ASRock X99 Taichi User Manual - Page 31
Front Panel Audio Header, pin CHA_FAN3 - manual
View all ASRock X99 Taichi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
X99 Taichi USB 3.0 Header (19-pin USB3_1_2) (see p.7, No. 10) Vbus IntA_PA_SSRXIntA_PA_SSRX+ GND IntA_PA_SSTXIntA_PA_SSTX+ GND IntA_PA_DIntA_PA_D+ Vbus IntA_PB_SSRXIntA_PB_SSRX+ GND IntA_PB_SSTXIntA_PB_SSTX+ GND IntA_PB_DIntA_PB_D+ Dummy 1 There is one USB 3.0 header on this motherboard. This USB 3.0 header can support two ports. Front Panel Audio Header (9-pin HD_AUDIO1) (see p.7, No. 27) GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L This header is for connecting audio devices to the front audio panel. 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Fan Connectors (4-pin CHA_FAN1) (see p.7, No. 28) (3-pin CHA_FAN2) (see p.7, No. 12) (3-pin CHA_FAN3) (see p.7, No. 9) GND FAN_VOLTAGE CHA_FAN_SPEED FAN_SPEED_CONTROL FAN_SPEED_CONTROL CHA_FAN_SPEED FAN_VOLTAGE GND GND FAN_VOLTAGE CHA_FAN_SPEED FAN_SPEED_CONTROL Please connect fan cables to the fan connectors and match the black wire to the ground pin. CHA_ FAN fan speed can be controlled through UEFI or A-Tuning. 25 English