Acer Altos G330 MK2 User Manual - Page 69
Installing the BMC module
View all Acer Altos G330 MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
51 Installing the BMC module The optional BMC module allows system administrators to manage the Altos G330 Mk2 system remotely over a network. To install the BMC module: 1 Perform the pre-installation instructions described on page 30. 2 Locate the IPMI_1 slot. If necessary, remove any boards or cables that prevent access to it. 3 If necessary, open the holding clips of the IPMI_1 slot. 4 Remove the BMC module from its protective packaging, handling it by the edges. 5 Install the BMC module. (1) Align the module so that the notch on the IPMI_1 slot fits the keyed edge of the module, then press the module at both ends to seat it fully into the slot. When the module is properly installed, the holding clips will automatically lock in place. (2) Secure the module with the one screw. 6 Observe the post-installation instructions described on page 30.