ASRock Fatal1ty X79 Champion Quick Installation Guide - Page 50
RESET Reset Switch, PLED System Power LED, HDLED Hard Drive Activity LED
View all ASRock Fatal1ty X79 Champion manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
RESET (Reset Switch): Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart. PLED (System Power LED): Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5). HDLED (Hard Drive Activity LED): Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data. The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly. Chassis Speaker Header (4-pin SPEAKER 1) (see p.4 No. 28) Please connect the chassis speaker to this header. Power LED Header (3-pin PLED1) (see p.4 No. 24 Please connect the chassis power LED to this header to indicate system power status. The LED is on when the system is operating. The LED keeps blinking in S1/S3 state. The LED is off in S4 state or S5 state (power off). Chassis and Power Fan Connectors Please connect the fan cables (4-pin CHA_FAN1) FAN_SPEED_CONTROL CHA_FAN_SPEED (see p.4 No. 30) +12V GND to the fan connectors and match the black wire to the ground pin. CHA_FAN1, CHA_FAN2 and CHA_FAN3 support Fan (3-pin CHA_FAN2) CHA_FAN_SPEED +12V (see p.4 No. 29) GND Control. 50 Fatal1ty X79 Champion Series Motherboard English