ASRock ConRoe1333-eSATA2 Quick Installation Guide - Page 15

2.5 CrossFireTM Operation Guide This motherboard supports CrossFireTM feature. CrossFireTM technology offers the most advantageous means available of combining multiple high performance Graphics Processing Units (GPU) in a single PC. Combining a range of different operating modes with intelligent software design and an innovative interconnect mechanism, CrossFireTM enables the highest possible level of performance and image quality in any 3D application. Currently CrossFireTM feature is supported with Windows® XP with Service Pack 2. Please check ATITM website for driver updates. What graphics cards work with CrossFireTM? A complete CrossFireTM system requires a CrossFireTM Ready motherboard, a CrossFireTM Edition graphics card and a compatible standard Radeon (CrossFireTM Ready) graphics card from the same series, or two CrossFireTM Ready cards if they are software enabled. This applies to cards from ATITM or any of its partners. Cards For AGI Express Slot Radeon X1950Pro Series Radeon X1950XTX Series Radeon X1950 Series Radeon X1900 Series Radeon X1800 Series Radeon X1650Pro Series Radeon X1600 Series Radeon X1300 Series Radeon X850 Series Cards For PCIE1 Slot Radeon X1950Pro Series Radeon X1950XTX CrossFireTM Edition Radeon X1950 CrossFireTM Edition Radeon X1900 CrossFireTM Edition Radeon X1800 CrossFireTM Edition Radeon X1650Pro Series Radeon X1600 Series Radeon X1300 Series Radeon X850 CrossFireTM Edition 1. If a customer incorrectly configures their system they will not see the performance benefits of CrossFireTM. All three CrossFireTM components, a CrossFireTM Ready graphics card, a CrossFireTM Ready motherboard and a CrossFireTM Edition co-processor graphics card, must be installed correctly to benefit from the CrossFireTM multi-GPU platform. 2. If you pair a 12-pipe CrossFireTM Edition card with a 16-pipe card, both cards will operate as 12-pipe cards while in CrossFireTM mode. Enjoy the benefit of CrossFireTM Currently, ATITM has released Radeon X850XT, X1800XT, X1900XT, X1950XT, X1950Pro, X1950XTX, X1300, X1650 and X1600 CrossFireTM cards, which require different methods to enable CrossFireTM feature. In the below procedures, we use Radeon X850XT as the example graphics card. For other CrossFireTM cards that ATITM has released or will release in the future, please refer to ATITM graphics card manuals for detailed installation guide. Step 1. Connect to the system power supply. Please connect a hard disk power connector to SLI/XFIRE Power connector on this motherboard. It is recommended to use 500-Watt power supply or greater to perform the benefit of CrossFireTM feature for Radeon X850XT, X1900 and X1950 series. 15 ASRock ConRoe1333-eSATA2 Motherboard English