all 3Ware 9500S-4LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing a Serial ATA RAID Controller with Multi-lane Internal Connectors Installing a Serial ATA RAID Controller with Multi-lane Internal Connectors I2C LED indicators for connector individual drives on J7, J8, and J9. The overall LED drive status indicator is on the last two pins of J7. Ports 8 to 11 Ports 4 to 7 Ports 0 to 3 Serial number (on plate) BBU (Battery Backup Unit) connector SODIMM (memory module) LED connector details J7 is for drives 0, 1, 2, 3 (top to bottom) The last two J8 is for drives 4, 5, 6, 7 (top to bottom) pins on J8 and J9 is for drives 8, 9, 10, 11 (top to bottom) J9 are unused. For more details, see page 16. Figure 5. 12-Port 3ware 9500S-12MI Serial ATA RAID Controller Models 9500S-12MI and 9500S-8MI, have multi-lane internal connectors, each of which can handle up to four drives. These controllers can be installed in an enclosure with a backplane. The type of cable you need will depend on the type of enclosure you have: For use with a backplane that has the InfiniBand 4x connectors (SFF-8470), use the InfiniBand 4x cable, which has multi-lane connectors on each end, as shown in Figure 6. www.3ware.com 19