Acer Altos G510 Altos G510 User's Guide - Page 54
Configuring the Hot Plug HDD cage, To remove the Hot Plug HDD cage
View all Acer Altos G510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
44 3 Upgrading the system Configuring the Hot Plug HDD cage This section includes instructions for removing and installing the Hot Plug HDD cage as well as procedures on how to install a hard disk into the cage's hard disk carrier. Note: The Hot Plug HDD cage feature is only applicable to the Altos G510 model. To remove the Hot Plug HDD cage Important: Before detaching the Hot Plug HDD cage from the chassis, make sure to first remove all hard disks from their carriers. For instructions, refer to the succeeding section. 1 Remove the front bezel, inner front panel, side panel and air baffle. Refer to the previous section for detailed intructions. 2 Disconnect the following cables from the cage: a SCSI cable b SCSI HDD 6 pin management cable c SCSI HDD power cable 3 Loosen the four thumbscrews that secure the cage to the chassis (1).