3Ware 9500S-4LP Installation Guide - Page 32
Moving Legacy JBOD Units to a 9000 Controller - linux
UPC - 693494950045
View all 3Ware 9500S-4LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing the Hardware To move units under Linux or FreeBSD 1 Upgrade your driver to the 9000 series driver. (For details, refer to the Linux or FreeBSD Driver Installation section.) 2 Run the conversion utility to convert the units. 3 Power down the system, disconnect the drives from the 8000 controller and remove the controller from the system. 4 Install the 9000 controller and attach the drives to the 9000 board, as described earlier in this section. To move units under Windows 1 Install the 9000 controller in your system, while leaving the 8000 controller installed. 2 Install the Windows driver. (For details, see "Driver Installation Under Windows" on page 53.) 3 Run the conversion utility to convert the units. 4 Power down the system, disconnect the drives from the 7/8000 controller and remove that controller from the system. 5 Attach the drives to the 9000 board. Moving Legacy JBOD Units to a 9000 Controller To move legacy JBOD units under Linux or FreeBSD 1 Upgrade your driver to the 9000 series driver. 2 Power down the system, disconnect the drives from the 8000 controller and remove the controller from the system. 3 Install the 9000 controller and attach the drives to the 9000 board, as described earlier in this section. 24 3ware 9000 Series Serial ATA RAID Controller Installation Guide