Acer Altos G510 Altos G510 User's Guide - Page 68
Processor Sequence, To install a CPU with heatsink, To install the CPU to its socket
View all Acer Altos G510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
58 3 Upgrading the system Processor Sequence If only one CPU is to be installed, it must be installed in the CPU 1 socket; if such is the case, the CPU 2 socket no longer requires a termination module. When installing multiple processors, install them in the order shown below. To install a CPU with heatsink 1 Observe the ESD precautions and pre-installation procedures described on page 37. 2 Locate the CPU socket on the mainboard. 3 Align the CPU to its socket, making sure that pin 1 (indicated by the notched corner) of the CPU connects to hole 1 of the socket (on the bottom right corner). 4 To install the CPU to its socket, follow the steps below: (1) Insert the CPU into the socket. (2) Replace the heatsink on top of the CPU. (2) Press down the locking levers to lock the heatsink and CPU in