ASRock Penryn1600SLIX3-WiFi User Manual - Page 28

eSATAII Connector (eSATAII_TOP: see p.11, No. 37) eSATAII_TOP Serial ATA (SATA) Data Cable (Optional) Serial ATA (SATA) Power Cable (Optional) connect to the SATA HDD power connector connect to the power supply WiFi/E Header (15-pin WIFI/E) (see p.11 No. 35) USB+5V_2 TXN TXP GND2 PCIE_RST# +3SVB RX N RXP 1 GND1 D0-D0+ PexCLK PexCLK# USB+5V_1 Dummy USB 2.0 Headers (9-pin USB6_7) (see p.11 No. 19) USB_PWR P-7 P+7 GND DUMMY 1 GND P+6 P-6 USB_PWR This eSATAII connector supports SATA data cable for external SATAII function. The current eSATAII interface allows up to 3.0 Gb/s data transfer rate. Either end of the SATA data cable can be connected to the SATA / SATAII hard disk or the SATAII connector on this motherboard. You can also use the SATA data cable to connect SATAII_6 (PORT3.1) connector and eSATAII connector. Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. This header supports WiFi+AP function with ASRock WiFi-802.11g or WiFi-802.11n module, an easy-to-use wireless local area network (WLAN) adapter. It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity. Besides four default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. 28