ASRock AM2V890-VSTA Quick Installation Guide - Page 12
English, Expansion Slots PCI Slots and PCIE Slots, Installing an expansion card
View all ASRock AM2V890-VSTA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2.3 Expansion Slots (PCI Slots and PCIE Slots) There are 3 PCI slots and 3 PCI Express slots on AM2V890-VSTA motherboard. PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE Slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane width graphics cards. PCIE2 (PCIE x1 slot) is used for PCI Express cards with x1 lane width graphics cards, such as Gigabit LAN card, SATA2 card, etc. Please check the jumper settings on page 13 for different functions. PCIE3 (PCIE x4 / x1 slot) is used for PCI Express cards with x4 / x1 lane width graphics cards. Please check the jumper settings on page 13 for different functions. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. 12 ASRock AM2V890-VSTA Motherboard English