AEG KSK782220M User Manual - Page 10
Before First Use
View all AEG KSK782220M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10 www.aeg.com Symbol Weight Automatic Heat + Hold Function The display shows that the automatic weight system is active or that weight can be changed. The function is active. 5. BEFORE FIRST USE WARNING! Refer to Safety chapters. 5.1 Initial Cleaning Remove all accessories and removable shelf supports from the appliance. Refer to "Care and cleaning" chapter. Clean the appliance and the accessories before first use. Put the accessories and the removable shelf supports back to their initial position. 5.2 First Connection When you connect the appliance to the mains or after the power cut, you have to set the language, the display contrast, the display brightness and the time of the day. 1. Press 2. Press or to set the value. to confirm. 5.3 Setting the hardness level for the water When you connect the appliance to the mains, you have to set the water hardness level. The table below explains the water hardness range with the corresponding Calcium deposit (mmol/l) and the quality of the water. Water hardness Class dH 1 0 - 7 2 7 - 14 3 14 - 21 4 over 21 Calcium deposit (mmol/l) 0 - 1.3 1.3 - 2.5 2.5 - 3.8 over 3.8 Calcium deposit (mg/l) 0 - 50 50 - 100 100 - 150 over 150 Water classification Soft Moderately hard Hard Very hard When the water hardness exceeds the values in the table, fill the water drawer with bottled water. 1. Take the four colour change strip supplied with the steam set in the oven. 2. Put all the reaction zones of the strip into the water for approximately 1 second. Do not put the strip into the running water! 3. Shake the strip to remove the excess of the water.