Acer Altos G330 MK2 User Manual - Page 49
Opening the server, Removing the side panel
View all Acer Altos G330 MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
31 Opening the server Caution: Before you proceed, make sure that you have turned off the system and all peripherals connected to it. Read the "Pre-installation instructions" section page 30. You need to open the server before you can install upgrade components. The front bezels and (left) side panel are removable to allow access to the server's internal components. Refer to the following sections for instructions. Removing the side panel 1 Perform the pre-installation instructions described on page 30. 2 Open the HDD bay bezel. (1) If necessary, insert the key into the lock and turn it counterclockwise until it points to the unlock icon. (2) Open the lower bezel to a 90° angle. 3 Remove the side panel. (1) Loosen the two screws located on the rear edge of the side panel. (2) Move the side panel release latch all the way down to unfasten the panel from the chassis.