AIWA XR-M35 Operating Instructions - Page 12

OPERATION TAPEIREV MODE II EJECT MULTI JOG MODE PLAYING BACK A TAPE Insert a tape 7 Press the MODE button repeatedly until "DOLBY" appears on the display. Then, turn the MULTI JOG dial right or left to turn Dolby NR on or off to match the playback tape within 10 seconds. INSERTING TAPES . You can select a reverse mode to play back one or both sides. q Use Type I (normal), Type II (high/CrOd OrTwe Iv (metal) tapes for playback. Press the TAPE/REV MODE button and press the EJECT mark to open the cassette holder. I-EJECT Insert a tape with the exposed side down. Push the cassette holder to close. To select a reverse mode Each time the TAPE/REV MODE mode changes. button is pressed, the reverse For tapes recorded with DOLBY NR, turn on no NR. For tapes recorded without DOLBY NR, turn off DU NR. 2 Press the + ® button to start play. Playback side of the tape The tape counter indicates the tape running length. (It disappears when no tape is inserted.) D: The front side is being played (forward). ~: The back side is being played (reverse). To stop play, press the s button. To pause play, press the II button. To resume play, press again. To change the playback side, press the +> button in play or pause mode. To fast forward or rewind, press the - or> button in stop mode. Then press the s button to stop the tape. To start play when the power is off (Direct Play Function) Press the TAPE button. The power is turned on and play of the inserted tape begins. To set the tape counter to 0000 Press the s button in stop mode. The counter is also set to 0000 when the cassette opened. holder is To play one side only, select Z. To play from front side to back side once only, select Z). To play both sides repeatedly, select (Z). I 1 ENGLISH