AIWA NSX-V9000 Operating Instructions - Page 18

MICROPHONE MIXING 2 VOCALFAOER/ MULTIPLEX & r-- ! Two microphones (not supplied) can be connected to this unit, allowing you to sing along to music sources. Use microphones with mini plugs (03.5 mm, '/6 inch). Before connecting a microphone Set the MIC MIXING control to MIN. 1 Connect your microphones to the MIC 1 and MIC 2 jacks. MIC 1 MIC 2 2 Press one of the function buttons to select the source to be mixed, and .p-lav the source. 3 Adjust the volume and tone of the source. 4 Adjust the microphone volume with the MIC MIXING control. The volume of both micro~hones is adiusted simultaneously. 5 Adjust the echo with the DIGITAL ECHO control. To record microphone sound mixed with source sound Follow the procedure for recording from the sound source (see page 13). The SYNC DUB button cannot be used for mixing recording. When not using the microphones Set the MIC MIXING and DIGITAL ECHO controls to MIN and remove the microphones from the MIC jacks. q When a connected microphone is used, the SURROUND mode is automatically canceled. - If a microphone is held too near the speakers, a howling sound may be produced. In this case, hold the microphone away from the speakers, or decrease the sound level using the MIC MIXING control. q If sound through the microphone is extremely loud, it may be distorted. In this case, turn the MIC MIXING control toward MIN. Recommended microphones The use of unidirectional type microphones is recommended to prevent howling. Contact your local Aiwa dealer for details. 17 ENGLISH VOCAL FADEFUMULTIPLEX FUNCTIONS This unit can use discs or tapes as Karaoke sources. Press the VOCAL FADER/MULTIPLEX button repeatedly to select the vocal fader or multiplex function. Use the vocal fader function for ordinary discs or tapes. Use the multiplex function for multi audio discs or tapes. Each time the VOCAL FADER/MULTIPLEX button is pressed, one of these functions is selected cyclically. Vocal Fader The singer's voice becomes softer than the accompaniment. Auto Vocal Fader*l The singer's voice becomes softer only while there is audio input through a microphone. Multiplex'z The sound on the left (or right)channel is heard from both speakers, and the sound on the right (or left) channel is muted. Auto Multiplex*l The sound on the left (or right) channel is heard from both speakers, and the sound on the right (or left) channel is muted only while there is audio input through a microphone. Cancel q ' To change the time lag setting of the Auto Vocal Fader or Auto Multiplex function - When Auto Vocal Fader or Auto Multiplex is selected, "A-VF" or "A-MPX is displayed for 3 seconds and changes to the selected function name. After the selected function name is displayed, hold down the VOCAL FADER/MULTIPLEX button until the desired time lag setting, SLOW or FAST, is selected. SLOW Fade-out of original singer's voice returns to the normal level if there is no audio input from the microphone within 2 seconds. FAST Fade out of original singer's voice returns to the normal level if there is no audio input from the microphone within 0.5 seconds. When the power is turned off, the Auto vocal fader and Auto multiplex restore to SLOW. *2 To change tfle muted channel of the MultiPlex function When Multiplex is selected, "MPX-L" is displayed for 3 seconds and changes to the selected function name. After the selected function name is displayed, hold down the VOCAL FADER/ MULTIPLEX button until the channel to be output from both speakers, MPX-L or MPX-R, is selected. MPX-L The sound on the left channel is heard from both speakers and the sound on the right channel is muted. MPX-R The sound on the right channel is heard from both speakers and the sound on the left channel is muted. When the power is turned off, the Multiplex restores to MPX-L. When using the remote control Press the KARAOKE button. m q The VOCAL FADER functions may not operate correctly with the followina kinds of CDs or ta~es. - Those wit~ monaural sound " - Those recorded with strong echoes - Those with the vocal part recorded on the right or left side of the sound width q While the VOCAL FADER function is on, the sound is output as monaural.