ASRock 775S61 User Manual - Page 24
OnBoard VGA Share Memory
View all ASRock 775S61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chipset Configuration: Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Chipset Configuration [ Setup Help ] AGP Aperture Size Onboard VGA Share Memory USB Controller USB Device Legacy Support USB 2.0 Controller DRAM CAS# Latency MA 1T/2T Select Vccm Voltage Defer Function CPU Thermal Throttling No-Excute Memory Protection AGP / PCI Fix Frequency F1:Help Esc:Previous Menu :Select Item 64MB Auto Enabled Disabled Enabled Auto MA2T 2.62V Auto Enabled Enabled Sync. +/-:Change Values Enter:Select Sub-Menu to select the size of mapped memory for graphics data. F9:Setup Defaults F10:Save & Exit AGP Aperture Size: It refers to a section of the PCI memory address range used for graphics memory. It is recommended to leave this field at the default value unless your AGP card requires other sizes. OnBoard VGA Share Memory: This allows you to select the size of share memory for onboard VGA. Onboard VGA will get better resolution if larger size of share memory is selected. USB Controller: Use this to enable or disable the use of USB controller. USB Device Legacy Support: Use this to enable or disable support to emulate legacy I/O devices such as mouse, keyboard,... etc. USB 2.0 Controller: Use this to enable or disable the use of USB 2.0 controller. DRAM CAS# Latency: This parameter controls the latency between the read command and the time the data available. MA 1T/2T Select: Use this item to meet the timing and loading condition for optimized result of DRAM address/control signals. The default value of this item is [MA2T], and other configuration options are [Auto] and [MA1T]. Vccm Voltage: Use this to select VCCM voltage between [2.62V] and [2.55V]. Defer Function: It allows you to adjust defer function.The default setting is [Auto]. CPU Thermal Throttling: Select [Enabled] will enable P4 thermal control cir cuit to keep CPU from overheated. 24