AEG BP5304001W Product Manual - Page 29
Installation
View all AEG BP5304001W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installation 29 Problem Possible cause Solution The display shows C2 You want to start the pyrolytic Remove the food sensor plug cleaning or defrost function from the socket but you did not remove food sensor plug from the socket. The display shows F2 • The door is not closed correctly • The door lock is defect • Close the door correctly • Switch off the appliance with the house fuse or the safety switch in the fuse box and switch it on again • If the display shows F2 again, refer to the Customer Care Department The display shows an error code There is an electronic fault that is not in this list • Switch off the appliance with the house fuse or the safety switch in the fuse box and switch it on again • If the display shows the error code again, refer to the Customer Care Department If you cannot find a solution to the problem yourself, contact your dealer or the service centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) INSTALLATION WARNING! Refer to "Safety information" chapter. The built-in unit must meet the stability requirements of DIN 68930.