Aastra 5361 User manual Aastra 5361/5361ip - Page 107

Connecting the power supply, Logging the IP phone, the power socket.

Page 107 highlights

Installation and first-time operation Connecting the power supply If your LAN supports Power-Over-Ethernet (PoE), the phone will be powered via the LAN cord and you will not require a power adapter. If your LAN does not support PoE or if you have installed a switch between the LAN and the phone that does not support PoE, you will need the optional power adapter to power the phone. Note: Only use the optional original plug-in power adapter. • Plug the round connector of the power cord on the underside of the phone into the power socket. • Desk installation only: To relieve the strain on the cable feed the cable through one of the cable guides on the stand rest. • Connect the power supply to the mains power. Logging the IP phone Your system administrator has to prepare the system before you can log on your phone. Aastra 5361/Aastra 5361ip eud-1280/1.2 - R3.0 - 04.2013 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115

Installation and first-time operation
Aastra 5361/Aastra 5361ip
107
eud-1280/1.2 – R3.0 – 04.2013
Connecting the power supply
If your LAN supports Power-Over-Ethernet (PoE), the phone will be powered via the
LAN cord and you will not require a power adapter.
If your LAN does not support PoE or if you have installed a switch between the LAN
and the phone that does not support PoE, you will need the optional power adapter
to power the phone.
Plug the round connector of the power cord on the underside of the phone into
the power socket.
Desk installation only: To relieve the strain on the cable feed the cable through one
of the cable guides on the stand rest.
Connect the power supply to the mains power.
Logging the IP phone
Your system administrator has to prepare the system before you can log on your
phone.
Note:
Only use the optional original plug-in power adapter.