Acer Altos G330 MK2 User Manual - Page 91
Setting a system password, Supervisor Password or Set User Password, then press
View all Acer Altos G330 MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
73 Parameter Supervisor Password Is Description This parameter indicates whether a supervisor password has been assigned. Option Clear Enabled User Password Is This parameter indicates whether a user password has been assigned. Clear Enabled Set Supervisor Password Press Enter to configure the supervisor password. Set User Password Press Enter to configure the user password. Password On Boot Select Enabled to activate security check during POST. Disabled Enabled TPM Support Enable/Disable Trusted Platform Module support Disabled Enabled Setting a system password 1 Use the up/down keys to select a password parameter (Set Supervisor Password or Set User Password), then press Enter. A password box will appear. 2 Type a password then press Enter. The password may consist of up to six alphanumeric characters (A-Z, a-z, 0-9). 3 Retype the password to verify the first entry then press Enter again. 4 Press F10. 5 Select Yes to save the new password and close the Setup Utility.