Acer Altos G330 MK2 User Manual - Page 118

Initializing the RAID volume, Assigning a Hot Spare Disk, Save and Exit LSI RAID Configuration Utility

Get Acer Altos G330 MK2 PDF manuals and user guides View all Acer Altos G330 MK2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

100 Appendix A: Server management tools 9 Select YES to save the configuration, then press any key to return to the Configuration menu. Initializing the RAID volume 1 Press Esc to return to the Management menu. 2 Select Initialize from the Management menu. All logical drives should be listed under Logical Drives. 3 Press the space bar to select the drives for initialization. The selected drive will be shown in yellow. 4 Press F10, then select YES to start the initialization process. 5 Once initialization is complete, press any key to continue. 6 Press Esc to return to the Management menu. 7 Press Esc, then select YES to close the configuration utility. Press Ctrl+Alt+Del to reboot the system, then proceed to the OS installation. Assigning a Hot Spare Disk 1 Select Objects from Management menu. 2 Select Physical Drive from Objects. All of the HDDs will be listed. 3 Select a drive marked as READY and press Enter. 4 Select Make Hot Spare and press Enter. 5 Select Yes then you will see the HDD is changed from READY to HOTSP. 6 Press ESC to return to the Management Menu. Save and Exit LSI RAID Configuration Utility 1 When RAID configuration, initialization and assigning hot spare is completed, press ESC in the Management Menu and select YES to exit the RAID Configuration Utility. 2 Press Ctrl + Alt + Del to reboot the server. 3 Now you can start to install OS.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
Appendix A: Server management tools
100
9
Select
YES
to save the configuration, then press any key to return
to the Configuration
menu.
Initializing the RAID volume
1
Press
Esc
to return to the Management
menu.
2
Select
Initialize
from the Management
menu.
All logical drives should be listed under Logical Drives.
3
Press the space bar to select the drives for initialization.
The selected drive will be shown in yellow.
4
Press
F10
, then select
YES
to start the initialization process.
5
Once initialization is complete, press any key to continue.
6
Press
Esc
to return to the Management
menu.
7
Press
Esc
, then select
YES
to close the configuration utility.
Press
Ctrl
+
Alt
+
Del
to reboot the system, then proceed to the OS
installation.
Assigning a Hot Spare Disk
1
Select Objects from Management menu.
2
Select
Physical Drive
from
Objects
. All of the HDDs will be listed.
3
Select a drive marked as
READY
and press
Enter
.
4
Select
Make Hot Spare
and press
Enter
.
5
Select
Yes
then you will see the HDD is changed from
READY
to
HOTSP
.
6
Press
ESC
to return to the
Management Menu
.
Save and Exit LSI RAID Configuration Utility
1
When RAID configuration, initialization and assigning hot spare is
completed, press
ESC
in the Management Menu and select
YES
to
exit the RAID Configuration Utility.
2
Press
Ctrl + Alt + Del
to reboot the server.
3
Now you can start to install OS.