Aastra OpenCom 131 User Guide - Page 41
OpenCom 150, Installing Interface Cards
View all Aastra OpenCom 131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installation Available Ports ■ One slot to incorporate a doorstation equipment interface card. The following ports can be used with such a card: two actor ports for connection to a door opener and the intercom of doorstation equipment. These are designed as pressure terminals (actor1 to activate a door opener and actor2 to activate doorstation equipment); three sensor ports for connection to the bell keys of doorstation equipment, designed as pressure terminals (sensor 1 to sensor 3) ■ One slot to incorporate a V.24 interface card. The following port can be used with the V.24 add-on card: one COM port to connect to a PC to configure and transmit connection data, designed as an RJ45 jack ■ One port to the LAN (10BaseT), designed as an RJ45 jack ■ One CompactFlash socket to incorporate a type I or type II CompactFlash memory card. These cards are necessary to operate the OpenVoice and OpenAttendant programme packages. Only use high speed memory cards which are recommended by Aastra. Other memory cards or "Microdrive" type memory cards may not be able to maintain the required access speed. Tip: For the stored voice announcements and a recording time of one hour a memory card with 32 Mbyte is required. ■ One port jack to connect the plug-in power supply. Only use the original OpenCom 131 plug-in power supply provided in the supply scope. 3.8.3 OpenCom 150 The listed interfaces and ports are located on the main module or on the connection module of the OpenCom 150. Further interfaces and ports can be added by installing additional interface cards (see Installing Interface Cards starting on page 30). ■ One slot to incorporate a double doorstation equipment interface card. The following ports can be used with such a card: 39