Acer Altos G301 Acer Altos G301 User's Guide - Page 137
Checkpoint Code, Description, The EGA/VGA controller was not found. The display
![]() |
View all Acer Altos G301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
125 Checkpoint Code Description 25h Interrupt vector initialization is done. Clearing the password if the POST DIAG switch is on. 27h Any initialization before setting video mode will be done next. 28h Initialization before setting the video mode is complete. Configuring the monochrome mode and color mode settings next. 2Ah Bus initialization system, static, output devices will be done next, if present. See page 131 for additional information. 2Bh Passing control to the video ROM to perform any required configuration before the video ROM test. 2Ch All necessary processing before passing control to the video ROM is done. Looking for the video ROM next and passing control to it. 2Dh The video ROM has returned control to BIOS POST. Performing any required processing after the video ROM had control. 2Eh Completed post-video ROM test processing. If the EGA/VGA controller is not found, performing the display memory read/write test next. 2Fh The EGA/VGA controller was not found. The display memory read/write test is about to begin. 30h The display memory read/write test passed. Look for retrace checking next. 31h The display memory read/write test or retrace checking failed. Performing the alternate display memory read/write test next. 32h The alternate display memory read/write test passed. Looking for alternate display retrace checking next. 34h Video display checking is over. Setting the display mode next.
![](/manual_guide/products/acer-computers-altos-g301-acer-altos-g301-users-guide-8fca87b/137.png)